implement config

Reviewed-on: #25
Co-authored-by: localhorst <localhorst@mosad.xyz>
Co-committed-by: localhorst <localhorst@mosad.xyz>

README.md

@@ -19,7 +19,11 @@ Sntp <|-- Metrics
 
     class Inputs{
         +initInputs()
+        -initMeasurement()
+        -updateAverage()
+        -updatePrediction()
         -taskInput()
+        -linearRegressionPredict()
         +getChamberTemperature()
         +getOutdoorTemperature()
         +getInletFlowTemperature()
@@ -38,7 +42,11 @@ Sntp <|-- Metrics
     }
 
     class Control{
+        initControl()
         +taskControl()
+        +getControlCurrentWeekday()
+        -findControlCurrentTemperatureEntry()
+        +getControlCurrentTemperatureEntry()
         -controlTable
         +getControlState()
     }
@@ -79,33 +87,41 @@ Sntp <|-- Metrics
 burner_fault_pending 1
 circulation_pump_enabled 1
 burner_enabled 0
-safety_contact_enabled 0
+safety_contact_enabled 1
-chamber_temperature 58.750000
+chamber_temperature 37.250000
-chamber_temperature_avg10 58.931252
+chamber_temperature_avg10 37.237499
-chamber_temperature_avg60 59.190475
+chamber_temperature_avg60 37.438541
-chamber_temperature_pred60 55.870998
+chamber_temperature_damped 42.185040
-inlet_flow_temperature 53.875000
+chamber_temperature_pred60 36.638443
-inlet_flow_temperature_avg10 53.900002
+inlet_flow_temperature 35.625000
-inlet_flow_temperature_avg60 53.994320
+inlet_flow_temperature_avg10 35.618752
-inlet_flow_temperature_pred60 52.848743
+inlet_flow_temperature_avg60 35.415627
-outdoor_temperature 18.000000
+inlet_flow_temperature_damped 39.431259
-outdoor_temperature_avg10 18.006250
+inlet_flow_temperature_pred60 36.078678
-outdoor_temperature_avg60 18.002840
+outdoor_temperature 14.687500
-outdoor_temperature_pred60 18.050785
+outdoor_temperature_avg10 14.662500
-return_flow_temperature 48.625000
+outdoor_temperature_avg60 14.646875
-return_flow_temperature_avg10 48.718750
+outdoor_temperature_damped 9.169084
-return_flow_temperature_avg60 48.846592
+outdoor_temperature_pred60 14.660233
-return_flow_temperature_pred60 47.383083
+return_flow_temperature 39.937500
+return_flow_temperature_avg10 40.087502
+return_flow_temperature_avg60 41.146873
+return_flow_temperature_damped 32.385151
+return_flow_temperature_pred60 37.311958
 chamber_temperature_state 0
 outdoor_temperature_state 0
 inlet_flow_temperature_state 0
 return_flow_temperature_state 0
 safety_state 0
 control_state 3
+control_current_weekday 5
+control_current_entry_time 17100
+control_current_entry_chamber_temperature 80.000000
+control_current_entry_return_flow_temperature 30.000000
 sntp_state 0
-system_unixtime 1735242392
+system_unixtime 1762012743
-uptime_seconds 40
+uptime_seconds 465229
-wifi_rssi -74
+wifi_rssi -72
 ```
 
 #### Status Encoding

main/Kconfig.projbuild

@@ -1,22 +1,391 @@
 menu "Smart Oil Heating Control System"
 
+    menu "WiFi Configuration"
         config SSID
-        string "SSID"
+            string "WiFi SSID"
             default "my WiFi SSID"
+            help
+                The SSID of the WiFi network to connect to.
+
         config WIFI_PASSWORD
-        string "WIFI_PASSWORD"
+            string "WiFi Password"
             default "my WIFI Password"
+            help
+                The password for the WiFi network.
+
         config STATIC_IP_ADDR
             string "Static IPv4 address"
             default "192.168.0.42"
+            help
+                Static IP address for the ESP32.
+
         config STATIC_IP_NETMASK
             string "Static IPv4 netmask"
             default "255.255.0.0"
+            help
+                Network mask for the static IP configuration.
+
         config STATIC_GATEWAY_IP_ADDR
             string "Static IPv4 gateway address"
             default "192.168.0.1"
+            help
+                Gateway IP address for network routing.
+
         config SNTP_SERVER_IP_ADDR
-        string "SNTP IPv4 server address"
+            string "SNTP server address"
             default "192.168.0.1"
+            help
+                NTP server address for time synchronization.
+    endmenu
+
+    menu "GPIO Configuration"
+        menu "Input GPIOs"
+            config GPIO_BURNER_FAULT
+                int "Burner fault input GPIO"
+                range 0 39
+                default 19
+                help
+                    GPIO pin connected to the burner fault signal.
+
+            config GPIO_DS18B20_ONEWIRE
+                int "DS18B20 1-Wire bus GPIO"
+                range 0 39
+                default 4
+                help
+                    GPIO pin for the 1-Wire bus (DS18B20 temperature sensors).
+        endmenu
+
+        menu "Output GPIOs"
+            config GPIO_CIRCULATION_PUMP
+                int "Circulation pump output GPIO"
+                range 0 39
+                default 27
+                help
+                    GPIO pin to control the circulation pump relay.
+
+            config GPIO_BURNER
+                int "Burner control output GPIO"
+                range 0 39
+                default 14
+                help
+                    GPIO pin to control the burner relay.
+
+            config GPIO_SAFETY_CONTACT
+                int "Safety contact output GPIO"
+                range 0 39
+                default 12
+                help
+                    GPIO pin for the safety contact relay (main power to burner).
+        endmenu
+    endmenu
+
+    menu "1-Wire Sensor Addresses"
+        config ONEWIRE_ADDR_CHAMBER_TEMP
+            hex "Chamber temperature sensor address"
+            default 0xd00000108cd01d28
+            help
+                64-bit 1-Wire address of the chamber temperature sensor.
+
+        config ONEWIRE_ADDR_OUTDOOR_TEMP
+            hex "Outdoor temperature sensor address"
+            default 0xd70000108a9b9128
+            help
+                64-bit 1-Wire address of the outdoor temperature sensor.
+
+        config ONEWIRE_ADDR_INLET_FLOW_TEMP
+            hex "Inlet flow temperature sensor address"
+            default 0x410000108b8c0628
+            help
+                64-bit 1-Wire address of the inlet flow temperature sensor.
+
+        config ONEWIRE_ADDR_RETURN_FLOW_TEMP
+            hex "Return flow temperature sensor address"
+            default 0x90000108cc77c28
+            help
+                64-bit 1-Wire address of the return flow temperature sensor.
+    endmenu
+
+    menu "Temperature Control Settings"
+        menu "Target Temperatures"
+            config TEMP_RETURN_FLOW_LOWER_LIMIT_DAY
+                int "Return flow lower limit (day) [°C x 10]"
+                range 150 500
+                default 300
+                help
+                    Minimum return flow temperature during day mode in 0.1°C units.
+                    Example: 300 = 30.0°C
+
+            config TEMP_RETURN_FLOW_LOWER_LIMIT_NIGHT
+                int "Return flow lower limit (night) [°C x 10]"
+                range 150 500
+                default 250
+                help
+                    Minimum return flow temperature during night mode in 0.1°C units.
+                    Example: 250 = 25.0°C
+
+            config TEMP_CHAMBER_TARGET
+                int "Chamber target temperature [°C x 10]"
+                range 500 950
+                default 800
+                help
+                    Maximum chamber temperature target in 0.1°C units.
+                    Example: 800 = 80.0°C
+
+            config TEMP_CHAMBER_THRESHOLD
+                int "Chamber temperature threshold [°C x 10]"
+                range 300 700
+                default 450
+                help
+                    Minimum chamber temperature to enable burner in 0.1°C units.
+                    Example: 450 = 45.0°C
+
+            config TEMP_CIRCULATION_PUMP_THRESHOLD
+                int "Circulation pump threshold [°C x 10]"
+                range 200 500
+                default 300
+                help
+                    Minimum chamber temperature to enable circulation pump in 0.1°C units.
+                    Example: 300 = 30.0°C
+        endmenu
+
+        menu "Summer Mode Settings"
+            config TEMP_SUMMER_MODE_HIGH
+                int "Summer mode activation threshold [°C x 10]"
+                range 150 300
+                default 200
+                help
+                    Outdoor temperature above which summer mode activates in 0.1°C units.
+                    Example: 200 = 20.0°C
+
+            config TEMP_SUMMER_MODE_LOW
+                int "Summer mode deactivation threshold [°C x 10]"
+                range 100 250
+                default 150
+                help
+                    Outdoor temperature below which summer mode deactivates in 0.1°C units.
+                    Example: 150 = 15.0°C
+        endmenu
+
+        config BURNER_FAULT_DETECTION_SECONDS
+            int "Burner fault detection timeout (seconds)"
+            range 60 600
+            default 240
+            help
+                Time in seconds to wait before checking for burner fault after enabling.
+    endmenu
+
+    menu "Sensor Limits"
+        menu "Chamber Temperature Limits"
+            config SENSOR_LIMIT_CHAMBER_MAX
+                int "Chamber sensor maximum [°C x 10]"
+                range 500 1200
+                default 950
+                help
+                    Maximum valid chamber temperature reading in 0.1°C units.
+
+            config SENSOR_LIMIT_CHAMBER_MIN
+                int "Chamber sensor minimum [°C x 10]"
+                range -400 100
+                default -100
+                help
+                    Minimum valid chamber temperature reading in 0.1°C units.
