/*******************************************************************************
 * 
 * ttn-esp32 - The Things Network device library for ESP-IDF / SX127x
 * 
 * Copyright (c) 2021 Manuel Bleichenbacher
 * 
 * Licensed under MIT License
 * https://opensource.org/licenses/MIT
 *
 * Sample program (in C) sending messages and powering off in-between.
 *******************************************************************************/

#include "freertos/FreeRTOS.h"
#include "esp_event.h"
#include "driver/gpio.h"
#include "nvs_flash.h"
#include "esp_log.h"
#include "esp_sleep.h"

#include "ttn.h"

// NOTE:
// The LoRaWAN frequency and the radio chip must be configured by running 'idf.py menuconfig'.
// Go to Components / The Things Network, select the appropriate values and save.

// Copy the below hex strings from the TTN console (Applications > Your application > End devices
// > Your device > Activation information)

// AppEUI (sometimes called JoinEUI)
const char *appEui = "????????????????";
// DevEUI
const char *devEui = "????????????????";
// AppKey
const char *appKey = "????????????????????????????????";

// Pins and other resources
#define TTN_SPI_HOST      SPI2_HOST
#define TTN_SPI_DMA_CHAN  SPI_DMA_DISABLED
#define TTN_PIN_SPI_SCLK  5
#define TTN_PIN_SPI_MOSI  27
#define TTN_PIN_SPI_MISO  19
#define TTN_PIN_NSS       18
#define TTN_PIN_RXTX      TTN_NOT_CONNECTED
#define TTN_PIN_RST       14
#define TTN_PIN_DIO0      26
#define TTN_PIN_DIO1      35

#define TX_INTERVAL 60 // in sec
static uint8_t msgData[] = "Hello, world";


void messageReceived(const uint8_t* message, size_t length, ttn_port_t port)
{
    printf("Message of %d bytes received on port %d:", length, port);
    for (int i = 0; i < length; i++)
        printf(" %02x", message[i]);
    printf("\n");
}

void app_main(void)
{
    esp_err_t err;
    // Initialize the GPIO ISR handler service
    err = gpio_install_isr_service(ESP_INTR_FLAG_IRAM);
    ESP_ERROR_CHECK(err);
    
    // Initialize the NVS (non-volatile storage) for saving and restoring the keys
    err = nvs_flash_init();
    ESP_ERROR_CHECK(err);

    // Initialize SPI bus
    spi_bus_config_t spi_bus_config = {
        .miso_io_num = TTN_PIN_SPI_MISO,
        .mosi_io_num = TTN_PIN_SPI_MOSI,
        .sclk_io_num = TTN_PIN_SPI_SCLK,
        .quadwp_io_num = -1,
        .quadhd_io_num = -1
    }; 
    err = spi_bus_initialize(TTN_SPI_HOST, &spi_bus_config, TTN_SPI_DMA_CHAN);
    ESP_ERROR_CHECK(err);

    // Initialize TTN
    ttn_init();

    // Configure the SX127x pins
    ttn_configure_pins(TTN_SPI_HOST, TTN_PIN_NSS, TTN_PIN_RXTX, TTN_PIN_RST, TTN_PIN_DIO0, TTN_PIN_DIO1);

    // The below line can be commented after the first run as the data is saved in NVS
    ttn_provision(devEui, appEui, appKey);

    // Register callback for received messages
    ttn_on_message(messageReceived);

    // ttn_set_adr_enabled(false);
    // ttn_set_data_rate(TTN_DR_US915_SF7);
    // ttn_set_max_tx_pow(14);

    if (ttn_resume_after_power_off(60)) {
        printf("Resumed from power off.\n");
    
    } else {

        printf("Joining...\n");
        if (ttn_join())
        {
            printf("Joined.\n");
        }
        else
        {
            printf("Join failed. Goodbye\n");
            return;
        }
    }

    printf("Sending message...\n");
    ttn_response_code_t res = ttn_transmit_message(msgData, sizeof(msgData) - 1, 1, false);
    printf(res == TTN_SUCCESSFUL_TRANSMISSION ? "Message sent.\n" : "Transmission failed.\n");

    // Wait until TTN communication is idle and save state
    ttn_wait_for_idle();
    ttn_prepare_for_power_off();

    printf("Power off...\n");
    // Do whatever is needed to power off the device.
    // For testing, press reset button to simulate power cycle.
    while (true)
        vTaskDelay(pdMS_TO_TICKS(1000));
}