add input for Burner Error

main/inputs.c

@@ -0,0 +1,83 @@
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "driver/gpio.h"
+#include "esp_log.h"
+
+#include "inputs.h"
+
+static const char *TAG = "smart-oil-heater-control-system-inputs";
+const uint8_t uBurnerFaultPin = 19U;
+static eBurnerErrorState sBurnerErrorState;
+void loop(void *pvParameters);
+
+void initInputs(void)
+{
+
+    gpio_config_t ioConfBurnerFault = {
+        .pin_bit_mask = (1ULL << uBurnerFaultPin), // Pin mask
+        .mode = GPIO_MODE_INPUT,                   // Set as inout
+        .pull_up_en = GPIO_PULLUP_ENABLE,          // Enable pull-up
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,     // Disable pull-down
+        .intr_type = GPIO_INTR_DISABLE             // Disable interrupts
+    };
+
+    gpio_config(&ioConfBurnerFault);
+
+    BaseType_t taskCreated = xTaskCreate(
+        loop,          // Function to implement the task
+        "loop_inputs", // Task name
+        2048,          // Stack size (in words, not bytes)
+        NULL,          // Parameters to the task function (none in this case)
+        5,             // Task priority (higher number = higher priority)
+        NULL           // Task handle (optional)
+    );
+
+    if (taskCreated == pdPASS)
+    {
+        ESP_LOGI(TAG, "Task created successfully!");
+    }
+    else
+    {
+        ESP_LOGE(TAG, "Failed to create task");
+    }
+}
+
+void loop(void *pvParameters)
+{
+    // This task will run in a loop
+    while (1)
+    {
+        ESP_LOGI(TAG, "Running task Input...");
+        vTaskDelay(1000 / portTICK_PERIOD_MS); // Delay for 1 second
+
+        if (gpio_get_level(uBurnerFaultPin) == 1)
+        {
+            sBurnerErrorState = FAULT;
+        }
+        else
+        {
+            sBurnerErrorState = NO_ERROR;
+        }
+    }
+}
+
+float getChamberTemperature(void)
+{
+    return 42.42;
+}
+float getOutdoorTemperature(void)
+{
+    return 42.42;
+}
+float getInletFlowTemperature(void)
+{
+    return 42.42;
+}
+float getReturnFlowTemperature(void)
+{
+    return 42.42;
+}
+eBurnerErrorState getBurnerError(void)
+{
+    return sBurnerErrorState;
+}