port to ESP32C3

.gitignore

@@ -3,7 +3,6 @@
 # https://github.com/espressif/esp-idf
 
 build/
-sdkconfig
 sdkconfig.old
 
 # ---> VisualStudioCode
@@ -187,7 +186,6 @@ cython_debug/
 # https://github.com/espressif/esp-idf
 
 build/
-sdkconfig
 sdkconfig.old
 
 # ---> CMake
@@ -293,3 +291,4 @@ dkms.conf
 
 .vscode/settings.json
 sdkconfig.defaults
+.clangd

ARCHITECTURE.md

@@ -1,390 +0,0 @@
-# Architecture Documentation
-
-## System Overview
-
-The ESP32 LED Controller is a real-time embedded system designed for model aircraft LED control with the following key components:
-
-```
-┌─────────────────────────────────────────────────────────┐
-│                     Application Layer                    │
-│  ┌──────────┐  ┌───────────┐  ┌──────────────────────┐ │
-│  │  main.c  │  │  Web-BLE  │  │  Animation Patterns  │ │
-│  └────┬─────┘  └─────┬─────┘  └──────────┬───────────┘ │
-└───────┼──────────────┼────────────────────┼─────────────┘
-        │              │                    │
-┌───────┴──────────────┴────────────────────┴─────────────┐
-│                    Control Layer                         │
-│  ┌──────────────────────────────────────────────────┐   │
-│  │  control.c - System Orchestration                │   │
-│  │  - BLE GATT Server                               │   │
-│  │  - NVS Configuration Storage                      │   │
-│  │  - OTA Firmware Update                           │   │
-│  │  - Subsystem Initialization                       │   │
-│  └──────────────────────────────────────────────────┘   │
-└──────────────────────────────────────────────────────────┘
-        │              │                    │
-┌───────┼──────────────┼────────────────────┼─────────────┐
-│       │              │                    │              │
-│  ┌────▼────┐   ┌────▼─────┐        ┌────▼─────────┐   │
-│  │  LED    │   │ RC Signal│        │  Animation   │   │
-│  │ Driver  │   │  Reader  │        │   Engine     │   │
-│  └─────────┘   └──────────┘        └──────────────┘   │
-│                                                          │
-│                    Hardware Layer                        │
-└──────────────────────────────────────────────────────────┘
-        │              │                    │
-┌───────┼──────────────┼────────────────────┼─────────────┐
-│  ┌────▼────┐   ┌────▼─────┐                             │
-│  │  RMT    │   │   GPIO   │                             │
-│  │ (WS2812)│   │  (PWM)   │                             │
-│  └─────────┘   └──────────┘                             │
-│                                                          │
-│                  ESP-IDF HAL & Drivers                   │
-└──────────────────────────────────────────────────────────┘
-```
-
-## Module Details
-
-### 1. main.c - Application Entry Point
-**Responsibilities:**
-- System initialization orchestration
-- Animation task creation and management
-- System health monitoring
-- Error handling and recovery
-
-**Key Functions:**
-- `app_main()`: Entry point, initializes control system
-- `animation_task()`: FreeRTOS task for 60 FPS animation updates
-
-**Task Priority:** Animation task runs at priority 5 (above default)
-
----
-
-### 2. control.c/h - System Control & Orchestration
-**Responsibilities:**
-- BLE GATT server implementation
-- Configuration management (NVS)
-- OTA firmware update handling
-- Subsystem initialization and coordination
-
-**BLE Service Structure:**
-```
-Service UUID: 0x00FF
-├── Config Characteristic (0xFF01)
-│   ├── Read: Get current configuration
-│   └── Write: Update and persist configuration
-├── Mode Characteristic (0xFF02)
-│   ├── Read: Get current animation mode
-│   └── Write: Set animation mode
-├── PWM Emulation (0xFF03)
-│   └── Write: Trigger mode change
-└── OTA Characteristic (0xFF04)
-    └── Write: Stream firmware binary
-```
-
-**Configuration Storage:**
-```c
-typedef struct {
-    int8_t led_pin_strip_a;    // -1 = disabled
-    int8_t led_pin_strip_b;    // -1 = disabled
-    int8_t pwm_pin;            // -1 = disabled
-    ble_timeout_t ble_timeout; // 0, 60, 300 seconds
-    uint32_t magic;            // 0xDEADBEEF validation
-} controller_config_t;
-```
-
-**NVS Namespace:** `led_ctrl`
-**NVS Key:** `config`
-
-**BLE Timeout Logic:**
-- Timer starts at boot
-- Pauses when device connects
-- Resumes when device disconnects
-- Disables BLE advertising on timeout
-
-**OTA Update Flow:**
-1. Client writes firmware data in 512-byte chunks
-2. ESP32 writes to inactive OTA partition
-3. Last chunk (< 512 bytes) triggers completion
-4. Validates partition, sets boot partition
-5. Resets configuration and restarts
-
----
-
-### 3. led.c/h - WS2812B LED Driver
-**Technology:** ESP32 RMT (Remote Control) peripheral
-
-**Why RMT?**
-- Hardware timing generation (no CPU overhead)
-- Precise WS2812B timing requirements:
-  - T0H: 350ns ±150ns
-  - T0L: 900ns ±150ns
-  - T1H: 900ns ±150ns
-  - T1L: 350ns ±150ns
-  - Reset: >280µs
-
-**Implementation:**
-```
-RMT Channel → Custom Encoder → WS2812B Strip
-     ↓              ↓                ↓
-  80 MHz      GRB Encoding      Serial Data
-```
-
-**Color Management:**
-- Internal RGB buffer for each strip
-- Thread-safe access via mutex
-- Hardware converts RGB → GRB for WS2812B
-- Support for HSV → RGB conversion
-
-**Key Functions:**
-- `led_init()`: Configure RMT channels
-- `led_set_pixel_a/b()`: Set individual LED
-- `led_fill_a/b()`: Set all LEDs same color
-- `led_show()`: Update physical LEDs
-- `led_fade_to_black()`: Fade effect for trails
-
-**Memory Usage:**
-- Strip A buffer: num_leds * 3 bytes (RGB)
-- Strip B buffer: num_leds * 3 bytes (RGB)
-- Default: 44 LEDs * 2 strips * 3 = 264 bytes
-
----
-
-### 4. rcsignal.c/h - PWM Signal Reader
-**Technology:** GPIO interrupt + software edge detection
-
-**PWM Signal Specification:**
-- Standard RC PWM: 1000-2000µs pulse width
-- Detection threshold: 1500µs
-- Timeout: 100ms (signal loss detection)
-
-**Mode Change Logic:**
-```
-PWM < 1500µs → Set "pull_detected" flag
-     ↓
-PWM > 1500µs AND pull_detected → Mode++
-     ↓
-pull_detected = false
-```
-
-**Implementation:**
-- ISR captures rising/falling edges
-- Calculates pulse width in microseconds
-- Monitor task (10ms interval) detects mode changes
-- Callback notifies animation system
-
-**Thread Safety:**
-- Volatile variables for ISR communication
-- Monitor task runs at priority 5
-
----
-
-### 5. animation.c/h - Animation Engine
-**Update Rate:** 60 FPS (16.67ms per frame)
-
-**Global State:**
-- `global_hue`: Slow color cycling (updates every 3 frames)
-- `frame_counter`: Frame synchronization
-- `current_mode`: Active animation pattern
-
-**Animation Techniques:**
-
-#### Fade Effects
-```c
-// Smooth trails for chase animations
-led_fade_to_black(amount);
-// Each LED: color = (color * (255 - amount)) / 255
-```
-
-#### Beat Synchronization
-```c
-// Sine wave based on BPM and time
-beatsin16(bpm, min_val, max_val);
-// Returns position oscillating between min and max
-```
-
-#### HSV Color Space
-- Hue: 0-255 (color wheel)
-- Saturation: 0-255 (color intensity)
-- Value: 0-255 (brightness)
-- Automatic RGB conversion
-
-**Animation Modes Breakdown:**
-
-1. **Static Colors** (Black, Red, Blue, Green, White)
-   - Single `led_fill()` call
-   - No per-frame updates needed
-
-2. **Rainbow**
-   - HSV hue gradient across strip
-   - Hue offset per LED: `global_hue + (i * 7)`
-   - Global hue increments for animation
-
-3. **Rainbow Glitter**
-   - Base rainbow + random white sparkles
-   - 80/255 chance per frame
-   - Random LED position
-
-4. **Confetti**
-   - Fade to black (10/255 per frame)
-   - Random position + random hue
-   - Creates "fireworks" effect
-
-5. **Sinelon**
-   - Sweeping dot using sine wave
-   - Position: `beatsin16(13 BPM)`
-   - 20/255 fade creates trails
-
-6. **BPM**
-   - Color palette based on party colors
-   - Beat: `beatsin8(33 BPM)`
-   - Brightness modulation per LED
-
-7. **Navigation**
-   - Fixed positions for aviation lights
-   - Red: LEDs 0-2 (left)
-   - Green: Last 3 LEDs (right)
-   - White blink: 30 Hz (half frame rate)
-
-8. **Chase (Red)**
-   - Red dot with ±2 LED trail
-   - Position: `beatsin16(40 BPM)`
-   - No fade (instant clear)
-
-9. **Chase RGB**
-   - Same as Chase but HSV color cycling
-   - Hue: `global_hue`
-
-10. **Random**
-    - Random LED, random color each frame
-    - Rare full clear event
-
----
-
-## Data Flow
-
-### Configuration Update Flow
-```
-Web Browser → BLE Write → control.c → NVS Save → Restart (if pins changed)
-```
-
-### Animation Update Flow
-```
-animation_task (60Hz) → animation_update() → LED buffer → led_show() → RMT → LEDs
-```
-
-### PWM Mode Change Flow
-```
-RC Signal → GPIO ISR → rcsignal.c → Callback → control.c → animation.c
-```
-
-### OTA Update Flow
-```
-Web Browser → BLE Write (chunks) → control.c → esp_ota → Flash → Restart
-```
-
-## Thread Safety
-
-### Mutexes Used
-1. **led_mutex**: Protects LED buffer access
-   - Used by: animation_update(), led_show()
-   - Type: FreeRTOS mutex
-
-### ISR Safety
-- **rcsignal.c**: Volatile variables for ISR communication
-- **Minimal ISR work**: Only timestamp and edge detection
-- **Deferred processing**: Monitor task handles logic
-
-### Task Priorities
-```
-Priority 5: animation_task, rcsignal_monitor_task
-Priority 1: BLE stack tasks (default)
-Priority 0: Idle task
-```
-
-## Memory Management
-
-### Static Allocation
-- Configuration structure: 11 bytes (NVS)
-- Animation state: ~100 bytes (global variables)
-
-### Dynamic Allocation
-- LED buffers: `num_leds * 3 * 2` bytes (both strips)
-- RMT encoder: ~200 bytes per strip
-- BLE stack: ~30KB (ESP-IDF managed)
-
-### Flash Usage
-- Code: ~500KB (with BLE stack)
-- OTA partitions: 2x 1MB (dual-boot)
-- NVS: 24KB
-- Factory: 1MB
-
-### Heap Usage Estimate
-- Total: ~50KB during operation
-- Available: ~250KB on ESP32
-
-## Power Optimization
-
-### Active Mode
-- CPU: 240 MHz (animation processing)
-- BLE: Active (advertising/connected)
-- Power: ~180mA (ESP32 only)
-
-### BLE Disabled Mode
-- CPU: 240 MHz (animation only)
-- BLE: Disabled after timeout
-- Power: ~100mA (ESP32 only)
-
-### LED Power
-- Per LED: ~60mA at full white
-- 44 LEDs full white: ~2.6A
-- Typical animation: ~500mA average
-
-## ESP32 vs ESP32-C3 Differences
-
-### ESP32 (Xtensa)
-- Dual-core: FreeRTOS symmetric multiprocessing
-- BLE + Classic Bluetooth controller
-- More GPIO pins available
-- Recommended for complex projects
-
-### ESP32-C3 (RISC-V)
-- Single-core: Simpler task management
-- BLE only (no Classic Bluetooth)
-- Fewer GPIO pins
-- Lower cost option
-
-### Compatibility
-- Same codebase works on both
-- Pin numbers differ (check datasheet)
-- RMT peripheral identical
-- BLE functionality identical
-
-## Performance Characteristics
-
-### Latency
-- **PWM detection**: <10ms
-- **BLE command**: <100ms
-- **Mode change**: <20ms (next frame)
-- **LED update**: 16.67ms (60 FPS locked)
-
-### Throughput
-- **LED data**: ~13.44 Mbps theoretical (RMT)
-- **BLE**: ~1 Mbps (limited by MTU)
-- **OTA**: ~40 KB/s (BLE transfer)
-
-### Timing Precision
-- **Animation frame**: ±0.5ms jitter
-- **WS2812B timing**: ±50ns (RMT hardware)
-- **PWM measurement**: ±1µs (ISR timing)
-
----
-
-
-## Future Enhancement Ideas TODO
-
-1. **Dynamic LED Count**: Auto-detect number of LEDs
-2. **Multi-Strip Sync**: Synchronized patterns
-3. **Pattern Editor**: Visual animation designer
-4. **Scheduler**: Time-based mode changes
-