+        endmenu
+
+        menu "Outdoor Temperature Limits"
+            config SENSOR_LIMIT_OUTDOOR_MAX
+                int "Outdoor sensor maximum [°C x 10]"
+                range 300 600
+                default 450
+                help
+                    Maximum valid outdoor temperature reading in 0.1°C units.
+
+            config SENSOR_LIMIT_OUTDOOR_MIN
+                int "Outdoor sensor minimum [°C x 10]"
+                range -500 0
+                default -200
+                help
+                    Minimum valid outdoor temperature reading in 0.1°C units.
+        endmenu
+
+        menu "Inlet Flow Temperature Limits"
+            config SENSOR_LIMIT_INLET_MAX
+                int "Inlet flow sensor maximum [°C x 10]"
+                range 500 1200
+                default 950
+                help
+                    Maximum valid inlet flow temperature reading in 0.1°C units.
+
+            config SENSOR_LIMIT_INLET_MIN
+                int "Inlet flow sensor minimum [°C x 10]"
+                range -400 100
+                default -100
+                help
+                    Minimum valid inlet flow temperature reading in 0.1°C units.
+        endmenu
+
+        menu "Return Flow Temperature Limits"
+            config SENSOR_LIMIT_RETURN_MAX
+                int "Return flow sensor maximum [°C x 10]"
+                range 500 1200
+                default 950
+                help
+                    Maximum valid return flow temperature reading in 0.1°C units.
+
+            config SENSOR_LIMIT_RETURN_MIN
+                int "Return flow sensor minimum [°C x 10]"
+                range -400 100
+                default -100
+                help
+                    Minimum valid return flow temperature reading in 0.1°C units.
+        endmenu
+
+        config SENSOR_GRACE_PERIOD_MINUTES
+            int "Sensor unchanged grace period (minutes)"
+            range 1 120
+            default 30
+            help
+                Maximum time in minutes a sensor can report unchanged values
+                before being flagged as faulty.
+    endmenu
+
+    menu "Damping Factors"
+        config DAMPING_FACTOR_WARMER
+            int "Damping factor warmer [x 0.00001]"
+            range 1 100
+            default 1
+            help
+                Damping factor for rising temperatures in units of 0.00001.
+                Example: 1 = 0.00001 (0.001%)
+
+        config DAMPING_FACTOR_COLDER
+            int "Damping factor colder [x 0.00001]"
+            range 1 100
+            default 5
+            help
+                Damping factor for falling temperatures in units of 0.00001.
+                Example: 5 = 0.00005 (0.005%)
+    endmenu
+
+    menu "Heating Schedule"
+        menu "Weekday Schedule (Monday-Thursday)"
+            config SCHEDULE_WEEKDAY_DAY_START_HOUR
+                int "Day mode start hour"
+                range 0 23
+                default 4
+                help
+                    Hour when day mode starts on weekdays (24h format).
+
+            config SCHEDULE_WEEKDAY_DAY_START_MINUTE
+                int "Day mode start minute"
+                range 0 59
+                default 45
+                help
+                    Minute when day mode starts on weekdays.
+
+            config SCHEDULE_WEEKDAY_NIGHT_START_HOUR
+                int "Night mode start hour"
+                range 0 23
+                default 22
+                help
+                    Hour when night mode starts on weekdays (24h format).
+
+            config SCHEDULE_WEEKDAY_NIGHT_START_MINUTE
+                int "Night mode start minute"
+                range 0 59
+                default 0
+                help
+                    Minute when night mode starts on weekdays.
+        endmenu
+
+        menu "Friday Schedule"
+            config SCHEDULE_FRIDAY_DAY_START_HOUR
+                int "Day mode start hour"
+                range 0 23
+                default 4
+                help
+                    Hour when day mode starts on Friday (24h format).
+
+            config SCHEDULE_FRIDAY_DAY_START_MINUTE
+                int "Day mode start minute"
+                range 0 59
+                default 45
+                help
+                    Minute when day mode starts on Friday.
+
+            config SCHEDULE_FRIDAY_NIGHT_START_HOUR
+                int "Night mode start hour"
+                range 0 23
+                default 23
+                help
+                    Hour when night mode starts on Friday (24h format).
+
+            config SCHEDULE_FRIDAY_NIGHT_START_MINUTE
+                int "Night mode start minute"
+                range 0 59
+                default 0
+                help
+                    Minute when night mode starts on Friday.
+        endmenu
+
+        menu "Saturday Schedule"
+            config SCHEDULE_SATURDAY_DAY_START_HOUR
+                int "Day mode start hour"
+                range 0 23
+                default 6
+                help
+                    Hour when day mode starts on Saturday (24h format).
+
+            config SCHEDULE_SATURDAY_DAY_START_MINUTE
+                int "Day mode start minute"
+                range 0 59
+                default 45
+                help
+                    Minute when day mode starts on Saturday.
+
+            config SCHEDULE_SATURDAY_NIGHT_START_HOUR
+                int "Night mode start hour"
+                range 0 23
+                default 23
+                help
+                    Hour when night mode starts on Saturday (24h format).
+
+            config SCHEDULE_SATURDAY_NIGHT_START_MINUTE
+                int "Night mode start minute"
+                range 0 59
+                default 30
+                help
+                    Minute when night mode starts on Saturday.
+        endmenu
+
+        menu "Sunday Schedule"
+            config SCHEDULE_SUNDAY_DAY_START_HOUR
+                int "Day mode start hour"
+                range 0 23
+                default 6
+                help
+                    Hour when day mode starts on Sunday (24h format).
+
+            config SCHEDULE_SUNDAY_DAY_START_MINUTE
+                int "Day mode start minute"
+                range 0 59
+                default 45
+                help
+                    Minute when day mode starts on Sunday.
+
+            config SCHEDULE_SUNDAY_NIGHT_START_HOUR
+                int "Night mode start hour"
+                range 0 23
+                default 22
+                help
+                    Hour when night mode starts on Sunday (24h format).
+
+            config SCHEDULE_SUNDAY_NIGHT_START_MINUTE
+                int "Night mode start minute"
+                range 0 59
+                default 30
+                help
+                    Minute when night mode starts on Sunday.
+        endmenu
+    endmenu
 
 endmenu

main/control.c

@@ -1,41 +1,98 @@
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "esp_timer.h"
-#include "esp_log.h"
 #include "control.h"
-#include "outputs.h"
 #include "inputs.h"
+#include "outputs.h"
 #include "safety.h"
 #include "sntp.h"
 
-#define PERIODIC_INTERVAL 1U // run control loop every 1sec
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
 
-#define RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY 30.0
+#define PERIODIC_INTERVAL 1U // Run control loop every 1 second
-#define RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT 25.0
-#define CHAMPER_TEMPERATURE_TARGET 80.0
-#define BURNER_FAULT_DETECTION_THRESHOLD (60U * 3U) // Detect burner fault if after 3 minutes no burner start detected
 
 static const char *TAG = "smart-oil-heater-control-system-control";
-static eControlState sControlState = CONTROL_STARTING;
+static eControlState gControlState = CONTROL_STARTING;
-
+// Control table for daily schedules
-static sControlDay aControlTable[] = {
+static const sControlDay gControlTable[] = {
-    {MONDAY, 2U, {{{4, 45}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY, CHAMPER_TEMPERATURE_TARGET}, {{22, 0}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT, CHAMPER_TEMPERATURE_TARGET}}},
+    {MONDAY,
-    {TUESDAY, 2U, {{{4, 45}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY, CHAMPER_TEMPERATURE_TARGET}, {{22, 0}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT, CHAMPER_TEMPERATURE_TARGET}}},
+     2U,
