Use mcci-catena/arduino-lmic as the base library

src/lmic/lorabase_eu868.h

@@ -0,0 +1,92 @@
+/*
+* Copyright (c) 2014-2016 IBM Corporation.
+* All rights reserved.
+*
+* Copyright (c) 2017 MCCI Corporation
+* All rights reserved.
+*
+*  Redistribution and use in source and binary forms, with or without
+*  modification, are permitted provided that the following conditions are met:
+*  * Redistributions of source code must retain the above copyright
+*    notice, this list of conditions and the following disclaimer.
+*  * Redistributions in binary form must reproduce the above copyright
+*    notice, this list of conditions and the following disclaimer in the
+*    documentation and/or other materials provided with the distribution.
+*  * Neither the name of the <organization> nor the
+*    names of its contributors may be used to endorse or promote products
+*    derived from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
+* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef _lorabase_eu868_h_
+#define _lorabase_eu868_h_
+
+#ifndef _LMIC_CONFIG_PRECONDITIONS_H_
+# include "lmic_config_preconditions.h"
+#endif
+
+/****************************************************************************\
+|
+| Basic definitions for EU868 (always in scope)
+|
+\****************************************************************************/
+
+//
+// Default frequency plan for EU 868MHz ISM band
+// data rates
+// this is a little confusing: the integer values of these constants are the
+// DataRates from the LoRaWAN Regional Parmaeter spec. The names are just
+// convenient indications, so we can use them in the rare case that we need to
+// choose a DataRate by SF and configuration, not by DR code.
+
+enum _dr_eu868_t {
+        EU868_DR_SF12 = 0,
+        EU868_DR_SF11,
+        EU868_DR_SF10,
+        EU868_DR_SF9,
+        EU868_DR_SF8,
+        EU868_DR_SF7,
+        EU868_DR_SF7B,
+        EU868_DR_FSK,
+        EU868_DR_NONE
+};
+
+// Bands:
+//  g1 :   1%  14dBm
+//  g2 : 0.1%  14dBm
+//  g3 :  10%  27dBm
+//                 freq             band     datarates
+enum {
+        EU868_F1 = 868100000,      // g1   SF7-12
+        EU868_F2 = 868300000,      // g1   SF7-12 FSK SF7/250
+        EU868_F3 = 868500000,      // g1   SF7-12
+        EU868_F4 = 868850000,      // g2   SF7-12
+        EU868_F5 = 869050000,      // g2   SF7-12
+        EU868_F6 = 869525000,      // g3   SF7-12
+        EU868_J4 = 864100000,      // g2   SF7-12  used during join
+        EU868_J5 = 864300000,      // g2   SF7-12   ditto
+        EU868_J6 = 864500000,      // g2   SF7-12   ditto
+};
+enum {
+        EU868_FREQ_MIN = 863000000,
+        EU868_FREQ_MAX = 870000000
+};
+enum {
+        EU868_TX_EIRP_MAX_DBM = 16      // 16 dBm EIRP. So subtract 3 dBm for a 3 dBi antenna.
+};
+
+enum { EU868_LMIC_REGION_EIRP = 1 };         // region uses EIRP
+
+enum { DR_PAGE_EU868 = 0x10 * (LMIC_REGION_eu868 - 1) };
+
+#endif /* _lorabase_eu868_h_ */