silence error due to missing hardware

- Change to new One Wire Sensors that are no fakes
- Increase chamber temperature

Reviewed-on: #21
Co-authored-by: localhorst <localhorst@mosad.xyz>
Co-committed-by: localhorst <localhorst@mosad.xyz>

main/control.c

@@ -12,7 +12,7 @@
 
 #define RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY 30.0
 #define RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT 25.0
-#define CHAMPER_TEMPERATURE_TARGET 70.0
+#define CHAMPER_TEMPERATURE_TARGET 80.0
 #define BURNER_FAULT_DETECTION_THRESHOLD (60U * 3U) // Detect burner fault if after 3 minutes no burner start detected
 
 static const char *TAG = "smart-oil-heater-control-system-control";
@@ -59,13 +59,18 @@ void taskControl(void *pvParameters)
     bool bBurnerFaultDetected = false;
     int64_t i64BurnerEnableTimestamp = esp_timer_get_time();
 
+    time_t now;
+
     while (1)
     {
+        // Get the current time
+        time(&now);
+        ESP_LOGW(TAG, "Control loop time: %lli", now);
         vTaskDelay(PERIODIC_INTERVAL * 1000U / portTICK_PERIOD_MS);
 
         if (getSafetyState() != SAFETY_NO_ERROR)
         {
-            ESP_LOGW(TAG, "Control not possible due to safety fault!");
+            //ESP_LOGW(TAG, "Control not possible due to safety fault!");
             sControlState = CONTROL_FAULT_SAFETY;
             if (bHeatingInAction == true)
             {
@@ -98,7 +103,7 @@ void taskControl(void *pvParameters)
 
         if (bHeatingInAction == true)
         {
-            if (getChamberTemperature().fCurrentValue >= currentControlEntry.fChamberTemperature)
+            if ((getChamberTemperature().fCurrentValue >= currentControlEntry.fChamberTemperature) || (getChamberTemperature().predict60s.fValue >= currentControlEntry.fChamberTemperature))
             {
                 ESP_LOGI(TAG, "Chamber Target Temperature reached: Disable burner");
                 bHeatingInAction = false;

main/inputs.c

@@ -16,10 +16,10 @@ static const char *TAG = "smart-oil-heater-control-system-inputs";
 const uint8_t uBurnerFaultPin = 19U;
 const uint8_t uDS18B20Pin = 4U;
 
-const onewire_addr_t uChamperTempSensorAddr = 0x3e0000001754be28;
-const onewire_addr_t uOutdoorTempSensorAddr = 0x880000001648e328;
-const onewire_addr_t uInletFlowTempSensorAddr = 0xe59cdef51e64ff28;
-const onewire_addr_t uReturnFlowTempSensorAddr = 0xa7a8e1531f64ff28;
+const onewire_addr_t uChamperTempSensorAddr = 0xd00000108cd01d28;
+const onewire_addr_t uOutdoorTempSensorAddr = 0x78000000c6c2f728;
+const onewire_addr_t uInletFlowTempSensorAddr = 0x410000108b8c0628;
+const onewire_addr_t uReturnFlowTempSensorAddr = 0x90000108cc77c28;
 
 onewire_addr_t uOneWireAddresses[MAX_DN18B20_SENSORS];
 float fDS18B20Temps[MAX_DN18B20_SENSORS];
@@ -189,12 +189,12 @@ void taskInput(void *pvParameters)
 
             if (ds18x20_scan_devices(uDS18B20Pin, uOneWireAddresses, MAX_DN18B20_SENSORS, &sSensorCount) != ESP_OK)
             {
-                ESP_LOGE(TAG, "1-Wire device scan error!");
+               // ESP_LOGE(TAG, "1-Wire device scan error!");
             }
 
             if (!sSensorCount)
             {
-                ESP_LOGW(TAG, "No 1-Wire devices detected!");
+               // ESP_LOGW(TAG, "No 1-Wire devices detected!");
             }
             else
             {
@@ -203,14 +203,14 @@ void taskInput(void *pvParameters)
                 if (sSensorCount > MAX_DN18B20_SENSORS)
                 {
                     sSensorCount = MAX_DN18B20_SENSORS;
-                    ESP_LOGW(TAG, "More 1-Wire devices found than expected!");
+                   // ESP_LOGW(TAG, "More 1-Wire devices found than expected!");
                 }
 
                 for (size_t iReadLoop = 0; iReadLoop < ONE_WIRE_LOOPS; iReadLoop++)
                 {
                     if (ds18x20_measure_and_read_multi(uDS18B20Pin, uOneWireAddresses, sSensorCount, fDS18B20Temps) != ESP_OK)
                     {
-                        ESP_LOGE(TAG, "1-Wire devices read error");
+                      //  ESP_LOGE(TAG, "1-Wire devices read error");
                         vTaskDelay(PERIODIC_INTERVAL * 100U / portTICK_PERIOD_MS); // Wait 100ms if bus error occurred
                     }
                     else

main/safety.c

@@ -85,7 +85,7 @@ void checkSensorSanity(void)
 
         if (sCurrentMeasurement.state == MEASUREMENT_FAULT)
         {
-            ESP_LOGE(TAG, "%s Sensor not found!", sanityChecks[i].name);
+            //ESP_LOGE(TAG, "%s Sensor not found!", sanityChecks[i].name);
             sanityChecks[i].state = SENSOR_NOT_FOUND;
             sSafetyState = SAFETY_SENSOR_ERROR;
         }