-    {WEDNESDAY, 2U, {{{4, 45}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY, CHAMPER_TEMPERATURE_TARGET}, {{22, 0}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT, CHAMPER_TEMPERATURE_TARGET}}},
+     {{{CONFIG_SCHEDULE_WEEKDAY_DAY_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_DAY_START_MINUTE},
-    {THURSDAY, 2U, {{{4, 45}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY, CHAMPER_TEMPERATURE_TARGET}, {{22, 0}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT, CHAMPER_TEMPERATURE_TARGET}}},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY,
-    {FRIDAY, 2U, {{{4, 45}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY, CHAMPER_TEMPERATURE_TARGET}, {{23, 0}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT, CHAMPER_TEMPERATURE_TARGET}}},
+       CHAMBER_TEMPERATURE_TARGET},
-    {SATURDAY, 2U, {{{6, 45}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY, CHAMPER_TEMPERATURE_TARGET}, {{23, 30}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT, CHAMPER_TEMPERATURE_TARGET}}},
+      {{CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_MINUTE},
-    {SUNDAY, 2U, {{{6, 45}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY, CHAMPER_TEMPERATURE_TARGET}, {{22, 30}, RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT, CHAMPER_TEMPERATURE_TARGET}}},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT,
+       CHAMBER_TEMPERATURE_TARGET}}},
+    {TUESDAY,
+     2U,
+     {{{CONFIG_SCHEDULE_WEEKDAY_DAY_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_DAY_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY,
+       CHAMBER_TEMPERATURE_TARGET},
+      {{CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT,
+       CHAMBER_TEMPERATURE_TARGET}}},
+    {WEDNESDAY,
+     2U,
+     {{{CONFIG_SCHEDULE_WEEKDAY_DAY_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_DAY_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY,
+       CHAMBER_TEMPERATURE_TARGET},
+      {{CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT,
+       CHAMBER_TEMPERATURE_TARGET}}},
+    {THURSDAY,
+     2U,
+     {{{CONFIG_SCHEDULE_WEEKDAY_DAY_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_DAY_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY,
+       CHAMBER_TEMPERATURE_TARGET},
+      {{CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_HOUR, CONFIG_SCHEDULE_WEEKDAY_NIGHT_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT,
+       CHAMBER_TEMPERATURE_TARGET}}},
+    {FRIDAY,
+     2U,
+     {{{CONFIG_SCHEDULE_FRIDAY_DAY_START_HOUR, CONFIG_SCHEDULE_FRIDAY_DAY_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY,
+       CHAMBER_TEMPERATURE_TARGET},
+      {{CONFIG_SCHEDULE_FRIDAY_NIGHT_START_HOUR, CONFIG_SCHEDULE_FRIDAY_NIGHT_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT,
+       CHAMBER_TEMPERATURE_TARGET}}},
+    {SATURDAY,
+     2U,
+     {{{CONFIG_SCHEDULE_SATURDAY_DAY_START_HOUR, CONFIG_SCHEDULE_SATURDAY_DAY_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY,
+       CHAMBER_TEMPERATURE_TARGET},
+      {{CONFIG_SCHEDULE_SATURDAY_NIGHT_START_HOUR, CONFIG_SCHEDULE_SATURDAY_NIGHT_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT,
+       CHAMBER_TEMPERATURE_TARGET}}},
+    {SUNDAY,
+     2U,
+     {{{CONFIG_SCHEDULE_SUNDAY_DAY_START_HOUR, CONFIG_SCHEDULE_SUNDAY_DAY_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY,
+       CHAMBER_TEMPERATURE_TARGET},
+      {{CONFIG_SCHEDULE_SUNDAY_NIGHT_START_HOUR, CONFIG_SCHEDULE_SUNDAY_NIGHT_START_MINUTE},
+       RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT,
+       CHAMBER_TEMPERATURE_TARGET}}},
 };
+static sControlTemperatureEntry gCurrentControlEntry =
+    gControlTable[0].aTemperatureEntries[0];
+static SemaphoreHandle_t xMutexAccessControl = NULL;
 
+// Function prototypes
 void taskControl(void *pvParameters);
-eControlWeekday getCurrentWeekday(void);
+void findControlCurrentTemperatureEntry(void);
-sControlTemperatureEntry getCurrentTemperatureEntry(void);
+void setControlState(eControlState state);
 
 void initControl(void)
 {
-    BaseType_t taskCreated = xTaskCreate(
+
-        taskControl,   // Function to implement the task
+    xMutexAccessControl = xSemaphoreCreateRecursiveMutex();
+    if (xMutexAccessControl == NULL)
+    {
+        ESP_LOGE(TAG, "Unable to create mutex");
+    }
+    xSemaphoreGiveRecursive(xMutexAccessControl);
+
+    BaseType_t taskCreated =
+        xTaskCreate(taskControl,   // Function to implement the task
                     "taskControl", // Task name
                     8192,          // Stack size (in words, not bytes)
                     NULL,          // Parameters to the task function (none in this case)
@@ -56,177 +113,293 @@ void initControl(void)
 void taskControl(void *pvParameters)
 {
     bool bHeatingInAction = false;
-    bool bBurnerFaultDetected = false;
+    bool bSummerMode = false;
+    eBurnerState burnerState = BURNER_UNKNOWN;
     int64_t i64BurnerEnableTimestamp = esp_timer_get_time();
 
     while (1)
     {
         vTaskDelay(PERIODIC_INTERVAL * 1000U / portTICK_PERIOD_MS);
 
+        // Check for safety faults
         if (getSafetyState() != SAFETY_NO_ERROR)
         {
             ESP_LOGW(TAG, "Control not possible due to safety fault!");
-            sControlState = CONTROL_FAULT_SAFETY;
+            setControlState(CONTROL_FAULT_SAFETY);
-            if (bHeatingInAction == true)
-            {
-                ESP_LOGW(TAG, "Control not possible due to safety fault: Disable burner");
-                bHeatingInAction = false;
-                setCirculationPumpState(ENABLED);
-                setBurnerState(DISABLED);
-                setSafetyControlState(ENABLED);
-            }
-            continue;
-        }
-
-        if (getSntpState() != SYNC_SUCCESSFUL)
-        {
-            ESP_LOGW(TAG, "Control not possible due to sntp fault!");
-            sControlState = CONTROL_FAULT_SNTP;
-            if (bHeatingInAction == true)
-            {
-                ESP_LOGW(TAG, "Control not possible due to sntp fault: Disable burner");
-                bHeatingInAction = false;
-                setCirculationPumpState(ENABLED);
-                setBurnerState(DISABLED);
-                setSafetyControlState(ENABLED);
-            }
-            continue;
-        }
-
-        sControlTemperatureEntry currentControlEntry = getCurrentTemperatureEntry();
-        // ESP_LOGI(TAG, "Control Entry Hour: %i Minute: %i ChamberTemp: %lf ReturnFlowTemp: %lf", currentControlEntry.timestamp.hour, currentControlEntry.timestamp.minute, currentControlEntry.fChamberTemperature, currentControlEntry.fReturnFlowTemperature);
-
-        if (bHeatingInAction == true)
-        {
-            if ((getChamberTemperature().fCurrentValue >= currentControlEntry.fChamberTemperature) || (getChamberTemperature().predict60s.fValue >= currentControlEntry.fChamberTemperature))
-            {
-                ESP_LOGI(TAG, "Chamber Target Temperature reached: Disable burner");
-                bHeatingInAction = false;
-                setCirculationPumpState(ENABLED);
-                setBurnerState(DISABLED);
-                setSafetyControlState(ENABLED);
-            }
-            else
-            {
             if (bHeatingInAction)
             {
-                    int64_t i64Delta = esp_timer_get_time() - i64BurnerEnableTimestamp;
+                ESP_LOGW(TAG, "Disabling burner due to safety fault");
-
-                    if ((i64Delta / 1000000U) >= BURNER_FAULT_DETECTION_THRESHOLD)
-                    {
-                        if (getBurnerError() == FAULT)
-                        {
-                            ESP_LOGW(TAG, "Detected burner fault after %lli seconds!", (i64Delta / 1000000U));
-                            ESP_LOGW(TAG, "Control not possible due to burner fault: Disable burner");
-                            sControlState = CONTROL_FAULT_BURNER;
                 bHeatingInAction = false;
-                            bBurnerFaultDetected = true;
-                            setCirculationPumpState(ENABLED);
                 setBurnerState(DISABLED);
                 setSafetyControlState(ENABLED);
             }
-                    }
+            continue;
-                }
-            }
         }
 
-        if ((bHeatingInAction == false) && (bBurnerFaultDetected == false))
+        // Check for SNTP faults
+        if (getSntpState() != SYNC_SUCCESSFUL)
         {