README.md

@@ -1,6 +1,6 @@
 # ESP32 LED Controller for Model Aircraft
 
-Professional LED controller firmware for ESP32 with Web-BLE configuration interface. Designed for model aircraft with WS2812B LED strips.
+Professional LED controller firmware for ESP32. Designed for model aircraft with WS2812B LED strips.
 
 ## Features
 
@@ -26,28 +26,18 @@ Professional LED controller firmware for ESP32 with Web-BLE configuration interf
 13. **Chase (RGB)** - RGB cycling chase effect
 14. **Random** - Random LED colors
 
-### Web-BLE Configuration
-- **Pin Configuration**: Set GPIO pins for LED strips and PWM input
-- **BLE Auto-Off**: Configure timeout (Never/1min/5min)
-- **Manual Control**: Select animation modes from web interface
-- **PWM Emulation**: Test mode switching without RC signal
-- **OTA Firmware Update**: Upload new firmware via Bluetooth
-
 ## Project Structure
 
 ```
 led-controller-firmware/
 ├── main/
 │   ├── main.c           # Application entry point
-│   ├── control.c/h      # BLE, NVS, initialization
+│   ├── control.c/h      # initialization
+│   ├── config.c/h       # NVS
 │   ├── led.c/h          # WS2812B control (RMT driver)
 │   ├── rcsignal.c/h     # PWM signal reading
+│   ├── localbtn.c/h     # Local btn reading
 │   └── animation.c/h    # LED animation patterns
-├── webapp/
-│   ├── index.html       # Web-BLE interface
-│   ├── app/app.js       # BLE communication logic
-│   ├── css/style.css    # UI styling
-│   └── data/favicon.ico
 ├── CMakeLists.txt
 ├── sdkconfig.defaults
 └── partitions.csv       # OTA-enabled partition table
@@ -80,7 +70,7 @@ idf.py build
 idf.py -p /dev/ttyUSB0 flash monitor
 ```
 
-Replace `/dev/ttyUSB0` with your serial port (COM3 on Windows).
+Replace `/dev/ttyUSB0` with your serial port.
 
