Use mcci-catena/arduino-lmic as the base library

src/lmic/lorabase_as923.h

@@ -0,0 +1,96 @@
+/*
+* Copyright (c) 2014-2016 IBM Corporation.
+* All rights reserved.
+*
+* Copyright (c) 2017 MCCI Corporation
+* All rights reserved.
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions are met:
+*  * Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*  * Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*  * Neither the name of the <organization> nor the
+*    names of its contributors may be used to endorse or promote products
+*    derived from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef _lorabase_as923_h_
+#define _lorabase_as923_h_
+
+#ifndef _LMIC_CONFIG_PRECONDITIONS_H_
+# include "lmic_config_preconditions.h"
+#endif
+
+/****************************************************************************\
+|
+| Basic definitions for AS923 (always in scope)
+|
+\****************************************************************************/
+
+enum _dr_as923_t {
+        AS923_DR_SF12 = 0,
+        AS923_DR_SF11,
+        AS923_DR_SF10,
+        AS923_DR_SF9,
+        AS923_DR_SF8,
+        AS923_DR_SF7,
+        AS923_DR_SF7B,
+        AS923_DR_FSK,
+        AS923_DR_NONE
+};
+
+// Bands:
+//  g1 :   1%  16dBm
+//                 freq                band     datarates
+enum {
+        AS923_F1    = 923200000,      // g1   SF7-12
+        AS923_F2    = 923400000,      // g1   SF7-12
+        AS923_FDOWN = 923200000,      //      (RX2 freq, DR2)
+        AS923_FBCN  = 923400000,      //      default BCN, DR3
+        AS923_FPING = 923400000,      //      default ping, DR3
+};
+enum {
+        AS923_FREQ_MIN = 915000000,
+        AS923_FREQ_MAX = 928000000
+};
+enum {
+        AS923_TX_EIRP_MAX_DBM = 16      // 16 dBm
+};
+enum { DR_PAGE_AS923 = 0x10 * (LMIC_REGION_as923 - 1) };
+
+enum { AS923_LMIC_REGION_EIRP = 1 };         // region uses EIRP
+
+enum { AS923JP_LBT_US = 5000 };         // microseconds of LBT time -- 5000 ==>
+					// 5 ms. We use us rather than ms for
+					// future 128us support, and just for
+					// backward compatibility -- there
+					// is code that uses the _US constant,
+					// and it's awkward to break it.
+
+enum { AS923JP_LBT_DB_MAX = -80 };      // maximum channel strength in dB; if TX
+					// we measure more than this, we don't tx.
+
+// AS923 v1.1, all channels face a 1% duty cycle. So this will have to change
+// in the future via a config. But this code base needs major changes for
+// v1.1 in any case.
+enum { AS923_V102_TX_CAP = 100 };		// v1.0.2 allows 100%
+
+#ifndef AS923_TX_CAP
+# define AS923_TX_CAP	AS923_V102_TX_CAP
+#endif
+
+#endif /* _lorabase_as923_h_ */