-            if ((getReturnFlowTemperature().average60s.fValue <= currentControlEntry.fReturnFlowTemperature) && (getChamberTemperature().fCurrentValue <= 45.0))
+            ESP_LOGW(TAG, "Control not possible due to SNTP fault!");
+            setControlState(CONTROL_FAULT_SNTP);
+            if (bHeatingInAction)
             {
-                ESP_LOGI(TAG, "Return Flow Target Temperature reached: Enable Burner");
+                ESP_LOGW(TAG, "Disabling burner due to SNTP fault");
+                bHeatingInAction = false;
+                setBurnerState(DISABLED);
+                setSafetyControlState(ENABLED);
+            }
+            continue;
+        }
+
+        findControlCurrentTemperatureEntry();
+
+        if (getOutdoorTemperature().fDampedValue >=
+            SUMMER_MODE_TEMPERATURE_THRESHOLD_HIGH)
+        {
+            bSummerMode = true;
+        }
+        else if (getOutdoorTemperature().fDampedValue <=
+                 SUMMER_MODE_TEMPERATURE_THRESHOLD_LOW)
+        {
+            bSummerMode = false;
+        }
+
+        // Enable burner if outdoor temperature is low and return flow temperature
+        // is cooled down
+        if (!bHeatingInAction && (burnerState != BURNER_FAULT))
+        {
+            if (bSummerMode)
+            {
+                // ESP_LOGI(TAG, "Outdoor temperature too warm: Disabling heating");
+                setBurnerState(DISABLED);
+                setSafetyControlState(DISABLED);
+                setControlState(CONTROL_OUTDOOR_TOO_WARM);
+            }
+            else if ((getReturnFlowTemperature().average60s.fValue <=
+                      getControlCurrentTemperatureEntry().fReturnFlowTemperature) &&
+                     (getChamberTemperature().fCurrentValue <=
+                      CHAMBER_TEMPERATURE_THRESHOLD))
+            {
+                ESP_LOGI(TAG,
+                         "Enabling burner: Return flow temperature target reached");
+                burnerState = BURNER_UNKNOWN;
                 bHeatingInAction = true;
-                setCirculationPumpState(ENABLED);
                 setBurnerState(ENABLED);
                 setSafetyControlState(ENABLED);
                 i64BurnerEnableTimestamp = esp_timer_get_time();
-                sControlState = CONTROL_HEATING;
+                setControlState(CONTROL_HEATING);
             }
             else
             {
-                sControlState = CONTROL_RETURN_FLOW_TOO_WARM;
+                // ESP_LOGI(TAG, "Return flow temperature too warm: Disabling heating");
+                setControlState(CONTROL_RETURN_FLOW_TOO_WARM);
             }
         }
+
+        // Disable burner if target temperature is reached or a fault occurred
+        if (bHeatingInAction)
+        {
+            if ((getChamberTemperature().fCurrentValue >=
+                 getControlCurrentTemperatureEntry().fChamberTemperature) ||
+                (getChamberTemperature().predict60s.fValue >=
+                 getControlCurrentTemperatureEntry().fChamberTemperature))
+            {
+                ESP_LOGI(TAG, "Chamber target temperature reached: Disabling burner");
+                bHeatingInAction = false;
+                setBurnerState(DISABLED);
+                setSafetyControlState(ENABLED);
+            }
+            else if (esp_timer_get_time() - i64BurnerEnableTimestamp >=
+                     BURNER_FAULT_DETECTION_THRESHOLD * 1000000U)
+            {
+                if (burnerState == BURNER_UNKNOWN)
+                {
+                    if (getBurnerError() == FAULT)
+                    {
+                        // ESP_LOGW(TAG, "Burner fault detected: Disabling burner");
+                        bHeatingInAction = false;
+                        burnerState = BURNER_FAULT;
+                        setControlState(CONTROL_FAULT_BURNER);
+                        setBurnerState(DISABLED);
+                        setSafetyControlState(ENABLED);
+                    }
+                    else
+                    {
+                        // ESP_LOGI(TAG, "No burner fault detected: Marking burner as
+                        // fired");
+                        burnerState = BURNER_FIRED;
+                    }
+                }
+            }
+        }
+
+        // Manage circulation pump
+        if (getChamberTemperature().fCurrentValue <=
+            CIRCULATION_PUMP_TEMPERATURE_THRESHOLD)
+        {
+            // ESP_LOGI(TAG, "Burner cooled down: Disabling circulation pump");
+            setCirculationPumpState(DISABLED);
+        }
+        else
+        {
+            // ESP_LOGI(TAG, "Burner heated: Enabling circulation pump");
+            setCirculationPumpState(ENABLED);
+        }
+    } // End of while(1)
+}
+
+void setControlState(eControlState state)
+{
+
+    if (xSemaphoreTakeRecursive(xMutexAccessControl, pdMS_TO_TICKS(5000)) == pdTRUE)
+    {
+        gControlState = state;
+        xSemaphoreGiveRecursive(xMutexAccessControl);
+    }
+    else
+    {
+        ESP_LOGE(TAG, "Unable to take mutex: setControlState()");
     }
 }
 
 eControlState getControlState(void)
 {
-    return sControlState;
-}
 
-eControlWeekday getCurrentWeekday(void)
+    eControlState ret = CONTROL_FAULT_SAFETY;
-{
-    time_t now;
-    struct tm *timeinfo;
 
-    // Get the current time
+    if (xSemaphoreTakeRecursive(xMutexAccessControl, pdMS_TO_TICKS(5000)) == pdTRUE)
-    time(&now);
-    timeinfo = localtime(&now); // Convert to local time
-
-    // Get the day of the week (0 = Sunday, 1 = Monday, ..., 6 = Saturday)
-    int day = timeinfo->tm_wday;
-
-    // Adjust so that Monday = 0, Sunday = 6
-    if (day == 0)
     {
-        day = 6; // Sunday becomes 6
+        ret = gControlState;
+        xSemaphoreGiveRecursive(xMutexAccessControl);
     }
     else
     {
-        day -= 1; // Shift other days to make Monday = 0
+        ESP_LOGE(TAG, "Unable to take mutex: getControlState()");
     }
 
-    return (eControlWeekday)day;
+    return ret;
 }
 
-sControlTemperatureEntry getCurrentTemperatureEntry(void)
+eControlWeekday getControlCurrentWeekday(void)
 {
-    sControlTemperatureEntry result = aControlTable[0].aTemperatureEntries[0];
+    // Get current time
-    eControlWeekday currentDay = getCurrentWeekday();
     time_t now;
     struct tm timeinfo;
-
-    // Get the current time
     time(&now);
-    // Convert to local time structure
     localtime_r(&now, &timeinfo);
-    // Extract hour and minute
-    int hour = timeinfo.tm_hour;  // Hour (0-23)
-    int minute = timeinfo.tm_min; // Minute (0-59)u
 
-    // ESP_LOGI(TAG, "Current Day: %i Hour: %i Minute: %i", currentDay, hour, minute);
+    int day = timeinfo.tm_wday;
-
+    return (eControlWeekday)((day == 0) ? 6 : day - 1);
-    for (int i = 0; i < sizeof(aControlTable) / sizeof(aControlTable[0]); i++)
+}
-    {
+
-        /// loops through days
+/**
-        // ESP_LOGI(TAG, "Day %d: %d", i + 1, aControlTable[i].day);
+ * @brief Finds the active temperature control entry for the current time.
-        // int numberOfEntries = aControlTable[i].entryCount;
+ *
-        // ESP_LOGI(TAG, "Number of entries: %i", numberOfEntries);
+ * Searches through the weekly schedule to find the most recent entry
-
+ * that should be active at the current date/time. Falls back to the
-        for (int j = 0; j < aControlTable[i].entryCount; j++)
+ * last entry in the week if no suitable entry is found.
-        {
+ */
-            if ((aControlTable[i].day) > currentDay)
+/**
-            {
+ * @brief Finds the active temperature control entry for the current time.
-                // ESP_LOGI(TAG, "DAY Return Control Entry Day: %i Hour: %i Minute: %i ChamberTemp: %lf ReturnFlowTemp: %lf", aControlTable[i].day, aControlTable[i].aTemperatureEntries[j].timestamp.hour, aControlTable[i].aTemperatureEntries[j].timestamp.minute, aControlTable[i].aTemperatureEntries[j].fChamberTemperature, aControlTable[i].aTemperatureEntries[j].fReturnFlowTemperature);
+ *
-                return result;
+ * Searches through the weekly schedule to find the most recent entry
-            }
+ * that should be active at the current date/time. Falls back to the
-
+ * last entry in the week if no suitable entry is found.
-            if ((aControlTable[i].day == currentDay) && (aControlTable[i].aTemperatureEntries[j].timestamp.hour > hour))
+ */
-            {
+void findControlCurrentTemperatureEntry(void)