 ## Hardware Setup
 
@@ -91,6 +81,7 @@ ESP32 Pin    -> Component
 GPIO XX      -> WS2812B Strip A Data
 GPIO XX      -> WS2812B Strip B Data
 GPIO XX      -> RC PWM Signal
+GPIO XX      -> Local button Signal
 GND          -> Common Ground
 5V           -> LED Strip Power (if current < 500mA)
 ```
@@ -107,42 +98,6 @@ GND          -> Common Ground
 - 1500µs threshold for mode switching
 - Rising edge >1500µs after <1500µs triggers next mode
 
-## Web-BLE Configuration
-
-### Access the Interface
-
-1. Open `webapp/index.html` in Chrome, Edge, or Opera (Web Bluetooth required)
-2. Click "Connect via BLE"
-3. Select "LED-Controller" from device list
-4. Configure settings and control LEDs
-
-### Configuration Options
-
-#### Pin Setup
-- **LED Strip A GPIO**: -1 to disable, 0-48 for GPIO pin
-- **LED Strip B GPIO**: -1 to disable, 0-48 for GPIO pin
-- **PWM Input GPIO**: -1 to disable, 0-48 for GPIO pin
-
-#### BLE Timeout
-- **Never**: BLE stays on until manually disabled
-- **1 Minute**: Auto-disable after 1 min of boot (unless connected)
-- **5 Minutes**: Auto-disable after 5 min of boot (unless connected)
-
-#### Firmware Update
-1. Build firmware: `idf.py build`
-2. Find binary: `build/led_controller.bin`
-3. Upload via Web-BLE interface
-4. Device restarts with new firmware (settings reset)
-
-## Default Configuration
-
-On first boot or after reset:
-- All pins: **Not configured** (-1)
-- BLE timeout: **Never**
-- Animation mode: **Black** (off)
-
-Configure via Web-BLE before use.
-
 ## Development
 
 ### Adding New Animations
@@ -150,11 +105,6 @@ Configure via Web-BLE before use.
 1. Add mode to `animation_mode_t` enum in `animation.h`
 2. Implement animation function in `animation.c`
 3. Add case to `animation_update()` switch statement
-4. Update `MODE_NAMES` array in `webapp/app/app.js`
-
-### Modifying LED Count
-
-Edit `DEFAULT_NUM_LEDS_A` and `DEFAULT_NUM_LEDS_B` in `control.c`. TODO
 
 ### Testing
 

functions.ino

@@ -1,212 +0,0 @@
-boolean getRC01() {
-  rc01Val = pulseIn(rc01, HIGH);
-  //Serial.println(rc01Val);
-  if (rc01Val > 1500) {
-    //Serial.println("RC1 ON");
-    return true;
-  } else {
-    //Serial.println("RC1 OFF");
-    return false;
-  }
-}
-
-boolean getRC02() {
-  rc02Val = pulseIn(rc02, HIGH);
-  // Serial.println(rc02Val);
-  if (rc02Val < 1500) {
-    pullRC = true;
-  }
-  if (rc02Val > 1500 && pullRC) {
-    //Serial.println("RC2 ON");
-    pullRC = false;
-    return true;
-  } else {
-    //Serial.println("RC2 OFF");
-    return false;
-  }
-}
-
-void serialPrintModus(int modus) {
-  switch (modus) {
-    case 0:
-      Serial.println("Black");
-      break;
-    case 1:
-      Serial.println("Red");
-      break;
-    case 2:
-      Serial.println("Blue");
-      break;
-    case 3:
-      Serial.println("Green");
-      break;
-    case 4:
-      Serial.println("White");
-      break;
-    case 5:
-      Serial.println("Rainbow");
-      break;
-    case 6:
-      Serial.println("RainbowWithGlitter");
-      break;
-    case 7:
-      Serial.println("Confetti");
-      break;
-    case 8:
-      Serial.println("Sinelon");
-      break;
-    case 9:
-      Serial.println("BPM");
-      break;
-    case 10:
-      Serial.println("Navigation");
-      break;
-    case 11:
-      Serial.println("Chase");
-      break;
-    case 12:
-      Serial.println("ChaseRGB");
-      break;
-      case 13:
-      Serial.println("Random");
-      break;
-  }
-}
-
-void rainbow()
-{
-  Serial.println("Rainbow");
-  // FastLED's built-in rainbow generator
-  fill_rainbow( leds, NUM_LEDS, gHue, 7);
-}
-
-void rainbowWithGlitter()
-{
-  // built-in FastLED rainbow, plus some random sparkly glitter
-  rainbow();
-  addGlitter(255);
-}
-
-void addGlitter( fract8 chanceOfGlitter)
-{
-  if ( random8() < chanceOfGlitter) {
-    leds[ random16(NUM_LEDS) ] += CRGB::White;
-  }
-}
-
-void confetti()
-{
-  // random colored speckles that blink in and fade smoothly
-  fadeToBlackBy( leds, NUM_LEDS, 10);
-  int pos = random16(NUM_LEDS);
-  leds[pos] += CHSV( gHue + random8(64), 200, 255);
-}
-
-void sinelon()
-{
-  // a colored dot sweeping back and forth, with fading trails
-  fadeToBlackBy( leds, NUM_LEDS, 20);
-  int pos = beatsin16(13, 0, NUM_LEDS);
-  leds[pos] += CHSV( gHue, 255, 192);
-}
-
-void bpm()
-{
-  // colored stripes pulsing at a defined Beats-Per-Minute (BPM)
-  uint8_t BeatsPerMinute = 33;
-  CRGBPalette16 palette = PartyColors_p;
-  uint8_t beat = beatsin8( BeatsPerMinute, 64, 255);
-  for ( int i = 0; i < NUM_LEDS; i++) { //9948
-    leds[i] = ColorFromPalette(palette, gHue + (i * 2), beat - gHue + (i * 10));
-  }
-}
-
-void blackMode() {
-  fill_solid(leds, NUM_LEDS, CRGB::Black);                    // Just to be sure, let's really make it BLACK.
-}
-
-void redMode() {
-  fill_solid(leds, NUM_LEDS, CRGB::Red);
-}
-
-void blueMode() {
-  fill_solid(leds, NUM_LEDS, CRGB::Blue);
-}
-
-void greenMode() {
-  fill_solid(leds, NUM_LEDS, CRGB::Green);
-}
-
-void whiteMode() {
-  fill_solid(leds, NUM_LEDS, CRGB::White);
-}
-
-void navigation() {
-  FastLED.clear();
-  leds[0] = CRGB::Red;
-  leds[1] = CRGB::Red;
-  leds[2] = CRGB::Red;
-  leds[41] = CRGB::Green;
-  leds[42] = CRGB::Green;
-  leds[43] = CRGB::Green;
-
-  leds[5] = CRGB::White;
-  leds[6] = CRGB::White;
-  leds[37] = CRGB::White;
-  leds[38] = CRGB::White;
-
-  FastLED.delay(100);
-
-  leds[5] = CRGB::Black;
-  leds[6] = CRGB::Black;
-  leds[37] = CRGB::Black;
-  leds[38] = CRGB::Black;
-}
-
-void chase() {
-  FastLED.clear();
-  // a colored dot sweeping back and forth, with fading trails
-  //fadeToBlackBy( leds, NUM_LEDS, 20);
-  int pos = beatsin16(40, 0, NUM_LEDS);
-  leds[pos] = CRGB::Red;
-  if (pos < 41) {
-    leds[pos + 1] = CRGB::Red;
-    leds[pos + 2] = CRGB::Red;
-  }
-  if (pos > 1) {
-    leds[pos - 1] = CRGB::Red;
-    leds[pos - 2] = CRGB::Red;
-  }
-
-}
-
-void chaseRGB() {
-  FastLED.clear();
-  // a colored dot sweeping back and forth, with fading trails
-  //fadeToBlackBy( leds, NUM_LEDS, 20);
-  int pos = beatsin16(40, 0, NUM_LEDS);
-  leds[pos] += CHSV( gHue, 255, 192);
-  if (pos < 41) {
-    leds[pos + 1] += CHSV( gHue, 255, 192);
-    leds[pos + 2] += CHSV( gHue, 255, 192);
-  }
-  if (pos > 1) {
-    leds[pos - 1] += CHSV( gHue, 255, 192);
-    leds[pos - 2] += CHSV( gHue, 255, 192);
-  }
-  
-}
-
-void randomMode(){
-  randomVal = random(0,45);
-  
-  if(randomVal == 44){
-    if(random(5,11) == 9){
-       FastLED.clear();
-    }
-  }else{
-    leds[randomVal] = random(0, 16777216);
-  }
-  
-}
-

main/CMakeLists.txt

@@ -5,10 +5,7 @@ idf_component_register(
         "led.c"
         "rcsignal.c"
         "animation.c"
+        "localbtn.c"
+        "config.c"
     INCLUDE_DIRS "."
-    EMBED_FILES
-        "../webapp/index.html"
-        "../webapp/app/app.js"
-        "../webapp/css/style.css"
-        "../webapp/data/favicon.ico"
 )

main/animation.c

@@ -5,44 +5,43 @@
 
 #include "animation.h"
 #include "led.h"
+
 #include "esp_log.h"
 #include "esp_timer.h"
 #include "esp_random.h"
+
 #include <math.h>
-#include <string.h>
 
 static const char *TAG = "ANIMATION";
 
 #define FRAMES_PER_SECOND 60
-#define NUM_LEDS_DEFAULT 44 //TODO: Default from proof-of-concept
 
 static animation_mode_t current_mode = ANIM_BLACK;
 static uint8_t global_hue = 0;
 static uint32_t frame_counter = 0;
 
-// Beat calculation helper (similar to FastLED beatsin16)
+// Beat calculation helper
 static int16_t beatsin16(uint8_t bpm, int16_t min_val, int16_t max_val)
 {
-    uint32_t ms = esp_timer_get_time() / 1000;
-    uint32_t beat = (ms * bpm * 256) / 60000;
-    uint8_t beat8 = (beat >> 8) & 0xFF;
+    // Use uint64_t to prevent overflow
+    uint64_t us = esp_timer_get_time(); // Microseconds
 
-    // Sin approximation
-    float angle = (beat8 / 255.0f) * 2.0f * M_PI;
+    // Calculate beat phase (0-65535 repeating at BPM rate)
+    // beats_per_minute → beats_per_microsecond = bpm / 60,000,000
+    uint64_t beat_phase = (us * (uint64_t)bpm * 65536ULL) / 60000000ULL;
+    uint16_t beat16 = (uint16_t)(beat_phase & 0xFFFF);
+
+    // Convert to angle (0 to 2π)
+    float angle = (beat16 / 65535.0f) * 2.0f * M_PI;
     float sin_val = sinf(angle);
 
+    // Map sin (-1 to +1) to output range (min_val to max_val)
     int16_t range = max_val - min_val;
     int16_t result = min_val + (int16_t)((sin_val + 1.0f) * range / 2.0f);
 
     return result;
 }
 
-// Beat calculation helper (beatsin8 variant)
-static uint8_t beatsin8(uint8_t bpm, uint8_t min_val, uint8_t max_val)
-{
-    return (uint8_t)beatsin16(bpm, min_val, max_val);
-}
-
 // Random helper
 static uint8_t random8(void)
 {
