mirror of
https://github.com/manuelbl/ttn-esp32.git
synced 2025-06-14 20:14:27 +02:00
95 lines
2.7 KiB
C++
95 lines
2.7 KiB
C++
/*******************************************************************************
|
|
*
|
|
* ttn-esp32 - The Things Network device library for ESP-IDF / SX127x
|
|
*
|
|
* Copyright (c) 2018 Manuel Bleichenbacher
|
|
*
|
|
* Licensed under MIT License
|
|
* https://opensource.org/licenses/MIT
|
|
*
|
|
* Sample program showing how to provision the keys via the console.
|
|
*******************************************************************************/
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_event.h"
|
|
#include "nvs_flash.h"
|
|
|
|
#include "TheThingsNetwork.h"
|
|
|
|
|
|
// NOTE:
|
|
// The LoRaWAN frequency and the radio chip must be configured by running 'make menuconfig'.
|
|
// Go to Components / The Things Network, select the appropriate values and save.
|
|
|
|
|
|
// Pins and other resources
|
|
#define TTN_SPI_HOST SPI2_HOST
|
|
#define TTN_SPI_DMA_CHAN SPI_DMA_DISABLED
|
|
#define TTN_PIN_SPI_SCLK 5
|
|
#define TTN_PIN_SPI_MOSI 27
|
|
#define TTN_PIN_SPI_MISO 19
|
|
#define TTN_PIN_NSS 18
|
|
#define TTN_PIN_RXTX TTN_NOT_CONNECTED
|
|
#define TTN_PIN_RST 14
|
|
#define TTN_PIN_DIO0 26
|
|
#define TTN_PIN_DIO1 33
|
|
|
|
static TheThingsNetwork ttn;
|
|
|
|
const unsigned TX_INTERVAL = 30;
|
|
static uint8_t msgData[] = "Hello, world";
|
|
|
|
|
|
void sendMessages(void* pvParameter)
|
|
{
|
|
while (1) {
|
|
printf("Sending message...\n");
|
|
TTNResponseCode res = ttn.transmitMessage(msgData, sizeof(msgData) - 1);
|
|
printf(res == kTTNSuccessfulTransmission ? "Message sent.\n" : "Transmission failed.\n");
|
|
|
|
vTaskDelay(TX_INTERVAL * pdMS_TO_TICKS(1000));
|
|
}
|
|
}
|
|
|
|
extern "C" void app_main(void)
|
|
{
|
|
esp_err_t err;
|
|
// Initialize the GPIO ISR handler service
|
|
err = gpio_install_isr_service(ESP_INTR_FLAG_IRAM);
|
|
ESP_ERROR_CHECK(err);
|
|
|
|
// Initialize the NVS (non-volatile storage) for saving and restoring the keys
|
|
err = nvs_flash_init();
|
|
ESP_ERROR_CHECK(err);
|
|
|
|
// Initialize SPI bus
|
|
spi_bus_config_t spi_bus_config;
|
|
spi_bus_config.miso_io_num = TTN_PIN_SPI_MISO;
|
|
spi_bus_config.mosi_io_num = TTN_PIN_SPI_MOSI;
|
|
spi_bus_config.sclk_io_num = TTN_PIN_SPI_SCLK;
|
|
spi_bus_config.quadwp_io_num = -1;
|
|
spi_bus_config.quadhd_io_num = -1;
|
|
spi_bus_config.max_transfer_sz = 0;
|
|
err = spi_bus_initialize(TTN_SPI_HOST, &spi_bus_config, TTN_SPI_DMA_CHAN);
|
|
ESP_ERROR_CHECK(err);
|
|
|
|
// Configure the SX127x pins
|
|
ttn.configurePins(TTN_SPI_HOST, TTN_PIN_NSS, TTN_PIN_RXTX, TTN_PIN_RST, TTN_PIN_DIO0, TTN_PIN_DIO1);
|
|
|
|
ttn.startProvisioningTask();
|
|
|
|
ttn.waitForProvisioning();
|
|
|
|
printf("Joining...\n");
|
|
if (ttn.join())
|
|
{
|
|
printf("Joined.\n");
|
|
xTaskCreate(sendMessages, "send_messages", 1024 * 4, (void* )0, 3, nullptr);
|
|
}
|
|
else
|
|
{
|
|
printf("Join failed. Goodbye\n");
|
|
}
|
|
}
|