-                // ESP_LOGI(TAG, "HOUR Return Control Entry Day: %i Hour: %i Minute: %i ChamberTemp: %lf ReturnFlowTemp: %lf", aControlTable[i].day, aControlTable[i].aTemperatureEntries[j].timestamp.hour, aControlTable[i].aTemperatureEntries[j].timestamp.minute, aControlTable[i].aTemperatureEntries[j].fChamberTemperature, aControlTable[i].aTemperatureEntries[j].fReturnFlowTemperature);
+{
-                return result;
+    eControlWeekday currentDay = getControlCurrentWeekday();
-            }
+
-
+    // Get current time
-            if ((aControlTable[i].day == currentDay) && (aControlTable[i].aTemperatureEntries[j].timestamp.hour == hour) && (aControlTable[i].aTemperatureEntries[j].timestamp.minute == minute))
+    time_t now;
-            {
+    struct tm timeinfo;
-                // ESP_LOGI(TAG, "MINUTE Return Control Entry Day: %i Hour: %i Minute: %i ChamberTemp: %lf ReturnFlowTemp: %lf", aControlTable[i].day, aControlTable[i].aTemperatureEntries[j].timestamp.hour, aControlTable[i].aTemperatureEntries[j].timestamp.minute, aControlTable[i].aTemperatureEntries[j].fChamberTemperature, aControlTable[i].aTemperatureEntries[j].fReturnFlowTemperature);
+    time(&now);
-                return result;
+    localtime_r(&now, &timeinfo);
-            }
+
-
+    int currentHour = timeinfo.tm_hour;
-            // ESP_LOGI(TAG, "SET Return Control Entry Day: %i Hour: %i Minute: %i ChamberTemp: %lf ReturnFlowTemp: %lf", aControlTable[i].day, aControlTable[i].aTemperatureEntries[j].timestamp.hour, aControlTable[i].aTemperatureEntries[j].timestamp.minute, aControlTable[i].aTemperatureEntries[j].fChamberTemperature, aControlTable[i].aTemperatureEntries[j].fReturnFlowTemperature);
+    int currentMinute = timeinfo.tm_min;
-            result = aControlTable[i].aTemperatureEntries[j];
+
-        }
+    if (xSemaphoreTakeRecursive(xMutexAccessControl, pdMS_TO_TICKS(5000)) == pdTRUE)
-    }
+    {
-    return result;
+
+        // ESP_LOGI(TAG, "Searching for control entry - Day: %d, Time: %02d:%02d", currentDay, currentHour, currentMinute);
+
+        // Search through all days and entries
+        for (int dayIndex = 0; dayIndex < 7; dayIndex++)
+        {
+            const sControlDay *day = &gControlTable[dayIndex];
+
+            for (int entryIndex = 0; entryIndex < day->entryCount; entryIndex++)
+            {
+                const sControlTemperatureEntry *entry = &day->aTemperatureEntries[entryIndex];
+
+                // Check if this entry is in the future (next active entry)
+                bool isFutureDay = (day->day > currentDay);
+                bool isTodayFutureTime = (day->day == currentDay) &&
+                                         ((entry->timestamp.hour > currentHour) ||
+                                          (entry->timestamp.hour == currentHour &&
+                                           entry->timestamp.minute > currentMinute));
+
+                if (isFutureDay || isTodayFutureTime)
+                {
+
+                    // Found next scheduled entry, so determine the previous (active) one
+                    if (entryIndex > 0)
+                    {
+                        // Use previous entry from same day
+                        gCurrentControlEntry = day->aTemperatureEntries[entryIndex - 1];
+                    }
+                    else if (dayIndex > 0)
+                    {
+                        // Use last entry from previous day
+                        const sControlDay *previousDay = &gControlTable[dayIndex - 1];
+                        gCurrentControlEntry = previousDay->aTemperatureEntries[previousDay->entryCount - 1];
+                    }
+                    else
+                    {
+                        // First entry of the week - wrap to last entry of Sunday
+                        const sControlDay *sunday = &gControlTable[6];
+                        gCurrentControlEntry = sunday->aTemperatureEntries[sunday->entryCount - 1];
+                    }
+                    /*
+                    ESP_LOGI(TAG, "Active entry found - Time: %02d:%02d, "
+                             "Return Temp: %lf, Chamber Temp: %lf",
+                                 gCurrentControlEntry.timestamp.hour,
+                                 gCurrentControlEntry.timestamp.minute,
+                                 gCurrentControlEntry.fReturnFlowTemperature,
+                                 gCurrentControlEntry.fChamberTemperature);
+                             */
+                    return;
+                }
+            }
+        }
+
+        // If we reached here, current time is after all entries this week
+        // Use the last entry (Sunday evening)
+        const sControlDay *sunday = &gControlTable[6];
+        gCurrentControlEntry = sunday->aTemperatureEntries[sunday->entryCount - 1];
+
+        // ESP_LOGI(TAG, "Using last entry of week - Time: %02d:%02d", gCurrentControlEntry.timestamp.hour, gCurrentControlEntry.timestamp.minute);
+        xSemaphoreGiveRecursive(xMutexAccessControl);
+    }
+    else
+    {
+        ESP_LOGE(TAG, "Unable to take mutex: findControlCurrentTemperatureEntry()");
+    }
+}
+
+sControlTemperatureEntry getControlCurrentTemperatureEntry(void)
+{
+    sControlTemperatureEntry ret = gControlTable[0].aTemperatureEntries[0];
+    if (xSemaphoreTakeRecursive(xMutexAccessControl, pdMS_TO_TICKS(5000)) == pdTRUE)
+    {
+        ret = gCurrentControlEntry;
+        xSemaphoreGiveRecursive(xMutexAccessControl);
+    }
+    else
+    {
+        ESP_LOGE(TAG, "Unable to take mutex: getControlCurrentTemperatureEntry()");
+    }
+
+    return ret;
 }

main/control.h

@@ -1,8 +1,20 @@
 #pragma once
+
+#include "sdkconfig.h"
+
 #include <time.h>
 
 #define MAX_TEMPERATURE_ENTRIES_PER_DAY 24U
 
+#define RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_DAY (CONFIG_TEMP_RETURN_FLOW_LOWER_LIMIT_DAY / 10.0f)
+#define RETURN_FLOW_TEMPERATURE_LOWER_LIMIT_NIGHT (CONFIG_TEMP_RETURN_FLOW_LOWER_LIMIT_NIGHT / 10.0f)
+#define CHAMBER_TEMPERATURE_TARGET (CONFIG_TEMP_CHAMBER_TARGET / 10.0f)
+#define CHAMBER_TEMPERATURE_THRESHOLD (CONFIG_TEMP_CHAMBER_THRESHOLD / 10.0f)
+#define SUMMER_MODE_TEMPERATURE_THRESHOLD_HIGH (CONFIG_TEMP_SUMMER_MODE_HIGH / 10.0f)
+#define SUMMER_MODE_TEMPERATURE_THRESHOLD_LOW (CONFIG_TEMP_SUMMER_MODE_LOW / 10.0f)
+#define CIRCULATION_PUMP_TEMPERATURE_THRESHOLD (CONFIG_TEMP_CIRCULATION_PUMP_THRESHOLD / 10.0f)
+#define BURNER_FAULT_DETECTION_THRESHOLD CONFIG_BURNER_FAULT_DETECTION_SECONDS
+
 typedef enum _ControlState
 {
     CONTROL_STARTING,
@@ -14,6 +26,13 @@ typedef enum _ControlState
     CONTROL_FAULT_SNTP,
 } eControlState;
 
+typedef enum _BurnerState
+{
+    BURNER_UNKNOWN, // Burner is disabled or state after enabling is still unkown
+    BURNER_FIRED,   // Burner fired successfully
+    BURNER_FAULT    // Burner was unable to fire successfully
+} eBurnerState;
+
 typedef enum _ControlWeekday
 {
     MONDAY,
@@ -47,3 +66,5 @@ typedef struct _ControlDay
 
 void initControl(void);
 eControlState getControlState(void);
+eControlWeekday getControlCurrentWeekday(void);
+sControlTemperatureEntry getControlCurrentTemperatureEntry(void);

main/inputs.c

@@ -1,25 +1,26 @@
+#include "inputs.h"
+
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "driver/gpio.h"
-#include <string.h>
-#include <math.h>
 #include "esp_log.h"
 #include <ds18x20.h>
 
-#include "inputs.h"
+#include <string.h>
+#include <math.h>
 
 #define MAX_DN18B20_SENSORS 4U
 #define ONE_WIRE_LOOPS 4U    // try to read the 1-Wire sensors that often
 #define PERIODIC_INTERVAL 1U // read and compute the inputs every 1sec
 
 static const char *TAG = "smart-oil-heater-control-system-inputs";
-const uint8_t uBurnerFaultPin = 19U;
+const uint8_t uBurnerFaultPin = CONFIG_GPIO_BURNER_FAULT;
-const uint8_t uDS18B20Pin = 4U;
+const uint8_t uDS18B20Pin = CONFIG_GPIO_DS18B20_ONEWIRE;
 
-const onewire_addr_t uChamperTempSensorAddr = 0xd00000108cd01d28;
+const onewire_addr_t uChamperTempSensorAddr = CONFIG_ONEWIRE_ADDR_CHAMBER_TEMP;
-const onewire_addr_t uOutdoorTempSensorAddr = 0x78000000c6c2f728;
+const onewire_addr_t uOutdoorTempSensorAddr = CONFIG_ONEWIRE_ADDR_OUTDOOR_TEMP;
-const onewire_addr_t uInletFlowTempSensorAddr = 0x410000108b8c0628;
+const onewire_addr_t uInletFlowTempSensorAddr = CONFIG_ONEWIRE_ADDR_INLET_FLOW_TEMP;
-const onewire_addr_t uReturnFlowTempSensorAddr = 0x90000108cc77c28;