@@ -94,20 +93,24 @@ static void anim_white(void)
 
 static void anim_rainbow(void)
 {
-    // FastLED's built-in rainbow generator
+    // Rainbow generator
     uint16_t num_leds_a = led_get_num_leds_a();
     uint16_t num_leds_b = led_get_num_leds_b();
+    uint16_t num_leds = num_leds_a + num_leds_b;
 
-    for (uint16_t i = 0; i < num_leds_a; i++)
+    for (uint16_t i = 0; i < num_leds; i++)
     {
         hsv_t hsv = {(uint8_t)(global_hue + (i * 7)), 255, 255};
-        led_set_pixel_a(i, led_hsv_to_rgb(hsv));
-    }
+        rgb_t color = led_hsv_to_rgb(hsv);
 
-    for (uint16_t i = 0; i < num_leds_b; i++)
-    {
-        hsv_t hsv = {(uint8_t)(global_hue + (i * 7)), 255, 255};
-        led_set_pixel_b(i, led_hsv_to_rgb(hsv));
+        if (i < num_leds_a)
+        {
+            led_set_pixel_a(num_leds_a - i - 1, color);
+        }
+        else
+        {
+            led_set_pixel_b(i - num_leds_a, color);
+        }
     }
 }
 
@@ -133,7 +136,7 @@ static void add_glitter(uint8_t chance_of_glitter)
 static void anim_rainbow_glitter(void)
 {
     anim_rainbow();
-    add_glitter(80);
+    add_glitter(255);
 }
 
 static void anim_confetti(void)
@@ -144,16 +147,16 @@ static void anim_confetti(void)
     uint16_t num_leds = led_get_num_leds_a() + led_get_num_leds_b();
     uint16_t pos = random16(num_leds);
 
-    hsv_t hsv = {(uint8_t)(global_hue + random8()), 200, 255};
+    hsv_t hsv = {(uint8_t)(global_hue + random8()), 255, 255};
     rgb_t color = led_hsv_to_rgb(hsv);
 
     if (pos < led_get_num_leds_a())
     {
-        led_add_pixel_a(pos, color);
+        led_set_pixel_a(led_get_num_leds_a() - pos - 1, color);
     }
     else
     {
-        led_add_pixel_b(pos - led_get_num_leds_a(), color);
+        led_set_pixel_b(pos - led_get_num_leds_a(), color);
     }
 }
 
@@ -163,14 +166,14 @@ static void anim_sinelon(void)
     led_fade_to_black(20);
 
     uint16_t num_leds = led_get_num_leds_a() + led_get_num_leds_b();
-    int16_t pos = beatsin16(13, 0, num_leds - 1);
+    int16_t pos = beatsin16(13, 0, num_leds);
 
     hsv_t hsv = {global_hue, 255, 192};
     rgb_t color = led_hsv_to_rgb(hsv);
 
     if (pos < led_get_num_leds_a())
     {
-        led_add_pixel_a(pos, color);
+        led_add_pixel_a(led_get_num_leds_a() - pos - 1, color);
     }
     else
     {
@@ -178,42 +181,14 @@ static void anim_sinelon(void)
     }
 }
 
-static void anim_bpm(void)
-{
-    // Colored stripes pulsing at 33 BPM
-    uint8_t bpm = 33;
-    uint8_t beat = beatsin8(bpm, 64, 255);
-
-    uint16_t num_leds_a = led_get_num_leds_a();
-    uint16_t num_leds_b = led_get_num_leds_b();
-
-    // PartyColors palette simulation
-    const uint8_t palette_colors[] = {
-        170, 240, 90, 150, 210, 30, 180, 0,
-        210, 270, 150, 240, 330, 60, 300, 120};
-
-    for (uint16_t i = 0; i < num_leds_a; i++)
-    {
-        uint8_t color_index = (global_hue + (i * 2)) & 0x0F;
-        uint8_t brightness = beat - global_hue + (i * 10);
-        hsv_t hsv = {palette_colors[color_index], 255, brightness};
-        led_set_pixel_a(i, led_hsv_to_rgb(hsv));
-    }
-
-    for (uint16_t i = 0; i < num_leds_b; i++)
-    {
-        uint8_t color_index = (global_hue + ((i + num_leds_a) * 2)) & 0x0F;
-        uint8_t brightness = beat - global_hue + ((i + num_leds_a) * 10);
-        hsv_t hsv = {palette_colors[color_index], 255, brightness};
-        led_set_pixel_b(i, led_hsv_to_rgb(hsv));
-    }
-}
-
 static void anim_navigation(void)
 {
-    // Navigation lights: left red, right green, with blinking white
-    static uint8_t blink_state = 0;
+    // Aviation navigation lights with strobe overlay:
+    // - Red: Port (left) wingtip - steady
+    // - Green: Starboard (right) wingtip - steady
+    // - White strobe: Overlays outer nav lights with bright flashes
 
+    static uint8_t strobe_counter = 0;
     led_clear_all();
 
     uint16_t num_leds_a = led_get_num_leds_a();
@@ -223,49 +198,32 @@ static void anim_navigation(void)
     rgb_t green = {0, 255, 0};
     rgb_t white = {255, 255, 255};
 
-    // Left side red (first 3 LEDs of strip A)
+    // Anti-collision strobe pattern: Double flash at ~1 Hz
+    // Flash duration: 3 frames (~50ms) for high-intensity effect
+    bool first_flash = (strobe_counter < 3);
+    bool second_flash = (strobe_counter >= 7 && strobe_counter < 10);
+    bool strobe_active = (first_flash || second_flash);
+
+    // Port (left) - Red navigation light OR white strobe (outer 3 LEDs of strip A)
     if (num_leds_a >= 3)
     {
-        led_set_pixel_a(0, red);
-        led_set_pixel_a(1, red);
-        led_set_pixel_a(2, red);
+        rgb_t color_a = strobe_active ? white : red;
+        led_set_pixel_a(num_leds_a - 1, color_a);
+        led_set_pixel_a(num_leds_a - 2, red);
+        led_set_pixel_a(num_leds_a - 3, red);
     }
 
-    // Right side green (last 3 LEDs)
+    // Starboard (right) - Green navigation light OR white strobe (outer 3 LEDs of strip B)
     if (num_leds_b >= 3)
     {
-        led_set_pixel_b(num_leds_b - 1, green);
+        rgb_t color_b = strobe_active ? white : green;
+        led_set_pixel_b(num_leds_b - 1, color_b);
         led_set_pixel_b(num_leds_b - 2, green);
         led_set_pixel_b(num_leds_b - 3, green);
     }
-    else if (num_leds_a >= 6)
-    {
-        led_set_pixel_a(num_leds_a - 1, green);
-        led_set_pixel_a(num_leds_a - 2, green);
-        led_set_pixel_a(num_leds_a - 3, green);
-    }
 
-    // Blinking white lights (positions 5-6 and 37-38 from original)
-    if (blink_state < FRAMES_PER_SECOND / 2)
-    {
-        if (num_leds_a > 6)
-        {
-            led_set_pixel_a(5, white);
-            led_set_pixel_a(6, white);
-        }
-        if (num_leds_b > 2)
-        {
-            led_set_pixel_b(1, white);
-            led_set_pixel_b(2, white);
-        }
-        else if (num_leds_a > 38)
-        {
-            led_set_pixel_a(37, white);
-            led_set_pixel_a(38, white);
-        }
-    }
-
-    blink_state = (blink_state + 1) % FRAMES_PER_SECOND;
+    // Strobe cycle: 90 frames = 1.5 second at 60 FPS
+    strobe_counter = (strobe_counter + 1) % 90;
 }
 
 static void anim_chase(void)
@@ -273,25 +231,45 @@ static void anim_chase(void)
     // Red dot sweeping with trailing dots
     led_clear_all();
 
-    uint16_t num_leds = led_get_num_leds_a() + led_get_num_leds_b();
-    int16_t pos = beatsin16(40, 0, num_leds - 1);
+    uint16_t num_leds_a = led_get_num_leds_a();
+    uint16_t num_leds_b = led_get_num_leds_b();
+    uint16_t total_leds = num_leds_a + num_leds_b;
+
+    // Get oscillating position across both strips
+    int16_t center_pos = beatsin16(40, 0, total_leds - 1);
 
     rgb_t red = {255, 0, 0};
 
-    // Set main dot and trailing dots
-    for (int offset = -2; offset <= 2; offset++)
+    // Draw center dot with dimmed trailing dots (3 dots total: center ±1)
+    for (int8_t offset = -1; offset <= 1; offset++)
     {
-        int16_t led_pos = pos + offset;
-        if (led_pos >= 0 && led_pos < num_leds)
+        int16_t led_pos = center_pos + offset;
+
+        // Skip if position is out of bounds
+        if (led_pos < 0 || led_pos >= total_leds)
+            continue;
+
+        // Calculate brightness based on distance from center
+        uint8_t brightness = (offset == 0) ? 255 : 32; // Center: full, trailing: 12%
+
+        // Create dimmed color
+        rgb_t dimmed_red = {
+            (red.r * brightness) / 255,
+            (red.g * brightness) / 255,
+            (red.b * brightness) / 255};
+
+        // Map virtual position to physical LED
+        if (led_pos < num_leds_a)
         {
-            if (led_pos < led_get_num_leds_a())
-            {
-                led_set_pixel_a(led_pos, red);
-            }
-            else
-            {
-                led_set_pixel_b(led_pos - led_get_num_leds_a(), red);
-            }
+            // Strip A (mirrored: position 0 maps to last LED)
+            uint16_t strip_a_index = num_leds_a - led_pos - 1;
+            led_set_pixel_a(strip_a_index, dimmed_red);
+        }
+        else
+        {
+            // Strip B (direct mapping)
+            uint16_t strip_b_index = led_pos - num_leds_a;
+            led_set_pixel_b(strip_b_index, dimmed_red);
         }
     }
 }
@@ -301,26 +279,46 @@ static void anim_chase_rgb(void)
     // RGB cycling dot sweeping with trailing dots
     led_clear_all();
 
-    uint16_t num_leds = led_get_num_leds_a() + led_get_num_leds_b();
-    int16_t pos = beatsin16(40, 0, num_leds - 1);
+    uint16_t num_leds_a = led_get_num_leds_a();
+    uint16_t num_leds_b = led_get_num_leds_b();
+    uint16_t total_leds = num_leds_a + num_leds_b;
