Configuration of UART

.vscode/c_cpp_properties.json

@@ -16,7 +16,9 @@
                 "${IDF_PATH}/components/soc/include",
                 "${IDF_PATH}/components/soc/esp32/include",
                 "${IDF_PATH}/components/tcpip_adapter/include",
+                "${workspaceRoot}/examples/provisioning/build/include",
                 "${workspaceRoot}/examples/hello_world/build/include",
+                "${workspaceRoot}/examples/send_recv/build/include",
                 "${workspaceRoot}/include",
                 "${workspaceRoot}/src"
         ],

.vscode/settings.json

@@ -3,6 +3,7 @@
         "provisioning.h": "c",
         "config.h": "c",
         "sdkconfig.h": "c",
-        "oslmic.h": "c"
+        "oslmic.h": "c",
+        "hal_esp32.h": "c"
     }
 }

Kconfig

@@ -88,21 +88,6 @@ config TTN_PROVISION_UART_NONE
     bool "None"
 endchoice
 
-choice TTN_PROVISION_UART_INIT
-    prompt "Initialize UART"
-    default TTN_PROVISION_UART_INIT_NO
-    depends on !TTN_PROVISION_UART_NONE
-    help
-        Select whether to initialize the UART, i.e. set the baud rate, the RX and TX
-        pins. If the UART is shared with other features (e.g. the console), it
-        should not be initialized. 
-
-config TTN_PROVISION_UART_INIT_NO
-    bool "No"
-config TTN_PROVISION_UART_INIT_YES
-    bool "Yes"
-endchoice
-
 choice TTN_PROVISION_UART_NUM
     prompt "UART peripheral for provisioning (0-1)"
     depends on TTN_PROVISION_UART_CUSTOM
@@ -114,6 +99,21 @@ config TTN_PROVISION_UART_CUSTOM_NUM_1
     bool "UART1"
 endchoice
 
+choice TTN_PROVISION_UART_CONFIG
+    prompt "Configure UART settings"
+    default TTN_PROVISION_UART_CONFIG_NO
+    depends on TTN_PROVISION_UART_CUSTOM
+    help
+        Select whether to configure the UART, i.e. set the baud rate, the RX and TX
+        pins. If the UART is shared with other features (e.g. the console), it
+        should not be configured. 
+
+config TTN_PROVISION_UART_CONFIG_NO
+    bool "No"
+config TTN_PROVISION_UART_CONFIG_YES
+    bool "Yes"
+endchoice
+
 config TTN_PROVISION_UART_NUM
     int
     default 0 if TTN_PROVISION_UART_DEFAULT || TTN_PROVISION_UART_NONE
@@ -122,21 +122,21 @@ config TTN_PROVISION_UART_NUM
 
 config TTN_PROVISION_UART_TX_GPIO
     int "Provisioning UART TX on GPIO#"
-    depends on TTN_PROVISION_UART_CUSTOM && TTN_PROVISION_UART_INIT_YES
+    depends on TTN_PROVISION_UART_CONFIG_YES
     range 0 33
-    default 19
+    default 1
 
 config TTN_PROVISION_UART_RX_GPIO
     int "Provisioning UART RX on GPIO#"
-    depends on TTN_PROVISION_UART_CUSTOM && TTN_PROVISION_UART_INIT_YES
+    depends on TTN_PROVISION_UART_CONFIG_YES
     range 0 39
-    default 21
+    default 3
 
 config TTN_PROVISION_UART_BAUDRATE
     int "Provisioning UART baud rate"
-    depends on TTN_PROVISION_UART_CUSTOM && TTN_PROVISION_UART_INIT_YES
-    default 115200
+    depends on TTN_PROVISION_UART_CONFIG_YES
     range 1200 4000000
+    default 115200
 
 
 endmenu

src/provisioning.c

@@ -53,8 +53,8 @@ static bool have_keys = false;
 static bool quit_task = false;
 
 
-#if defined(CONFIG_TTN_PROVISION_UART_INIT_YES)
-static void provisioning_init_uart();
+#if defined(CONFIG_TTN_PROVISION_UART_CONFIG_YES)
+static void provisioning_config_uart();
 #endif
 
 
@@ -88,8 +88,8 @@ void os_getDevKey (u1_t* buf)
 
 void provisioning_start_task()
 {
-#if defined(CONFIG_TTN_PROVISION_UART_INIT_YES)
-    provisioning_init_uart();
+#if defined(CONFIG_TTN_PROVISION_UART_CONFIG_YES)
+    provisioning_config_uart();
 #endif
 
     esp_err_t err = uart_driver_install(UART_NUM, 2048, 2048, 20, &uart_queue, 0);
@@ -244,11 +244,24 @@ void provisioning_process_line()
     uart_write_bytes(UART_NUM, is_ok ? "OK\r\n" : "ERROR\r\n", is_ok ? 4 : 7);
 }
 
-#if defined(CONFIG_TTN_PROVISION_UART_INIT_YES)
+#if defined(CONFIG_TTN_PROVISION_UART_CONFIG_YES)
 
-void provisioning_init_uart()
+void provisioning_config_uart()
 {
+    esp_err_t err;
 
+    uart_config_t uart_config = {
+        .baud_rate = CONFIG_TTN_PROVISION_UART_BAUDRATE,
+        .data_bits = UART_DATA_8_BITS,
+        .parity = UART_PARITY_DISABLE,
+        .stop_bits = UART_STOP_BITS_1,
+        .flow_ctrl = UART_HW_FLOWCTRL_DISABLE
+    };
+    err = uart_param_config(UART_NUM, &uart_config);
+    ESP_ERROR_CHECK(err);
+
+    err = uart_set_pin(UART_NUM, CONFIG_TTN_PROVISION_UART_TX_GPIO, CONFIG_TTN_PROVISION_UART_RX_GPIO, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
+    ESP_ERROR_CHECK(err);
 }
 
 #endif