fn check app version

sdkconfig.old

@@ -2,6 +2,7 @@
 # Automatically generated file. DO NOT EDIT.
 # Espressif IoT Development Framework (ESP-IDF) Project Configuration
 #
+CONFIG_IDF_CMAKE=y
 CONFIG_IDF_TARGET_ARCH_XTENSA=y
 CONFIG_IDF_TARGET="esp32"
 CONFIG_IDF_TARGET_ESP32=y
@@ -11,8 +12,6 @@ CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000
 # SDK tool configuration
 #
 CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-"
-CONFIG_SDK_PYTHON="python"
-CONFIG_SDK_MAKE_WARN_UNDEFINED_VARIABLES=y
 # CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set
 # end of SDK tool configuration
 
@@ -67,23 +66,22 @@ CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0
 #
 # Security features
 #
-# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set
+CONFIG_SECURE_SIGNED_ON_UPDATE=y
+CONFIG_SECURE_SIGNED_APPS=y
+CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT=y
+CONFIG_SECURE_SIGNED_APPS_ECDSA_SCHEME=y
+# CONFIG_SECURE_SIGNED_ON_BOOT_NO_SECURE_BOOT is not set
+CONFIG_SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT=y
 # CONFIG_SECURE_BOOT is not set
+CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES=y
+CONFIG_SECURE_BOOT_SIGNING_KEY="secure_boot_signing_key.pem"
 # CONFIG_SECURE_FLASH_ENC_ENABLED is not set
 # end of Security features
 
 #
 # Serial flasher config
 #
-CONFIG_ESPTOOLPY_PORT="/dev/ttyUSB0"
-CONFIG_ESPTOOLPY_BAUD_115200B=y
-# CONFIG_ESPTOOLPY_BAUD_230400B is not set
-# CONFIG_ESPTOOLPY_BAUD_921600B is not set
-# CONFIG_ESPTOOLPY_BAUD_2MB is not set
-# CONFIG_ESPTOOLPY_BAUD_OTHER is not set
 CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200
-CONFIG_ESPTOOLPY_BAUD=115200
-CONFIG_ESPTOOLPY_COMPRESSED=y
 # CONFIG_ESPTOOLPY_NO_STUB is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QIO is not set
 # CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set
@@ -120,6 +118,18 @@ CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200
 CONFIG_ESPTOOLPY_MONITOR_BAUD=115200
 # end of Serial flasher config
 
+#
+# Partition Table
+#
+# CONFIG_PARTITION_TABLE_SINGLE_APP is not set
+# CONFIG_PARTITION_TABLE_TWO_OTA is not set
+CONFIG_PARTITION_TABLE_CUSTOM=y
+CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
+CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"
+CONFIG_PARTITION_TABLE_OFFSET=0x8000
+CONFIG_PARTITION_TABLE_MD5=y
+# end of Partition Table
+
 #
 # Example Configuration
 #
@@ -138,30 +148,18 @@ CONFIG_MESH_PS_NETWORK_DUTY_APPLIED_ENTIRE=y
 CONFIG_MESH_PS_NWK_DUTY_RULE=0
 CONFIG_MESH_MAX_LAYER=6
 CONFIG_MESH_CHANNEL=13
-CONFIG_MESH_ROUTER_SSID="nicht verbunden"
-CONFIG_MESH_ROUTER_PASSWD="flamingo"
+CONFIG_MESH_ROUTER_SSID="labNet"
+CONFIG_MESH_ROUTER_PASSWD="12345678"
 # CONFIG_WIFI_AUTH_OPEN is not set
 # CONFIG_WIFI_AUTH_WPA_PSK is not set
 CONFIG_WIFI_AUTH_WPA2_PSK=y
 # CONFIG_WIFI_AUTH_WPA_WPA2_PSK is not set
 CONFIG_MESH_AP_AUTHMODE=3
-CONFIG_MESH_AP_PASSWD="MAP_PASSWD"
+CONFIG_MESH_AP_PASSWD="qaws1234"
 CONFIG_MESH_AP_CONNECTIONS=6
 CONFIG_MESH_ROUTE_TABLE_SIZE=50
 # end of Example Configuration
 
-#
-# Partition Table
-#
-CONFIG_PARTITION_TABLE_SINGLE_APP=y
-# CONFIG_PARTITION_TABLE_TWO_OTA is not set
-# CONFIG_PARTITION_TABLE_CUSTOM is not set
-CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
-CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv"
-CONFIG_PARTITION_TABLE_OFFSET=0x8000
-CONFIG_PARTITION_TABLE_MD5=y
-# end of Partition Table
-
 #
 # Compiler options
 #
@@ -338,36 +336,6 @@ CONFIG_ESP32_XTAL_FREQ=40
 CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5
 # end of ESP32-specific
 
-#
-# Memory protection
-#
-CONFIG_ESP32S2_MEMPROT_FEATURE=y
-CONFIG_ESP32S2_MEMPROT_FEATURE_LOCK=y
-# end of Memory protection
-
-#
-# Cache config
-#
-# end of Cache config
-
-CONFIG_ESP32S2_TRACEMEM_RESERVE_DRAM=0x0
-CONFIG_ESP32S2_ULP_COPROC_RESERVE_MEM=0
-CONFIG_ESP32S2_DEBUG_OCDAWARE=y
-CONFIG_ESP32S2_BROWNOUT_DET=y
-CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP=y
-
-#
-# Cache config
-#
-# end of Cache config
-
-CONFIG_ESP32S3_TRACEMEM_RESERVE_DRAM=0x0
-CONFIG_ESP_MAC_ADDR_UNIVERSE_BT_OFFSET=2
-CONFIG_ESP32S3_ULP_COPROC_RESERVE_MEM=0
-CONFIG_ESP32S3_DEBUG_OCDAWARE=y
-CONFIG_ESP32S3_BROWNOUT_DET=y
-CONFIG_ESP32S3_ALLOW_RTC_FAST_MEM_AS_HEAP=y
-
 #
 # ADC-Calibration
 #
@@ -404,6 +372,7 @@ CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y
 CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y
 CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y
 CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y
+CONFIG_ESP_MAC_ADDR_UNIVERSE_BT_OFFSET=2
 CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y
 # end of Common ESP-related
 
@@ -1054,6 +1023,11 @@ CONFIG_SPIFFS_USE_MTIME=y
 CONFIG_WS_BUFFER_SIZE=1024
 # end of TCP Transport
 
+#
+# TinyUSB
+#
+# end of TinyUSB
+
 #
 # Unity unit testing library
 #