+
+    // Get oscillating position across both strips
+    int16_t center_pos = beatsin16(40, 0, total_leds - 1);
 
     hsv_t hsv = {global_hue, 255, 192};
     rgb_t color = led_hsv_to_rgb(hsv);
 
-    // Set main dot and trailing dots
-    for (int offset = -2; offset <= 2; offset++)
+    // Draw center dot with dimmed trailing dots (3 dots total: center ±1)
+    for (int8_t offset = -1; offset <= 1; offset++)
     {
-        int16_t led_pos = pos + offset;
-        if (led_pos >= 0 && led_pos < num_leds)
+        int16_t led_pos = center_pos + offset;
+
+        // Skip if position is out of bounds
+        if (led_pos < 0 || led_pos >= total_leds)
+            continue;
+
+        // Calculate brightness based on distance from center
+        uint8_t brightness = (offset == 0) ? 255 : 32; // Center: full, trailing: 12%
+
+        // Create dimmed color
+        rgb_t dimmed_color = {
+            (color.r * brightness) / 255,
+            (color.g * brightness) / 255,
+            (color.b * brightness) / 255};
+
+        // Map virtual position to physical LED
+        if (led_pos < num_leds_a)
         {
-            if (led_pos < led_get_num_leds_a())
-            {
-                led_add_pixel_a(led_pos, color);
-            }
-            else
-            {
-                led_add_pixel_b(led_pos - led_get_num_leds_a(), color);
-            }
+            // Strip A (mirrored: position 0 maps to last LED)
+            uint16_t strip_a_index = num_leds_a - led_pos - 1;
+            led_set_pixel_a(strip_a_index, dimmed_color);
+        }
+        else
+        {
+            // Strip B (direct mapping)
+            uint16_t strip_b_index = led_pos - num_leds_a;
+            led_set_pixel_b(strip_b_index, dimmed_color);
         }
     }
 }
@@ -331,18 +329,26 @@ static void anim_random(void)
     uint16_t num_leds = led_get_num_leds_a() + led_get_num_leds_b();
     uint16_t random_pos = random16(num_leds);
 
-    // Randomly clear all (rare event)
-    if (random_pos == num_leds - 1 && random8() > 200)
-    {
-        led_clear_all();
-        return;
-    }
-
-    // Set random LED to random color
     rgb_t random_color = {
-        random8(),
-        random8(),
-        random8()};
+        0,
+        0,
+        0};
+
+    // Set random LED to random basis color
+    switch (random16(3))
+    {
+    case 0:
+        random_color.r = 255;
+        break;
+    case 1:
+        random_color.g = 255;
+        break;
+    case 2:
+        random_color.b = 255;
+        break;
+    default:
+        break;
+    }
 
     if (random_pos < led_get_num_leds_a())
     {
@@ -357,31 +363,26 @@ static void anim_random(void)
 esp_err_t animation_init(void)
 {
     current_mode = ANIM_BLACK;
-    global_hue = 0;
-    frame_counter = 0;
+    global_hue = 0U;
+    frame_counter = 0U;
 
-    ESP_LOGI(TAG, "Animation system initialized");
+    ESP_LOGI(TAG, "Animation initialized");
     return ESP_OK;
 }
 
 void animation_set_mode(animation_mode_t mode)
 {
-    if (mode >= ANIM_MODE_COUNT)
+    if ((mode >= ANIM_MODE_COUNT) || (mode < 0U))
     {
         mode = ANIM_BLACK;
     }
 
     current_mode = mode;
-    frame_counter = 0;
+    frame_counter = 0U;
 
     ESP_LOGI(TAG, "Animation mode set to: %s", animation_get_mode_name(mode));
 }
 
-animation_mode_t animation_get_mode(void)
-{
-    return current_mode;
-}
-
 void animation_update(void)
 {
     // Update global hue every frame (slowly cycles colors)
@@ -421,9 +422,6 @@ void animation_update(void)
     case ANIM_SINELON:
         anim_sinelon();
         break;
-    case ANIM_BPM:
-        anim_bpm();
-        break;
     case ANIM_NAVIGATION:
         anim_navigation();
         break;
@@ -456,7 +454,6 @@ const char *animation_get_mode_name(animation_mode_t mode)
         "Rainbow with Glitter",
         "Confetti",
         "Sinelon",
-        "BPM",
         "Navigation",
         "Chase",
         "Chase RGB",

main/animation.h

@@ -6,9 +6,10 @@
 #ifndef ANIMATION_H
 #define ANIMATION_H
 
-#include <stdint.h>
 #include "esp_err.h"
 
+#include <stdint.h>
+
 /**
  * @brief Animation modes
  */
@@ -22,11 +23,10 @@ typedef enum {
     ANIM_RAINBOW_GLITTER = 6, // Rainbow with glitter
     ANIM_CONFETTI = 7,        // Random colored speckles
     ANIM_SINELON = 8,         // Colored dot sweeping (RGB cycling)
-    ANIM_BPM = 9,             // Colored stripes @ 33 BPM
-    ANIM_NAVIGATION = 10,     // Navigation lights (red left, green right)
-    ANIM_CHASE = 11,          // Red dot sweeping
-    ANIM_CHASE_RGB = 12,      // RGB cycling dot sweeping
-    ANIM_RANDOM = 13,         // Random mode
+    ANIM_NAVIGATION = 9,     // Navigation lights (red left, green right)
+    ANIM_CHASE = 10,          // Red dot sweeping
+    ANIM_CHASE_RGB = 11,      // RGB cycling dot sweeping
+    ANIM_RANDOM = 12,         // Random mode
     ANIM_MODE_COUNT
 } animation_mode_t;
 
@@ -42,12 +42,6 @@ esp_err_t animation_init(void);
  */
 void animation_set_mode(animation_mode_t mode);
 
-/**
- * @brief Get current animation mode
- * @return Current mode
- */
-animation_mode_t animation_get_mode(void);
-
 /**
  * @brief Update animation (call periodically, e.g., 30-60 FPS)
  */
@@ -58,6 +52,6 @@ void animation_update(void);
  * @param mode Animation mode
  * @return Mode name string
  */
-const char* animation_get_mode_name(animation_mode_t mode);
+const char *animation_get_mode_name(animation_mode_t mode);
 
 #endif // ANIMATION_H

main/config.c

@@ -0,0 +1,199 @@
+/**
+ * @file config.c
+ * @brief Config module implementation
+ */
+
+#include "config.h"
+
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "esp_log.h"
+#include "esp_system.h"
+#include "nvs_flash.h"
+#include "nvs.h"
+#include "soc/gpio_num.h"
+#include "mbedtls/sha256.h"
+
+#include <string.h>
+
+static const char *TAG = "CONFIG";
+
+#define NVS_NAMESPACE "led_ctrl"
+
+#define HARDCODED_CONFIG
+#ifdef HARDCODED_CONFIG
+#define HARDCODED_CONFIG_LED_STRIP_A_PIN 3U
+#define HARDCODED_CONFIG_LED_STRIP_B_PIN 2U
+#define HARDCODED_CONFIG_LED_STRIP_A_COUNT 10U
+#define HARDCODED_CONFIG_LED_STRIP_B_COUNT 10U
+#define HARDCODED_CONFIG_PWM_PIN 1U
+
+#if defined(CONFIG_IDF_TARGET_ESP32C3)
+    #define HARDCODED_CONFIG_LOCALBTN_PIN 9
+#elif defined(CONFIG_IDF_TARGET_ESP32)
+    #define HARDCODED_CONFIG_LOCALBTN_PIN 0
+#else
+    #error "Unsupported target: BOOT button GPIO not defined"
+#endif
+
+#endif
+
+// Global state
+static config_t current_config = {
+    .led_pin_strip_a = -1,
+    .led_pin_strip_b = -1,
+    .led_count_strip_a = -1,
+    .led_count_strip_b = -1,
+    .pwm_pin = -1,
+    .localBtn_pin = -1};
+
+static void calculate_config_hash(const config_t *cfg, uint8_t *out_hash);
+
+// NVS Functions
+static esp_err_t load_config_from_nvs(void)
+{
+    nvs_handle_t nvs_handle;
+    size_t size = sizeof(config_t);
+    config_t tmp;
+
+    for (uint8_t i = 0; i < 2U; i++)
+    {
+        esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READONLY, &nvs_handle);
+        if (err != ESP_OK)
+        {
+            ESP_LOGW(TAG, "NVS not found, using defaults");
+            config_reset_config();
+            continue;
+        }
+
+        err = nvs_get_blob(nvs_handle, "config", &tmp, &size);
+        nvs_close(nvs_handle);
+
+        uint8_t calc_hash[CONFIG_HASH_LEN];
+        calculate_config_hash(&tmp, calc_hash);
+
+        if (memcmp(calc_hash, tmp.hash, CONFIG_HASH_LEN) != 0)
+        {
+            ESP_LOGW(TAG, "Invalid config in NVS, using defaults");
+            config_reset_config();
+            continue;
+        }
+
+        // We found a valid config
+        break;
+    }
+    
+    ESP_LOGI(TAG, "Loaded config from NVS");
+    ESP_LOGI(TAG, "  Strip A: GPIO%d", current_config.led_pin_strip_a);
+    ESP_LOGI(TAG, "  Strip B: GPIO%d", current_config.led_pin_strip_b);
+    ESP_LOGI(TAG, "  Strip A LED count: %d", current_config.led_count_strip_a);
+    ESP_LOGI(TAG, "  Strip B LED count: %d", current_config.led_count_strip_b);
+    ESP_LOGI(TAG, "  PWM Pin: GPIO%d", current_config.pwm_pin);
+    ESP_LOGI(TAG, "  Local btn Pin: GPIO%d", current_config.localBtn_pin);
+
+    return ESP_OK;
+}
+
+static esp_err_t save_config_to_nvs(void)
+{
+    calculate_config_hash(&current_config, current_config.hash);
+
+    nvs_handle_t nvs_handle;
+    esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READWRITE, &nvs_handle);
+    if (err != ESP_OK)
+    {
+        return err;
+    }
+
+    err = nvs_set_blob(nvs_handle, "config", &current_config, sizeof(config_t));
+    if (err == ESP_OK)
+    {
+        err = nvs_commit(nvs_handle);
+    }
+
+    nvs_close(nvs_handle);