+const onewire_addr_t uReturnFlowTempSensorAddr = CONFIG_ONEWIRE_ADDR_RETURN_FLOW_TEMP;
 
 onewire_addr_t uOneWireAddresses[MAX_DN18B20_SENSORS];
 float fDS18B20Temps[MAX_DN18B20_SENSORS];
@@ -49,7 +50,12 @@ void initInputs(void)
         .intr_type = GPIO_INTR_DISABLE             // Disable interrupts
     };
 
-    gpio_config(&ioConfBurnerFault);
+    esp_err_t ret = gpio_config(&ioConfBurnerFault);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "GPIO config failed: %s", esp_err_to_name(ret));
+        return;
+    }
 
     xMutexAccessInputs = xSemaphoreCreateRecursiveMutex();
     if (xMutexAccessInputs == NULL)
@@ -88,22 +94,23 @@ void initMeasurement(sMeasurement *pMeasurement)
         return;
 
     pMeasurement->state = MEASUREMENT_FAULT;
-    pMeasurement->fCurrentValue = 0.0f;
+    pMeasurement->fCurrentValue = INITIALISATION_VALUE;
+    pMeasurement->fDampedValue = INITIALISATION_VALUE;
 
-    pMeasurement->average10s.fValue = 0.0f;
+    pMeasurement->average10s.fValue = INITIALISATION_VALUE;
     pMeasurement->average10s.bufferCount = 0U;
     pMeasurement->average10s.bufferIndex = 0U;
-    memset(pMeasurement->average10s.samples, 0U, AVG10_SAMPLE_SIZE);
+    memset(pMeasurement->average10s.samples, 0U, sizeof(float) * AVG10S_SAMPLE_SIZE);
 
-    pMeasurement->average60s.fValue = 0.0f;
+    pMeasurement->average60s.fValue = INITIALISATION_VALUE;
     pMeasurement->average60s.bufferCount = 0U;
     pMeasurement->average60s.bufferIndex = 0U;
-    memset(pMeasurement->average60s.samples, 0U, AVG60_SAMPLE_SIZE);
+    memset(pMeasurement->average60s.samples, 0U, sizeof(float) * AVG60S_SAMPLE_SIZE);
 
-    pMeasurement->predict60s.fValue = 0.0f;
+    pMeasurement->predict60s.fValue = INITIALISATION_VALUE;
     pMeasurement->predict60s.bufferCount = 0U;
     pMeasurement->predict60s.bufferIndex = 0U;
-    memset(pMeasurement->predict60s.samples, 0U, PRED60_SAMPLE_SIZE);
+    memset(pMeasurement->predict60s.samples, 0U, sizeof(float) * PRED60S_SAMPLE_SIZE);
 }
 
 void updateAverage(sMeasurement *pMeasurement)
@@ -113,26 +120,33 @@ void updateAverage(sMeasurement *pMeasurement)
 
     // Average form the last 10sec
     pMeasurement->average10s.samples[pMeasurement->average10s.bufferIndex] = pMeasurement->fCurrentValue;
-    pMeasurement->average10s.bufferIndex = (pMeasurement->average10s.bufferIndex + 1) % AVG10_SAMPLE_SIZE;
+    pMeasurement->average10s.bufferIndex = (pMeasurement->average10s.bufferIndex + 1) % AVG10S_SAMPLE_SIZE;
 
-    if (pMeasurement->average10s.bufferCount < AVG10_SAMPLE_SIZE)
+    if (pMeasurement->average10s.bufferCount < AVG10S_SAMPLE_SIZE)
     {
         pMeasurement->average10s.bufferCount++;
     }
 
     float sum = 0.0;
-    for (int i = 0; i <= pMeasurement->average10s.bufferCount; i++)
+    for (int i = 0; i < pMeasurement->average10s.bufferCount; i++)
     {
         sum += pMeasurement->average10s.samples[i];
     }
 
+    if (pMeasurement->average10s.bufferCount == 0U)
+    {
+        pMeasurement->average10s.fValue = 0.0f;
+    }
+    else
+    {
         pMeasurement->average10s.fValue = sum / pMeasurement->average10s.bufferCount;
+    }
 
     // Average form the last 60sec
     pMeasurement->average60s.samples[pMeasurement->average60s.bufferIndex] = pMeasurement->fCurrentValue;
-    pMeasurement->average60s.bufferIndex = (pMeasurement->average60s.bufferIndex + 1) % AVG60_SAMPLE_SIZE;
+    pMeasurement->average60s.bufferIndex = (pMeasurement->average60s.bufferIndex + 1) % AVG60S_SAMPLE_SIZE;
 
-    if (pMeasurement->average60s.bufferCount < AVG60_SAMPLE_SIZE)
+    if (pMeasurement->average60s.bufferCount < AVG60S_SAMPLE_SIZE)
     {
         pMeasurement->average60s.bufferCount++;
     }
@@ -143,7 +157,32 @@ void updateAverage(sMeasurement *pMeasurement)
         sum += pMeasurement->average60s.samples[i];
     }
 
+    if (pMeasurement->average60s.bufferCount == 0U)
+    {
+        pMeasurement->average60s.fValue = 0.0f;
+    }
+    else
+    {
         pMeasurement->average60s.fValue = sum / pMeasurement->average60s.bufferCount;
+    }
+
+    // Damped current value
+    if (pMeasurement->fDampedValue == INITIALISATION_VALUE)
+    {
+        pMeasurement->fDampedValue = pMeasurement->fCurrentValue;
+    }
+    else
+    {
+        if (pMeasurement->fCurrentValue > pMeasurement->fDampedValue)
+        {
+            pMeasurement->fDampedValue = pMeasurement->fDampedValue + (DAMPING_FACTOR_WARMER * (pMeasurement->fCurrentValue - pMeasurement->fDampedValue));
+        }
+
+        if (pMeasurement->fCurrentValue < pMeasurement->fDampedValue)
+        {
+            pMeasurement->fDampedValue = pMeasurement->fDampedValue - (DAMPING_FACTOR_COLDER * (pMeasurement->fDampedValue - pMeasurement->fCurrentValue));
+        }
+    }
 }
 
 void updatePrediction(sMeasurement *pMeasurement)
@@ -154,8 +193,8 @@ void updatePrediction(sMeasurement *pMeasurement)
     // Update predict60s buffer
     sPredict *predict60s = &pMeasurement->predict60s;
     predict60s->samples[predict60s->bufferIndex] = pMeasurement->fCurrentValue;
-    predict60s->bufferIndex = (predict60s->bufferIndex + 1) % PRED60_SAMPLE_SIZE;
+    predict60s->bufferIndex = (predict60s->bufferIndex + 1) % PRED60S_SAMPLE_SIZE;
-    if (predict60s->bufferCount < PRED60_SAMPLE_SIZE)
+    if (predict60s->bufferCount < PRED60S_SAMPLE_SIZE)
         predict60s->bufferCount++;
 
     // Predict 60s future value using linear regression
@@ -271,9 +310,9 @@ void taskInput(void *pvParameters)
 float linearRegressionPredict(const float *samples, size_t count, size_t bufferIndex, float futureIndex)
 {
     if (count == 0)
-        return 0.0f; // No prediction possible with no data
+        return INITIALISATION_VALUE; // No prediction possible with no data
 
-    float sumX = 0.0f, sumY = 0.0f, sumXY = 0.0f, sumX2 = 0.0f;
+    float sumX = INITIALISATION_VALUE, sumY = INITIALISATION_VALUE, sumXY = INITIALISATION_VALUE, sumX2 = INITIALISATION_VALUE;
 
     for (size_t i = 0; i < count; i++)
     {

main/inputs.h

@@ -1,9 +1,17 @@
 #pragma once
 
+#include "sdkconfig.h"
+
+#include <stddef.h>
+
 #define MAX(a, b) ((a) > (b) ? (a) : (b))
-#define AVG10_SAMPLE_SIZE 10U
+#define INITIALISATION_VALUE 0.0f
-#define AVG60_SAMPLE_SIZE 60U
+#define AVG10S_SAMPLE_SIZE 10U
-#define PRED60_SAMPLE_SIZE 60U
+#define AVG60S_SAMPLE_SIZE 60U
+#define AVG24H_SAMPLE_SIZE 24U
+#define PRED60S_SAMPLE_SIZE 60U
+#define DAMPING_FACTOR_WARMER (CONFIG_DAMPING_FACTOR_WARMER * 0.00001f)
+#define DAMPING_FACTOR_COLDER (CONFIG_DAMPING_FACTOR_COLDER * 0.00001f)
 
 typedef enum _BurnerErrorState
 {
@@ -20,7 +28,7 @@ typedef enum _MeasurementErrorState
 typedef struct _Average
 {
     float fValue;
-    float samples[MAX(AVG10_SAMPLE_SIZE, AVG60_SAMPLE_SIZE)];
+    float samples[MAX(AVG10S_SAMPLE_SIZE, MAX(AVG60S_SAMPLE_SIZE, AVG24H_SAMPLE_SIZE))];
     size_t bufferIndex;
     size_t bufferCount;
 } sAverage;
@@ -28,7 +36,7 @@ typedef struct _Average
 typedef struct _Predict
 {
     float fValue;
-    float samples[PRED60_SAMPLE_SIZE];
+    float samples[PRED60S_SAMPLE_SIZE];
     size_t bufferIndex;
     size_t bufferCount;
 } sPredict;
@@ -36,6 +44,7 @@ typedef struct _Predict
 typedef struct _Measurement
 {
     float fCurrentValue;
+    float fDampedValue;
     sAverage average10s;
     sAverage average60s;
     sPredict predict60s;

main/main.c

@@ -1,7 +1,3 @@
-#include "esp_log.h"
-#include <esp_system.h>
-#include "nvs_flash.h"
-
 #include "safety.h"
 #include "metrics.h"
 #include "outputs.h"
@@ -10,6 +6,10 @@
 #include "wifi.h"
 #include "sntp.h"
 
+#include "esp_log.h"
+#include "esp_system.h"
+#include "nvs_flash.h"
+
 static const char *TAG = "smart-oil-heater-control-system";
 
 void app_main(void)

main/metrics.c

@@ -1,12 +1,3 @@
-#include <string.h>
-#include "esp_timer.h"
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "esp_wifi.h"
-#include "esp_log.h"
-#include <time.h>
-#include <sys/time.h>
-
 #include "metrics.h"
 #include "outputs.h"
 #include "inputs.h"
@@ -14,6 +5,16 @@
 #include "sntp.h"
 #include "control.h"
 
+#include "esp_timer.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "esp_wifi.h"
+#include "esp_log.h"
+
+#include <string.h>
+#include <time.h>
+#include <sys/time.h>
+
 static const char *TAG = "smart-oil-heater-control-system-metrics";
 
 char caHtmlResponse[HTML_RESPONSE_SIZE];
@@ -128,6 +129,12 @@ void taskMetrics(void *pvParameters)
         aMetrics[u16MetricCounter].fMetricValue = getChamberTemperature().average60s.fValue;
