implement Outputs

main/outputs.c

@@ -0,0 +1,73 @@
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "driver/gpio.h"
+#include "esp_log.h"
+
+#include "outputs.h"
+
+const uint8_t uCirculationPumpGpioPin = 27U;
+const uint8_t uBurnerGpioPin = 14U;
+
+static eOutput sCirculationPumpState;
+static eOutput sBurnerState;
+
+void initOutputs(void)
+{
+    gpio_config_t ioConfCirculationPump = {
+        .pin_bit_mask = (1ULL << uCirculationPumpGpioPin), // Pin mask
+        .mode = GPIO_MODE_OUTPUT,                          // Set as output
+        .pull_up_en = GPIO_PULLUP_DISABLE,                 // Disable pull-up
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,             // Disable pull-down
+        .intr_type = GPIO_INTR_DISABLE                     // Disable interrupts
+    };
+
+    gpio_config_t ioConfBurner = {
+        .pin_bit_mask = (1ULL << uBurnerGpioPin), // Pin mask
+        .mode = GPIO_MODE_OUTPUT,                 // Set as output
+        .pull_up_en = GPIO_PULLUP_DISABLE,        // Disable pull-up
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,    // Disable pull-down
+        .intr_type = GPIO_INTR_DISABLE            // Disable interrupts
+    };
+    gpio_config(&ioConfCirculationPump);
+    gpio_config(&ioConfBurner);
+}
+
+eOutput getCirculationPumpState(void)
+{
+    return sCirculationPumpState;
+}
+
+void setCirculationPumpState(eOutput in)
+{
+    sCirculationPumpState = in;
+    switch (sCirculationPumpState)
+    {
+    case ENABLED:
+        gpio_set_level(uCirculationPumpGpioPin, 1U); // Switch on Circulation Pump
+        break;
+    case DISABLED:
+        gpio_set_level(uCirculationPumpGpioPin, 0U); // Switch off Circulation Pump
+    default:
+        break;
+    }
+}
+
+eOutput getBurnerState(void)
+{
+return sBurnerState;
+}
+
+void setBurnerState(eOutput in)
+{
+    sBurnerState = in;
+    switch (sBurnerState)
+    {
+    case ENABLED:
+        gpio_set_level(uBurnerGpioPin, 0U); // Switch on Burner
+        break;
+    case DISABLED:
+        gpio_set_level(uBurnerGpioPin, 1U); // Switch off Burner
+    default:
+        break;
+    }
+}