+
+    if (err == ESP_OK)
+    {
+        ESP_LOGI(TAG, "Config saved to NVS");
+    }
+    else
+    {
+        ESP_LOGE(TAG, "Failed to save config: %s", esp_err_to_name(err));
+    }
+
+    return err;
+}
+
+esp_err_t config_reset_config(void)
+{
+    current_config.led_pin_strip_a = -1;
+    current_config.led_pin_strip_b = -1;
+    current_config.led_count_strip_a = -1;
+    current_config.led_count_strip_b = -1;
+    current_config.pwm_pin = -1;
+    current_config.localBtn_pin = -1;
+
+    return save_config_to_nvs();
+}
+
+void config_get_config(config_t *const cnf)
+{
+    cnf->led_pin_strip_a = current_config.led_pin_strip_a;
+    cnf->led_pin_strip_b = current_config.led_pin_strip_b;
+    cnf->led_count_strip_a = current_config.led_count_strip_a;
+    cnf->led_count_strip_b = current_config.led_count_strip_b;
+    cnf->pwm_pin = current_config.pwm_pin;
+    cnf->localBtn_pin = current_config.localBtn_pin;
+}
+
+esp_err_t config_init(void)
+{
+    esp_err_t ret;
+
+    ESP_LOGI(TAG, "Initializing Config...");
+
+    // Initialize NVS
+    ret = nvs_flash_init();
+    if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND)
+    {
+        ESP_ERROR_CHECK(nvs_flash_erase());
+        ret = nvs_flash_init();
+        ESP_ERROR_CHECK(config_reset_config());
+    }
+    ESP_ERROR_CHECK(ret);
+
+#ifdef HARDCODED_CONFIG
+    current_config.led_pin_strip_a = HARDCODED_CONFIG_LED_STRIP_A_PIN;
+    current_config.led_pin_strip_b = HARDCODED_CONFIG_LED_STRIP_B_PIN;
+    current_config.led_count_strip_a = HARDCODED_CONFIG_LED_STRIP_A_COUNT;
+    current_config.led_count_strip_b = HARDCODED_CONFIG_LED_STRIP_B_COUNT;
+    current_config.pwm_pin = HARDCODED_CONFIG_PWM_PIN;
+    current_config.localBtn_pin = HARDCODED_CONFIG_LOCALBTN_PIN;
+
+    save_config_to_nvs();
+#endif
+
+    // Load configuration
+    load_config_from_nvs();
+
+    ESP_LOGI(TAG, "Config initialized successfully");
+
+    return ESP_OK;
+}
+
+static void calculate_config_hash(const config_t *cfg, uint8_t *out_hash)
+{
+    mbedtls_sha256_context ctx;
+
+    mbedtls_sha256_init(&ctx);
+    mbedtls_sha256_starts(&ctx, 0); // 0 = SHA-256, 1 = SHA-224
+
+    mbedtls_sha256_update(
+        &ctx,
+        (const unsigned char *)cfg,
+        offsetof(config_t, hash));
+
+    mbedtls_sha256_finish(&ctx, out_hash);
+    mbedtls_sha256_free(&ctx);
+}

main/config.h

@@ -0,0 +1,48 @@
+/**
+ * @file config.h
+ * @brief Config module for LED controller - handles read and store of persistent data
+ */
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "esp_err.h"
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#define CONFIG_HASH_LEN 32 // SHA256
+/**
+ * @brief Configuration structure stored in NVS
+ */
+typedef struct
+{
+    int8_t led_pin_strip_a;        // GPIO pin for LED strip A (-1 = not configured)
+    int8_t led_pin_strip_b;        // GPIO pin for LED strip B (-1 = not configured)
+    int8_t led_count_strip_a;      // LED count for LED strip A (-1 = not configured)
+    int8_t led_count_strip_b;      // LED count for LED strip B (-1 = not configured)
+    int8_t pwm_pin;                // GPIO pin for PWM input (-1 = not configured)
+    int8_t localBtn_pin;           // GPIO pin for local btn input (-1 = not configured)
+    uint8_t hash[CONFIG_HASH_LEN]; // SHA256 Hash of config
+} config_t;
+
+/**
+ * @brief Initialize the config system
+ * Loads configuration from NVS
+ * @return ESP_OK on success
+ */
+esp_err_t config_init(void);
+
+/**
+ * @brief Get current configuration
+ * @param Pointer to current configuration (read-only)
+ */
+void config_get_config(config_t *const cnf);
+
+/**
+ * @brief Reset configuration to defaults
+ * @return ESP_OK on success
+ */
+esp_err_t config_reset_config(void);
+
+#endif // CONFIG_H

main/control.c

@@ -1,263 +1,27 @@
 /**
  * @file control.c
- * @brief Control module implementation with BLE, NVS, and OTA
+ * @brief Control module implementation
  */
 
 #include "control.h"
+#include "config.h"
 #include "led.h"
 #include "rcsignal.h"
+#include "localbtn.h"
 #include "animation.h"
 
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
 #include "esp_log.h"
-#include "esp_system.h"
-#include "nvs_flash.h"
-#include "nvs.h"
-#include "esp_timer.h"
-#include "esp_ota_ops.h"
-#include "esp_http_server.h"
-
-#include "esp_bt.h"
-#include "esp_gap_ble_api.h"
-#include "esp_gatts_api.h"
-#include "esp_bt_main.h"
-#include "esp_gatt_common_api.h"
-
-#include <string.h>
 
 static const char *TAG = "CONTROL";
-
-#define NVS_NAMESPACE "led_ctrl"
-#define CONFIG_MAGIC 0xDEADBEEF
-#define DEFAULT_NUM_LEDS_A 44
-#define DEFAULT_NUM_LEDS_B 44
-
-// BLE Configuration
-#define GATTS_SERVICE_UUID 0x00FF
-#define GATTS_CHAR_UUID_CONFIG 0xFF01
-#define GATTS_CHAR_UUID_MODE 0xFF02
-#define GATTS_CHAR_UUID_PWM 0xFF03
-#define GATTS_CHAR_UUID_OTA 0xFF04
-#define GATTS_NUM_HANDLE_TEST 8
-
-#define DEVICE_NAME "LED-Controller"
-#define ADV_CONFIG_FLAG (1 << 0)
-#define SCAN_RSP_CONFIG_FLAG (1 << 1)
-
-// Global state
-static controller_config_t current_config = {
-    .led_pin_strip_a = -1,
-    .led_pin_strip_b = -1,
-    .pwm_pin = -1,
-    .ble_timeout = BLE_TIMEOUT_NEVER,
-    .magic = CONFIG_MAGIC};
-
-static bool ble_enabled = true;
 static uint8_t current_animation_mode = 0;
-static esp_timer_handle_t ble_timeout_timer = NULL;
-static bool ble_connected = false;
-
-// OTA state
-static const esp_partition_t *update_partition = NULL;
-static esp_ota_handle_t update_handle = 0;
-static size_t ota_bytes_written = 0;
-
-// BLE variables
-static uint8_t adv_config_done = 0;
-static uint16_t gatts_if_global = ESP_GATT_IF_NONE;
-static uint16_t conn_id_global = 0;
-static uint16_t service_handle = 0;
-
-// BLE advertising parameters
-static esp_ble_adv_params_t adv_params = {
-    .adv_int_min = 0x20,
-    .adv_int_max = 0x40,
-    .adv_type = ADV_TYPE_IND,
-    .own_addr_type = BLE_ADDR_TYPE_PUBLIC,
-    .channel_map = ADV_CHNL_ALL,
-    .adv_filter_policy = ADV_FILTER_ALLOW_SCAN_ANY_CON_ANY,
-};
-
-// Characteristic handles
-static struct
-{
-    uint16_t config_handle;
-    uint16_t mode_handle;
-    uint16_t pwm_handle;
-    uint16_t ota_handle;
-} char_handles = {0};
-
-// Forward declarations
-static void ble_timeout_callback(void *arg);
-static void on_mode_change(uint8_t new_mode);
-
-// NVS Functions
-static esp_err_t load_config_from_nvs(void)
-{
-    nvs_handle_t nvs_handle;
-    esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READONLY, &nvs_handle);
-    if (err != ESP_OK)
-    {
-        ESP_LOGW(TAG, "NVS not found, using defaults");
-        return ESP_ERR_NOT_FOUND;
-    }
-
-    size_t required_size = sizeof(controller_config_t);
-    err = nvs_get_blob(nvs_handle, "config", &current_config, &required_size);
-    nvs_close(nvs_handle);
-
-    if (err != ESP_OK || current_config.magic != CONFIG_MAGIC)
-    {
-        ESP_LOGW(TAG, "Invalid config in NVS, using defaults");
-        return ESP_ERR_INVALID_STATE;
-    }
-
-    ESP_LOGI(TAG, "Loaded config from NVS");
-    ESP_LOGI(TAG, "  Strip A: GPIO%d", current_config.led_pin_strip_a);
-    ESP_LOGI(TAG, "  Strip B: GPIO%d", current_config.led_pin_strip_b);
-    ESP_LOGI(TAG, "  PWM Pin: GPIO%d", current_config.pwm_pin);
-    ESP_LOGI(TAG, "  BLE Timeout: %d", current_config.ble_timeout);
-
-    return ESP_OK;
-}
-
-static esp_err_t save_config_to_nvs(void)
-{
-    nvs_handle_t nvs_handle;
-    esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READWRITE, &nvs_handle);
-    if (err != ESP_OK)
-    {
-        return err;
-    }
-
-    current_config.magic = CONFIG_MAGIC;
-    err = nvs_set_blob(nvs_handle, "config", &current_config, sizeof(controller_config_t));
-    if (err == ESP_OK)
-    {
-        err = nvs_commit(nvs_handle);
-    }
-
-    nvs_close(nvs_handle);
-
-    if (err == ESP_OK)
-    {
-        ESP_LOGI(TAG, "Config saved to NVS");
-    }
-    else
-    {
-        ESP_LOGE(TAG, "Failed to save config: %s", esp_err_to_name(err));
-    }
-
-    return err;
-}
-
-esp_err_t control_reset_config(void)
-{
-    current_config.led_pin_strip_a = -1;
-    current_config.led_pin_strip_b = -1;
-    current_config.pwm_pin = -1;
-    current_config.ble_timeout = BLE_TIMEOUT_NEVER;
-    current_config.magic = CONFIG_MAGIC;
-
-    return save_config_to_nvs();
-}
-
-const controller_config_t *control_get_config(void)
-{
-    return &current_config;
-}
-
-esp_err_t control_update_config(const controller_config_t *config)
-{
-    if (!config)
-    {
-        return ESP_ERR_INVALID_ARG;
-    }
-
-    // Reinitialize if pins changed
-    bool pins_changed = (current_config.led_pin_strip_a != config->led_pin_strip_a) ||
