Update page 'Software (en)'

Software-%28en%29.md

@@ -0,0 +1,84 @@
+After the hardware is fully assembled, the software can be installed.
+The recommended method for this is the installation via build-script. It's possible to run the script with and without Internet connection. To get the most up-to-date version of all software components, the installation with Internet connection is recommended!
+
+The script downloads and installs all required programs and libraries. Furthermore, the real-time clock as well as the auto-start of the software are set up on request.
+
+## online build-script
+1. Set up a new raspbian lite image.
+2. Install the following programs:     
+`sudo apt-get install usbmount cmake imagemagick fbi i2c-tools gpac`     
+3. Now download the ActionPi Software and unzip it.    
+`cd ~/Downloads/`      
+`git clone https://github.com/Seil0/ActionPi.git`     
+4. Execute the build script and the ActionPi software and all needed libraries will be installed.   
+`cd ActionPi/`    
+`./build.sh`  
+
+## offline build-script
+1. Set up a new raspbian lite image.
+2. Install the following programs, either with the Internet connection described above or via the corresponding packages:
+* usbmount
+* cmake
+* imagemagick
+* fbi
+* i2c-tools
+* gpac        
+3. Copy the [ActionPi_install_offline.zip](https://github.com/Seil0/ActionPi/releases/download/1.02/ActionPi_install_offline.zip) file into ` ~/Downloads/` and unzip it.   
+`cd ~/Downloads/`        
+`unzip ActionPi_install_offline.zip`
+4. Execute the build script and the ActionPi software and all needed libraries will be installed.    
+`cd ActionPi_install_offline/`    
+`./build_offline.sh`  
+
+## manuale Installation
+The manual installation is only recommended for advanced users!
+
+1. Set up a new raspbian lite image.
+2. Install the following program:      
+`sudo apt-get install usbmount cmake imagemagick fbi i2c-tools gpac`
+3. Install the raspicam c ++ library.
+```
+cd ~/Downloads/
+wget -O raspicam_c++-lib.zip https://sourceforge.net/projects/raspicam/files/raspicam-0.1.3.zip/download#
+unzip raspicam_c++-lib.zip
+cd raspicam-0.1.3/
+cmake install
+mkdir build
+cd build/
+cmake ..
+sudo make install
+sudo ldconfig
+```
+4. Install the bcm2835 library.
+```
+cd ~/Downloads/
+wget -O bcm2835-1.50.tar.gz http://www.airspayce.com/mikem/bcm2835/bcm2835-1.50.tar.gz
+tar zxvf bcm2835-1.50.tar.gz
+cd bcm2835-1.50/
+./configure
+make
+sudo make check
+sudo make install
+```
+5. Install the ActionPi software.
+```
+cd ~/Downloads/
+git clone https://github.com/Seil0/ActionPi.git
+cd ActionPi/
+g++ -Wall ActionPi.cpp -oActionPi -l raspicam -l bcm2835 -std=c++0x
+mkdir ~/ActionPi
+mv -i ActionPi ~/ActionPi/ActionPi
+cd ~/ActionPi/
+chmod +x ActionPi
+```
+6. (Optional) Start the ActionPi software automatically on boot up.      
+`sudo echo "sudo ~/ActionPi./ActionPi" > /etc/rc.local`
+7. (Optional) Add i2c configuration for the real-time clock.       
+`sudo i2cdetect -y 1; sudo modprobe rtc-ds1307; sudo echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device`
+8. (Optional) Deactivate dhcpcd, speeds up the boot process, disables DHCP! (Not recommended!)    
+```
+sudo service dhcpcd stop
+sudo systemctl disable dhcpcd
+```
+9. Reboot the system (recommended).     
+`sudo reboot`