116 lines
3.4 KiB
Plaintext
116 lines
3.4 KiB
Plaintext
Version 0.4
|
|
Stand: 22.06.2018
|
|
----------------------------------------------------------------------------
|
|
User: pi PW: qaws
|
|
User: root PW: qaws
|
|
---------------------------------------------------------------------------
|
|
1) neustes Rasbian Lite Image auf SD-Card schreiben
|
|
|
|
2) per UART SSH aktivieren User: pi PW: raspberry
|
|
|
|
3) per SSH einloggen mit User: pi PW: raspberry
|
|
3.1) Root-Nutzer freigenen:
|
|
3.1.1) --> PW: qaws
|
|
3.1.2) sudo nano /etc/ssh/sshd_config <-- die Berechtigung für rootssh setzten, PermitRootLogin yes
|
|
3.1.3) sudo nano /etc/ssh/sshd_config <-- Banner /home/pi/banner.txt
|
|
3.1.3) sudo reboot
|
|
|
|
4) mit root einloggen:
|
|
4.1) raspi-config
|
|
4.1.1) Change User Password --> User: pi PW: qaws
|
|
4.1.2) Boot Options --> CLI ohne auto loggin
|
|
4.1.3) Localisation Options
|
|
4.1.3.1) Change Locale --> DE@de-UTF8
|
|
4.1.3.2) Change Timezone --> Berlin
|
|
4.1.4) Interfacing Options
|
|
4.1.4.1) enable Camera
|
|
4.1.4.2) enable SPI
|
|
4.1.4.3) enable I2C
|
|
4.1.5) Expand Filesystem
|
|
4.1.6) reboot
|
|
|
|
5) mit root einloggen
|
|
5.1) hostname -b TLCXX
|
|
5.2) apt-get update
|
|
5.3) apt-get upgrade
|
|
5.4) apt-get install watchdog ppp usb-modeswitch weavedconnectd python3-picamera usbmount screenfetch python3-RPi.GPIO python3-dev i2c-tools
|
|
5.5) Sakis
|
|
5.5.1) wget http://raspberry-at-home.com/files/sakis3g.tar.gz
|
|
5.5.2) mkdir /usr/bin/modem3g
|
|
5.5.3) chmod 777 /usr/bin/modem3g
|
|
5.5.4) cp sakis3g.tar.gz /usr/bin/modem3g
|
|
5.5.5) cd /usr/bin/modem3g
|
|
5.5.6) tar -zxvf sakis3g.tar.gz
|
|
5.5.7) chmod +x sakis3g
|
|
5.5.8) cd /root
|
|
5.6) Speedtest CLI
|
|
5.6.1) wget -O speedtest-cli https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py
|
|
5.6.2) chmod +x speedtest-cli
|
|
5.7) Swap deaktivieren
|
|
5.7.1) dphys-swapfile swapoff
|
|
5.7.2) systemctl disable dphys-swapfile
|
|
5.7.3) apt-get purge dphys-swapfile
|
|
5.8) Watchdog
|
|
5.8.1) modprobe bcm2835_wdt
|
|
5.8.2) echo "bcm2835_wdt" | tee -a /etc/modules
|
|
5.8.3) nano /etc/watchdog.conf
|
|
5.8.3.1) # entfernen bei: watchdog-device = /dev/watchdog UND max-load-1 = 24
|
|
5.8.4) nano /lib/systemd/system/watchdog.service
|
|
5.8.4.1) ergänzen um WantedBy=multi-user.target
|
|
5.8.5) systemctl enable watchdog.service
|
|
5.9) USB Mount
|
|
5.9.1) nano /etc/usbmount/usbmount.conf
|
|
5.9.2) FS_MOUNTOPTIONS="-fstype=vfat,gid=users,dmask=0007,fmask=0117" einfügen
|
|
5.10) SPI
|
|
5.10.1) wget https://github.com/doceme/py-spidev/archive/master.zip
|
|
5.10.2) unzip master.zip
|
|
5.10.3) cd py-spidev-master
|
|
5.10.4) python3 setup.py install
|
|
5.10.5) cd /root/
|
|
|
|
6) mit WinSCP als root einloggen
|
|
6.1) camera.py und config.txt in /home/pi/ kopieren <-- gehört user pi
|
|
6.2) /home/pi/picture_Number.txt erstellen und 0 eintragen
|
|
6.4) /home/pi/banner.txt kopieren
|
|
|
|
7) Auto Start
|
|
nano /etc/systemd/system/TLC.service
|
|
|
|
############ INSERT BEGIN #################
|
|
|
|
[Unit]
|
|
Description=TLC
|
|
After=syslog.target
|
|
|
|
[Service]
|
|
RestartSec=2s
|
|
Type=simple
|
|
User=root
|
|
Group=root
|
|
WorkingDirectory=/home/pi/
|
|
ExecStart=/usr/bin/python3.4 /home/pi/camera.py
|
|
Restart=always
|
|
RestartSec=2s
|
|
|
|
[Install]
|
|
WantedBy=multi-user.target
|
|
|
|
############ INSERT END #################
|
|
|
|
systemctl enable TLC.service
|
|
|
|
#debug
|
|
|
|
journalctl -u TLC.service
|
|
|
|
|
|
8) Banner
|
|
8.1) nano /root/.profile <-- /bin/cat /home/pi/banner.txt
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|