-                        (current_config.led_pin_strip_b != config->led_pin_strip_b) ||
-                        (current_config.pwm_pin != config->pwm_pin);
-
-    memcpy(&current_config, config, sizeof(controller_config_t));
-    esp_err_t err = save_config_to_nvs();
-
-    if (err == ESP_OK && pins_changed)
-    {
-        ESP_LOGI(TAG, "Restarting to apply new pin configuration...");
-        vTaskDelay(pdMS_TO_TICKS(1000));
-        esp_restart();
-    }
-
-    return err;
-}
-
-// BLE timeout handling
-static void ble_timeout_callback(void *arg)
-{
-    if (!ble_connected)
-    {
-        ESP_LOGI(TAG, "BLE timeout reached, disabling BLE");
-        control_disable_ble();
-    }
-}
-
-static void start_ble_timeout(void)
-{
-    if (current_config.ble_timeout == BLE_TIMEOUT_NEVER)
-    {
-        return;
-    }
-
-    if (ble_timeout_timer == NULL)
-    {
-        esp_timer_create_args_t timer_args = {
-            .callback = ble_timeout_callback,
-            .name = "ble_timeout"};
-        esp_timer_create(&timer_args, &ble_timeout_timer);
-    }
-
-    esp_timer_stop(ble_timeout_timer);
-    esp_timer_start_once(ble_timeout_timer, (uint64_t)current_config.ble_timeout * 1000000ULL);
-    ESP_LOGI(TAG, "BLE timeout started: %d seconds", current_config.ble_timeout);
-}
-
-void control_disable_ble(void)
-{
-    if (!ble_enabled)
-        return;
-
-    ble_enabled = false;
-
-    if (ble_timeout_timer)
-    {
-        esp_timer_stop(ble_timeout_timer);
-    }
-
-    // Stop BLE advertising
-    esp_ble_gap_stop_advertising();
-
-    ESP_LOGI(TAG, "BLE disabled");
-}
-
-bool control_is_ble_enabled(void)
-{
-    return ble_enabled;
-}
 
 // Animation mode change callback
-static void on_mode_change(uint8_t new_mode)
+static void on_mode_change()
 {
-    current_animation_mode = new_mode;
-    animation_set_mode((animation_mode_t)new_mode);
-}
-
-void control_set_animation_mode(uint8_t mode)
-{
-    if (mode >= ANIM_MODE_COUNT)
-    {
-        mode = 0;
-    }
-    on_mode_change(mode);
+    current_animation_mode = (current_animation_mode + 1) % ANIM_MODE_COUNT;
+    animation_set_mode((animation_mode_t)current_animation_mode);
 }
 
 uint8_t control_get_animation_mode(void)
@@ -265,366 +29,6 @@ uint8_t control_get_animation_mode(void)
     return current_animation_mode;
 }
 
-void control_emulate_pwm_pulse(void)
-{
-    rcsignal_trigger_mode_change();
-}
-
-// Embedded web files (will be linked)
-extern const uint8_t index_html_start[] asm("_binary_index_html_start");
-extern const uint8_t index_html_end[] asm("_binary_index_html_end");
-extern const uint8_t app_js_start[] asm("_binary_app_js_start");
-extern const uint8_t app_js_end[] asm("_binary_app_js_end");
-extern const uint8_t style_css_start[] asm("_binary_style_css_start");
-extern const uint8_t style_css_end[] asm("_binary_style_css_end");
-extern const uint8_t favicon_ico_start[] asm("_binary_favicon_ico_start");
-extern const uint8_t favicon_ico_end[] asm("_binary_favicon_ico_end");
-
-// BLE GAP event handler
-static void gap_event_handler(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param)
-{
-    ESP_LOGI(TAG, "gap_event_handler() event: %i\n", event);
-    switch (event)
-    {
-    case ESP_GAP_BLE_ADV_DATA_SET_COMPLETE_EVT:
-        adv_config_done &= (~ADV_CONFIG_FLAG);
-        if (adv_config_done == 0)
-        {
-            esp_ble_gap_start_advertising(&adv_params);
-        }
-        break;
-
-    case ESP_GAP_BLE_SCAN_RSP_DATA_SET_COMPLETE_EVT:
-        adv_config_done &= (~SCAN_RSP_CONFIG_FLAG);
-        if (adv_config_done == 0)
-        {
-            esp_ble_gap_start_advertising(&adv_params);
-        }
-        break;
-
-    case ESP_GAP_BLE_ADV_START_COMPLETE_EVT:
-        if (param->adv_start_cmpl.status == ESP_BT_STATUS_SUCCESS)
-        {
-            ESP_LOGI(TAG, "BLE advertising started");
-        }
-        break;
-
-    default:
-        break;
-    }
-}
-
-// BLE GATTS event handler
-static void gatts_event_handler(esp_gatts_cb_event_t event, esp_gatt_if_t gatts_if, esp_ble_gatts_cb_param_t *param)
-{
-    switch (event)
-    {
-    case ESP_GATTS_REG_EVT:
-        ESP_LOGI(TAG, "GATTS register, status %d, app_id %d", param->reg.status, param->reg.app_id);
-        gatts_if_global = gatts_if;
-
-        // Set device name
-        esp_ble_gap_set_device_name(DEVICE_NAME);
-
-        // Config advertising data
-        esp_ble_adv_data_t adv_data = {
-            .set_scan_rsp = false,
-            .include_name = true,
-            .include_txpower = true,
-            .min_interval = 0x0006,
-            .max_interval = 0x0010,
-            .appearance = 0x00,
-            .manufacturer_len = 0,
-            .p_manufacturer_data = NULL,
-            .service_data_len = 0,
-            .p_service_data = NULL,
-            .service_uuid_len = sizeof(uint16_t),
-            .p_service_uuid = (uint8_t[]){GATTS_SERVICE_UUID & 0xFF, (GATTS_SERVICE_UUID >> 8) & 0xFF},
-            .flag = (ESP_BLE_ADV_FLAG_GEN_DISC | ESP_BLE_ADV_FLAG_BREDR_NOT_SPT),
-        };
-        esp_ble_gap_config_adv_data(&adv_data);
-        adv_config_done |= ADV_CONFIG_FLAG;
-
-        // Create service
-        esp_gatt_srvc_id_t service_id = {
-            .is_primary = true,
-            .id.inst_id = 0,
-            .id.uuid.len = ESP_UUID_LEN_16,
-            .id.uuid.uuid.uuid16 = GATTS_SERVICE_UUID,
-        };
-        esp_ble_gatts_create_service(gatts_if, &service_id, GATTS_NUM_HANDLE_TEST);
-        break;
-
-    case ESP_GATTS_CREATE_EVT:
-        ESP_LOGI(TAG, "CREATE_SERVICE_EVT, status %d, service_handle %d", param->create.status, param->create.service_handle);
-        service_handle = param->create.service_handle;
-
-        esp_ble_gatts_start_service(service_handle);
-
-        // Add characteristics
-        esp_bt_uuid_t char_uuid;
-        char_uuid.len = ESP_UUID_LEN_16;
-
-        // Config characteristic
-        char_uuid.uuid.uuid16 = GATTS_CHAR_UUID_CONFIG;
-        esp_ble_gatts_add_char(service_handle, &char_uuid,
-                               ESP_GATT_PERM_READ | ESP_GATT_PERM_WRITE,
-                               ESP_GATT_CHAR_PROP_BIT_READ | ESP_GATT_CHAR_PROP_BIT_WRITE,
-                               NULL, NULL);
-
-        // Mode characteristic
-        char_uuid.uuid.uuid16 = GATTS_CHAR_UUID_MODE;
-        esp_ble_gatts_add_char(service_handle, &char_uuid,
-                               ESP_GATT_PERM_READ | ESP_GATT_PERM_WRITE,
-                               ESP_GATT_CHAR_PROP_BIT_READ | ESP_GATT_CHAR_PROP_BIT_WRITE | ESP_GATT_CHAR_PROP_BIT_NOTIFY,
-                               NULL, NULL);
-
-        // PWM emulation characteristic
-        char_uuid.uuid.uuid16 = GATTS_CHAR_UUID_PWM;
-        esp_ble_gatts_add_char(service_handle, &char_uuid,
-                               ESP_GATT_PERM_WRITE,
-                               ESP_GATT_CHAR_PROP_BIT_WRITE,
-                               NULL, NULL);
-
-        // OTA characteristic
-        char_uuid.uuid.uuid16 = GATTS_CHAR_UUID_OTA;
-        esp_ble_gatts_add_char(service_handle, &char_uuid,
-                               ESP_GATT_PERM_WRITE,
-                               ESP_GATT_CHAR_PROP_BIT_WRITE,
-                               NULL, NULL);
-        break;
-
-    case ESP_GATTS_ADD_CHAR_EVT:
-        ESP_LOGI(TAG, "ADD_CHAR_EVT, status %d, char_handle %d", param->add_char.status, param->add_char.attr_handle);
-
-        // Store handles
-        if (param->add_char.char_uuid.uuid.uuid16 == GATTS_CHAR_UUID_CONFIG)
-        {
-            char_handles.config_handle = param->add_char.attr_handle;
-        }
-        else if (param->add_char.char_uuid.uuid.uuid16 == GATTS_CHAR_UUID_MODE)
-        {
-            char_handles.mode_handle = param->add_char.attr_handle;
-        }
-        else if (param->add_char.char_uuid.uuid.uuid16 == GATTS_CHAR_UUID_PWM)
-        {
-            char_handles.pwm_handle = param->add_char.attr_handle;
-        }
-        else if (param->add_char.char_uuid.uuid.uuid16 == GATTS_CHAR_UUID_OTA)
-        {
-            char_handles.ota_handle = param->add_char.attr_handle;
-        }
-        break;
-
-    case ESP_GATTS_CONNECT_EVT:
-        ESP_LOGI(TAG, "BLE device connected");
-        conn_id_global = param->connect.conn_id;
-        ble_connected = true;
-
-        // Stop timeout timer when connected
-        if (ble_timeout_timer)
-        {
-            esp_timer_stop(ble_timeout_timer);
-        }
-        break;
-
-    case ESP_GATTS_DISCONNECT_EVT:
-        ESP_LOGI(TAG, "BLE device disconnected");
-        ble_connected = false;
-
-        // Restart advertising and timeout
-        if (ble_enabled)