         u16MetricCounter++;
 
+        // Chamber Temperature Damped
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "chamber_temperature_damped");
+        aMetrics[u16MetricCounter].type = FLOAT;
+        aMetrics[u16MetricCounter].fMetricValue = getChamberTemperature().fDampedValue;
+        u16MetricCounter++;
+
         // Chamber Temperature Predict 60s
         strcpy(aMetrics[u16MetricCounter].caMetricName, "chamber_temperature_pred60");
         aMetrics[u16MetricCounter].type = FLOAT;
@@ -152,6 +159,12 @@ void taskMetrics(void *pvParameters)
         aMetrics[u16MetricCounter].fMetricValue = getInletFlowTemperature().average60s.fValue;
         u16MetricCounter++;
 
+        // Inlet Flow Temperature Damped
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "inlet_flow_temperature_damped");
+        aMetrics[u16MetricCounter].type = FLOAT;
+        aMetrics[u16MetricCounter].fMetricValue = getInletFlowTemperature().fDampedValue;
+        u16MetricCounter++;
+
         // Inlet Flow Temperature Predict 60s
         strcpy(aMetrics[u16MetricCounter].caMetricName, "inlet_flow_temperature_pred60");
         aMetrics[u16MetricCounter].type = FLOAT;
@@ -176,6 +189,12 @@ void taskMetrics(void *pvParameters)
         aMetrics[u16MetricCounter].fMetricValue = getOutdoorTemperature().average60s.fValue;
         u16MetricCounter++;
 
+        // Outdoor Temperature Average Damped
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "outdoor_temperature_damped");
+        aMetrics[u16MetricCounter].type = FLOAT;
+        aMetrics[u16MetricCounter].fMetricValue = getOutdoorTemperature().fDampedValue;
+        u16MetricCounter++;
+
         // Outdoor Temperature Predict 60s
         strcpy(aMetrics[u16MetricCounter].caMetricName, "outdoor_temperature_pred60");
         aMetrics[u16MetricCounter].type = FLOAT;
@@ -200,6 +219,12 @@ void taskMetrics(void *pvParameters)
         aMetrics[u16MetricCounter].fMetricValue = getReturnFlowTemperature().average60s.fValue;
         u16MetricCounter++;
 
+        // Return Flow Temperature Damped
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "return_flow_temperature_damped");
+        aMetrics[u16MetricCounter].type = FLOAT;
+        aMetrics[u16MetricCounter].fMetricValue = getReturnFlowTemperature().fDampedValue;
+        u16MetricCounter++;
+
         // Return Flow Temperature Predict 60s
         strcpy(aMetrics[u16MetricCounter].caMetricName, "return_flow_temperature_pred60");
         aMetrics[u16MetricCounter].type = FLOAT;
@@ -230,6 +255,31 @@ void taskMetrics(void *pvParameters)
         aMetrics[u16MetricCounter].u8MetricValue = getControlState();
         u16MetricCounter++;
 
+        // Control Current Weekday
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "control_current_weekday");
+        aMetrics[u16MetricCounter].type = INTEGER_U8;
+        aMetrics[u16MetricCounter].u8MetricValue = getControlCurrentWeekday();
+        u16MetricCounter++;
+
+        // Control Current Entry Time
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "control_current_entry_time");
+        aMetrics[u16MetricCounter].type = INTEGER_64;
+        int64_t i64SecondsSinceMidnight = (getControlCurrentTemperatureEntry().timestamp.hour * 60U * 60U) + (getControlCurrentTemperatureEntry().timestamp.minute * 60U);
+        aMetrics[u16MetricCounter].i64MetricValue = i64SecondsSinceMidnight;
+        u16MetricCounter++;
+
+        // Control Current Entry Chamber Temperature
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "control_current_entry_chamber_temperature");
+        aMetrics[u16MetricCounter].type = FLOAT;
+        aMetrics[u16MetricCounter].fMetricValue = getControlCurrentTemperatureEntry().fChamberTemperature;
+        u16MetricCounter++;
+
+        // Control Current Entry Return Flow Temperature
+        strcpy(aMetrics[u16MetricCounter].caMetricName, "control_current_entry_return_flow_temperature");
+        aMetrics[u16MetricCounter].type = FLOAT;
+        aMetrics[u16MetricCounter].fMetricValue = getControlCurrentTemperatureEntry().fReturnFlowTemperature;
+        u16MetricCounter++;
+
         // SNTP State
         strcpy(aMetrics[u16MetricCounter].caMetricName, "sntp_state");
         aMetrics[u16MetricCounter].type = INTEGER_U8;
@@ -252,22 +302,23 @@ void taskMetrics(void *pvParameters)
 
         // Wifi RSSI
         wifi_ap_record_t ap;
-        esp_wifi_sta_get_ap_info(&ap);
+        ap.rssi = 0U;
+        ESP_ERROR_CHECK(esp_wifi_sta_get_ap_info(&ap));
         strcpy(aMetrics[u16MetricCounter].caMetricName, "wifi_rssi");
         aMetrics[u16MetricCounter].type = INTEGER_64;
         aMetrics[u16MetricCounter].i64MetricValue = ap.rssi;
         u16MetricCounter++;
 
+        configASSERT(!(u16MetricCounter > METRIC_MAX_COUNT));
         vSetMetrics(aMetrics, u16MetricCounter);
     }
 }
 
 void vSetMetrics(sMetric *paMetrics, uint16_t u16Size)
 {
-
     if (xSemaphoreTakeRecursive(xMutexAccessMetricResponse, pdMS_TO_TICKS(5000)) == pdTRUE)
     {
-        memset(caHtmlResponse, 0U, strlen(caHtmlResponse));
+        memset(caHtmlResponse, 0U, HTML_RESPONSE_SIZE);
         for (uint16_t u16Index = 0U; u16Index < u16Size; u16Index++)
         {
             char caValueBuffer[64];

main/metrics.h

@@ -4,7 +4,7 @@
 
 #define HTML_RESPONSE_SIZE 4096U
 #define METRIC_NAME_MAX_SIZE 64U
-#define METRIC_MAX_COUNT 32U
+#define METRIC_MAX_COUNT 38U
 
 typedef enum _MetricValueType
 {

main/outputs.c

@@ -1,14 +1,15 @@
+#include "outputs.h"
+
+#include "sdkconfig.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "driver/gpio.h"
 #include "esp_log.h"
 
-#include "outputs.h"
-
 static const char *TAG = "smart-oil-heater-control-system-outputs";
-const uint8_t uCirculationPumpGpioPin = 27U;
+const uint8_t uCirculationPumpGpioPin = CONFIG_GPIO_CIRCULATION_PUMP;
-const uint8_t uBurnerGpioPin = 14U;
+const uint8_t uBurnerGpioPin = CONFIG_GPIO_BURNER;
-const uint8_t uSafetyContactGpioPin = 12U;
+const uint8_t uSafetyContactGpioPin = CONFIG_GPIO_SAFETY_CONTACT;
 
 static SemaphoreHandle_t xMutexAccessOutputs = NULL;
 static eOutput sCirculationPumpState;
@@ -41,9 +42,26 @@ void initOutputs(void)
         .intr_type = GPIO_INTR_DISABLE                   // Disable interrupts
     };
 
-    gpio_config(&ioConfCirculationPump);
+    esp_err_t ret = gpio_config(&ioConfCirculationPump);
-    gpio_config(&ioConfBurner);
+    if (ret != ESP_OK)
-    gpio_config(&ioConfSafetyContact);
+    {
+        ESP_LOGE(TAG, "GPIO config failed: %s", esp_err_to_name(ret));
+        return;
+    }
+
+    ret = gpio_config(&ioConfBurner);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "GPIO config failed: %s", esp_err_to_name(ret));
+        return;
+    }
+
+    ret = gpio_config(&ioConfSafetyContact);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "GPIO config failed: %s", esp_err_to_name(ret));
+        return;
+    }
 
     xMutexAccessOutputs = xSemaphoreCreateRecursiveMutex();
     if (xMutexAccessOutputs == NULL)
@@ -55,7 +73,17 @@ void initOutputs(void)
 
 eOutput getCirculationPumpState(void)
 {
-    return sCirculationPumpState;
+    eOutput ret = ENABLED;
+    if (xSemaphoreTakeRecursive(xMutexAccessOutputs, pdMS_TO_TICKS(5000)) == pdTRUE)
+    {
+        ret = sCirculationPumpState;
+        xSemaphoreGiveRecursive(xMutexAccessOutputs);
+    }
+    else
+    {
+        ESP_LOGE(TAG, "Unable to take mutex: getCirculationPumpState()");
+    }
+    return ret;
 }
 
 void setCirculationPumpState(eOutput in)
@@ -70,6 +98,7 @@ void setCirculationPumpState(eOutput in)
             break;
         case DISABLED:
             gpio_set_level(uCirculationPumpGpioPin, 1U); // Switch off Circulation Pump
+            break;
         default:
             break;
         }
@@ -108,6 +137,7 @@ void setBurnerState(eOutput in)
             break;
         case DISABLED:
             gpio_set_level(uBurnerGpioPin, 1U); // Switch off Burner
+            break;
         default:
             break;
         }
@@ -146,6 +176,7 @@ void setSafetyControlState(eOutput in)
             break;
         case DISABLED:
             gpio_set_level(uSafetyContactGpioPin, 1U); // Switch off power for Burner
+            break;
         default:
             break;
         }

main/safety.c

@@ -1,19 +1,22 @@
+#include "safety.h"
+
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_log.h"
+
 #include <string.h>
-#include "safety.h"
+#include <math.h>
 
 #define PERIODIC_INTERVAL 1U                                           // run safety checks every 1sec
-#define SENSOR_GRACE_PERIOD (60U * 30U) // period that a sensor can report the same reading in seconds
+#define SENSOR_GRACE_PERIOD (CONFIG_SENSOR_GRACE_PERIOD_MINUTES * 60U) // period that a sensor can report the same reading in seconds
-
+#define FLOAT_EPSILON 0.0001f
 static const char *TAG = "smart-oil-heater-control-system-safety";
 static SemaphoreHandle_t xMutexAccessSafety = NULL;
 static sSensorSanityCheck sanityChecks[NUMBER_OF_SENSOR_SANITY_CHECKS] = {
-    {SENSOR_NO_ERROR, "chamber_temperature", {95.0f, -10.0f}, 0.0f, 0U, getChamberTemperature},
+    {SENSOR_NO_ERROR, "chamber_temperature", {SENSOR_LIMIT_CHAMBER_MAX, SENSOR_LIMIT_CHAMBER_MIN}, 0.0f, 0U, getChamberTemperature},
-    {SENSOR_NO_ERROR, "outdoor_temperature", {45.0f, -20.0f}, 0.0f, 0U, getOutdoorTemperature},
+    {SENSOR_NO_ERROR, "outdoor_temperature", {SENSOR_LIMIT_OUTDOOR_MAX, SENSOR_LIMIT_OUTDOOR_MIN}, 0.0f, 0U, getOutdoorTemperature},
-    {SENSOR_NO_ERROR, "inlet_flow_temperature", {95.0f, -10.0f}, 0.0f, 0U, getInletFlowTemperature},
+    {SENSOR_NO_ERROR, "inlet_flow_temperature", {SENSOR_LIMIT_INLET_MAX, SENSOR_LIMIT_INLET_MIN}, 0.0f, 0U, getInletFlowTemperature},
-    {SENSOR_NO_ERROR, "return_flow_temperature", {95.0f, -10.0f}, 0.0f, 0U, getReturnFlowTemperature}};
+    {SENSOR_NO_ERROR, "return_flow_temperature", {SENSOR_LIMIT_RETURN_MAX, SENSOR_LIMIT_RETURN_MIN}, 0.0f, 0U, getReturnFlowTemperature}};
 static eSafetyState sSafetyState = SAFETY_NO_ERROR;
 
 void taskSafety(void *pvParameters);
@@ -91,7 +94,7 @@ void checkSensorSanity(void)
         }
         else
         {
-            if (sCurrentMeasurement.fCurrentValue == sanityChecks[i].fSensorTemperatureLast)
+            if (fabsf(sCurrentMeasurement.fCurrentValue - sanityChecks[i].fSensorTemperatureLast) < FLOAT_EPSILON)
             {
                 sanityChecks[i].uUnchangedCounter++;
                 if (sanityChecks[i].uUnchangedCounter >= (SENSOR_GRACE_PERIOD / PERIODIC_INTERVAL))
@@ -103,6 +106,7 @@ void checkSensorSanity(void)
             }
             else
             {
+                sanityChecks[i].uUnchangedCounter = 0U;
                 sanityChecks[i].fSensorTemperatureLast = sCurrentMeasurement.fCurrentValue;
 
                 if (sCurrentMeasurement.fCurrentValue > sanityChecks[i].sSensorLimit.max)
@@ -119,12 +123,10 @@ void checkSensorSanity(void)
                 }
                 else
                 {
-                    sanityChecks[i].uUnchangedCounter = 0U;
                     sanityChecks[i].state = SENSOR_NO_ERROR;
                 }
             }
         }
-        // printf("  state: %u\n", sanityChecks[i].state);
     }
 }
 
@@ -143,7 +145,7 @@ void getSensorSanityStates(sSensorSanityCheck *pSensorSanityChecks)
         {
             // Copy only the needed attributes
             pSensorSanityChecks[i].state = sanityChecks[i].state;
-            strcpy(pSensorSanityChecks[i].name, sanityChecks[i].name);
+            strncpy(pSensorSanityChecks[i].name, sanityChecks[i].name, MAX_ERROR_STRING_SIZE);
         }
         xSemaphoreGiveRecursive(xMutexAccessSafety);
     }

main/safety.h

@@ -3,9 +3,22 @@
 #include "outputs.h"
 #include "inputs.h"
 
+#include "sdkconfig.h"
+
+#include <stdint.h>
+
 #define MAX_ERROR_STRING_SIZE 64U
 #define NUMBER_OF_SENSOR_SANITY_CHECKS 4U
 
+#define SENSOR_LIMIT_CHAMBER_MAX (CONFIG_SENSOR_LIMIT_CHAMBER_MAX / 10.0f)
+#define SENSOR_LIMIT_CHAMBER_MIN (CONFIG_SENSOR_LIMIT_CHAMBER_MIN / 10.0f)
+#define SENSOR_LIMIT_OUTDOOR_MAX (CONFIG_SENSOR_LIMIT_OUTDOOR_MAX / 10.0f)
+#define SENSOR_LIMIT_OUTDOOR_MIN (CONFIG_SENSOR_LIMIT_OUTDOOR_MIN / 10.0f)
+#define SENSOR_LIMIT_INLET_MAX (CONFIG_SENSOR_LIMIT_INLET_MAX / 10.0f)
+#define SENSOR_LIMIT_INLET_MIN (CONFIG_SENSOR_LIMIT_INLET_MIN / 10.0f)
+#define SENSOR_LIMIT_RETURN_MAX (CONFIG_SENSOR_LIMIT_RETURN_MAX / 10.0f)
+#define SENSOR_LIMIT_RETURN_MIN (CONFIG_SENSOR_LIMIT_RETURN_MIN / 10.0f)
+
 typedef enum _SensorErrorState
 {
     SENSOR_NO_ERROR,

main/sntp.c

@@ -1,12 +1,13 @@
-#include <time.h>
-#include <sys/time.h>
-#include <esp_sntp.h>
-#include "esp_log.h"
-
 #include "sntp.h"
 
+#include "esp_sntp.h"
+#include "esp_log.h"
+
+#include <time.h>
+#include <sys/time.h>
+
 static const char *TAG = "smart-oil-heater-control-system-sntp";
-static eSntpState sntpState = SYNC_NOT_STARTED;
+static volatile eSntpState sntpState = SYNC_NOT_STARTED;
 void time_sync_notification_cb(struct timeval *tv);
 
 void initSntp(void)

main/wifi.c

@@ -1,38 +1,50 @@
-#include <string.h>
+#include "wifi.h"
+
 #include "esp_timer.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
+#include "freertos/event_groups.h"
 #include "esp_wifi.h"
 #include "esp_event.h"
-#include "freertos/event_groups.h"
 #include "esp_log.h"
 #include "esp_netif.h"
 #include <lwip/sockets.h>
 
-#include "wifi.h"
+#include <string.h>
 
 #define WIFI_CONNECTED_BIT BIT0
 #define WIFI_FAIL_BIT BIT1
+#define MAX_RETRY_COUNT 10
+#define RETRY_DELAY_MS 1000
 
 static const char *TAG = "smart-oil-heater-control-system-wifi";
 
 static EventGroupHandle_t s_wifi_event_group;
+static int s_retry_num = 0;
+static bool s_initial_connect = true;
+
 static void event_handler(void *arg, esp_event_base_t event_base,
                           int32_t event_id, void *event_data);
 
 void initWifi(void)
 {
     s_wifi_event_group = xEventGroupCreate();
+    if (s_wifi_event_group == NULL)
+    {
+        ESP_LOGE(TAG, "xEventGroupCreate() failed!");
+        return;
+    }
+
     ESP_ERROR_CHECK(esp_netif_init());
     ESP_ERROR_CHECK(esp_event_loop_create_default());
 
     esp_netif_t *my_sta = esp_netif_create_default_wifi_sta();
-    esp_netif_dhcpc_stop(my_sta);
+    ESP_ERROR_CHECK(esp_netif_dhcpc_stop(my_sta));
     esp_netif_ip_info_t ip_info;
     ip_info.ip.addr = ipaddr_addr(CONFIG_STATIC_IP_ADDR);
     ip_info.gw.addr = ipaddr_addr(CONFIG_STATIC_GATEWAY_IP_ADDR);
     ip_info.netmask.addr = ipaddr_addr(CONFIG_STATIC_IP_NETMASK);
-    esp_netif_set_ip_info(my_sta, &ip_info);
+    ESP_ERROR_CHECK(esp_netif_set_ip_info(my_sta, &ip_info));
 
     wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
     ESP_ERROR_CHECK(esp_wifi_init(&cfg));
@@ -84,7 +96,9 @@ void initWifi(void)
     {
         ESP_LOGE(TAG, "Unexpected event");
     }
-    vEventGroupDelete(s_wifi_event_group);
+
+    // Mark initial connection phase complete - do NOT delete the event group
+    s_initial_connect = false;
 }
 
 static void event_handler(void *arg, esp_event_base_t event_base,
@@ -96,13 +110,46 @@ static void event_handler(void *arg, esp_event_base_t event_base,
     }
     else if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED)
     {
+        wifi_event_sta_disconnected_t *event = (wifi_event_sta_disconnected_t *)event_data;
+        ESP_LOGW(TAG, "Disconnected from AP (reason: %d)", event->reason);
+
+        if (s_initial_connect)
+        {
+            // During initial connection phase, use retry limit
+            if (s_retry_num < MAX_RETRY_COUNT)
+            {
+                vTaskDelay(pdMS_TO_TICKS(RETRY_DELAY_MS));
                 esp_wifi_connect();
-        ESP_LOGI(TAG, "Retry to connect to the AP");
+                s_retry_num++;
+                ESP_LOGI(TAG, "Retry to connect to the AP (%d/%d)", s_retry_num, MAX_RETRY_COUNT);
+            }
+            else
+            {
+                xEventGroupSetBits(s_wifi_event_group, WIFI_FAIL_BIT);
+                ESP_LOGE(TAG, "Failed to connect after %d attempts", MAX_RETRY_COUNT);
+            }
+        }
+        else
+        {
+            // After initial connection, always try to reconnect with delay
+            vTaskDelay(pdMS_TO_TICKS(RETRY_DELAY_MS));
+            esp_wifi_connect();
+            ESP_LOGI(TAG, "Attempting to reconnect to the AP...");
+        }
     }
     else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP)
     {
         ip_event_got_ip_t *event = (ip_event_got_ip_t *)event_data;
         ESP_LOGI(TAG, "Got ip:" IPSTR, IP2STR(&event->ip_info.ip));
+        s_retry_num = 0;
+
+        if (s_initial_connect)
+        {
             xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT);
         }
+        else
+        {
+            ESP_LOGI(TAG, "Successfully reconnected to AP");
+        }
+    }
 }