-        {
-            esp_ble_gap_start_advertising(&adv_params);
-            start_ble_timeout();
-        }
-        break;
-
-    case ESP_GATTS_READ_EVT:
-        ESP_LOGI(TAG, "GATTS_READ_EVT, handle %d", param->read.handle);
-
-        esp_gatt_rsp_t rsp;
-        memset(&rsp, 0, sizeof(esp_gatt_rsp_t));
-        rsp.attr_value.handle = param->read.handle;
-
-        if (param->read.handle == char_handles.config_handle)
-        {
-            rsp.attr_value.len = sizeof(controller_config_t);
-            memcpy(rsp.attr_value.value, &current_config, sizeof(controller_config_t));
-        }
-        else if (param->read.handle == char_handles.mode_handle)
-        {
-            rsp.attr_value.len = 1;
-            rsp.attr_value.value[0] = current_animation_mode;
-        }
-
-        esp_ble_gatts_send_response(gatts_if, param->read.conn_id, param->read.trans_id,
-                                    ESP_GATT_OK, &rsp);
-        break;
-
-    case ESP_GATTS_WRITE_EVT:
-        ESP_LOGI(TAG, "GATTS_WRITE_EVT, handle %d, len %d", param->write.handle, param->write.len);
-
-        if (param->write.handle == char_handles.config_handle)
-        {
-            // Update configuration
-            if (param->write.len == sizeof(controller_config_t))
-            {
-                controller_config_t new_config;
-                memcpy(&new_config, param->write.value, sizeof(controller_config_t));
-                control_update_config(&new_config);
-            }
-        }
-        else if (param->write.handle == char_handles.mode_handle)
-        {
-            // Set animation mode
-            if (param->write.len == 1)
-            {
-                control_set_animation_mode(param->write.value[0]);
-            }
-        }
-        else if (param->write.handle == char_handles.pwm_handle)
-        {
-            // Emulate PWM pulse
-            control_emulate_pwm_pulse();
-        }
-        else if (param->write.handle == char_handles.ota_handle)
-        {
-            // Handle OTA data
-            if (ota_bytes_written == 0)
-            {
-                // First packet - start OTA
-                ESP_LOGI(TAG, "Starting OTA update...");
-                update_partition = esp_ota_get_next_update_partition(NULL);
-                if (update_partition == NULL)
-                {
-                    ESP_LOGE(TAG, "No OTA partition found");
-                    break;
-                }
-
-                esp_err_t err = esp_ota_begin(update_partition, OTA_SIZE_UNKNOWN, &update_handle);
-                if (err != ESP_OK)
-                {
-                    ESP_LOGE(TAG, "OTA begin failed: %s", esp_err_to_name(err));
-                    break;
-                }
-            }
-
-            // Write OTA data
-            esp_err_t err = esp_ota_write(update_handle, param->write.value, param->write.len);
-            if (err != ESP_OK)
-            {
-                ESP_LOGE(TAG, "OTA write failed: %s", esp_err_to_name(err));
-                esp_ota_abort(update_handle);
-                ota_bytes_written = 0;
-                break;
-            }
-
-            ota_bytes_written += param->write.len;
-            ESP_LOGI(TAG, "OTA progress: %d bytes", ota_bytes_written);
-
-            // Check if this is the last packet (indicated by packet size < MTU)
-            if (param->write.len < 512)
-            {
-                ESP_LOGI(TAG, "OTA complete, total bytes: %d", ota_bytes_written);
-
-                err = esp_ota_end(update_handle);
-                if (err != ESP_OK)
-                {
-                    ESP_LOGE(TAG, "OTA end failed: %s", esp_err_to_name(err));
-                    break;
-                }
-
-                err = esp_ota_set_boot_partition(update_partition);
-                if (err != ESP_OK)
-                {
-                    ESP_LOGE(TAG, "OTA set boot partition failed: %s", esp_err_to_name(err));
-                    break;
-                }
-
-                // Reset configuration
-                control_reset_config();
-
-                ESP_LOGI(TAG, "OTA successful, restarting...");
-                vTaskDelay(pdMS_TO_TICKS(1000));
-                esp_restart();
-            }
-        }
-
-        if (!param->write.is_prep)
-        {
-            esp_ble_gatts_send_response(gatts_if, param->write.conn_id, param->write.trans_id,
-                                        ESP_GATT_OK, NULL);
-        }
-        break;
-
-    default:
-        break;
-    }
-}
-
-// Initialize BLE
-static esp_err_t init_ble(void)
-{
-    if (!ble_enabled)
-    {
-        ESP_LOGI(TAG, "BLE disabled by configuration");
-        return ESP_OK;
-    }
-
-    esp_err_t ret;
-
-    // Initialize BT controller
-    esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
-    ret = esp_bt_controller_init(&bt_cfg);
-    if (ret)
-    {
-        ESP_LOGE(TAG, "BT controller init failed: %s", esp_err_to_name(ret));
-        return ret;
-    }
-
-    ret = esp_bt_controller_enable(ESP_BT_MODE_BLE);
-    if (ret)
-    {
-        ESP_LOGE(TAG, "BT controller enable failed: %s", esp_err_to_name(ret));
-        return ret;
-    }
-
-    ret = esp_bluedroid_init();
-    if (ret)
-    {
-        ESP_LOGE(TAG, "Bluedroid init failed: %s", esp_err_to_name(ret));
-        return ret;
-    }
-
-    ret = esp_bluedroid_enable();
-    if (ret)
-    {
-        ESP_LOGE(TAG, "Bluedroid enable failed: %s", esp_err_to_name(ret));
-        return ret;
-    }
-
-    // Register callbacks
-    esp_ble_gatts_register_callback(gatts_event_handler);
-    esp_ble_gap_register_callback(gap_event_handler);
-    esp_ble_gatts_app_register(0);
-
-    // Set MTU
-    esp_ble_gatt_set_local_mtu(517);
-
-    // Start timeout timer
-    start_ble_timeout();
-
-    esp_ble_gatts_app_register(0);
-
-    vTaskDelay(pdMS_TO_TICKS(100));
-    esp_ble_gap_start_advertising(&adv_params);
-
-    ESP_LOGI(TAG, "BLE initialized");
-
-    return ESP_OK;
-}
-
 // Main initialization
 esp_err_t control_init(void)
 {
@@ -632,21 +36,20 @@ esp_err_t control_init(void)
 
     ESP_LOGI(TAG, "Initializing LED Controller...");
 
-    // Initialize NVS
-    ret = nvs_flash_init();
-    if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND)
+    // Initialize config
+    ret = config_init();
+    if (ret != ESP_OK)
     {
-        ESP_ERROR_CHECK(nvs_flash_erase());
-        ret = nvs_flash_init();
+        ESP_LOGE(TAG, "Config init failed: %s", esp_err_to_name(ret));
+        return ret;
     }
-    ESP_ERROR_CHECK(ret);
 
-    // Load configuration
-    load_config_from_nvs();
+    config_t current_config;
+    config_get_config(&current_config);
 
     // Initialize LED strips
     ret = led_init(current_config.led_pin_strip_a, current_config.led_pin_strip_b,
-                   DEFAULT_NUM_LEDS_A, DEFAULT_NUM_LEDS_B);
+                   current_config.led_count_strip_a, current_config.led_count_strip_b);
     if (ret != ESP_OK)
     {
         ESP_LOGE(TAG, "LED init failed: %s", esp_err_to_name(ret));
@@ -669,17 +72,18 @@ esp_err_t control_init(void)
         return ret;
     }
 
-    // Register mode change callback
-    rcsignal_register_callback(on_mode_change);
-
-    // Initialize BLE
-    ret = init_ble();
+    // Initialize local BTN
+    ret = localbtn_init(current_config.localBtn_pin);
     if (ret != ESP_OK)
     {
-        ESP_LOGE(TAG, "BLE init failed: %s", esp_err_to_name(ret));
+        ESP_LOGE(TAG, "Local BTN init failed: %s", esp_err_to_name(ret));
         return ret;
     }
 
+    // Register mode change callback
+    rcsignal_register_callback(on_mode_change);
+    localbtn_register_callback(on_mode_change);
+
     ESP_LOGI(TAG, "Control system initialized successfully");
 
     return ESP_OK;

main/control.h

@@ -1,35 +1,16 @@
 /**
  * @file control.h
- * @brief Control module for LED controller - handles initialization of LEDs, PWM, and Bluetooth
+ * @brief Control module for LED controller - handles initialization of LEDs, PWM
  */
 
 #ifndef CONTROL_H
 #define CONTROL_H
 
 #include "esp_err.h"
+
 #include <stdint.h>
 #include <stdbool.h>
 
-/**
- * @brief BLE auto-off timeout options
- */
-typedef enum {
-    BLE_TIMEOUT_NEVER = 0,
-    BLE_TIMEOUT_1MIN = 60,
-    BLE_TIMEOUT_5MIN = 300
-} ble_timeout_t;
-
-/**
- * @brief Configuration structure stored in NVS
- */
-typedef struct {
-    int8_t led_pin_strip_a;     // GPIO pin for LED strip A (-1 = not configured)
-    int8_t led_pin_strip_b;     // GPIO pin for LED strip B (-1 = not configured)
-    int8_t pwm_pin;             // GPIO pin for PWM input (-1 = not configured)
-    ble_timeout_t ble_timeout;  // BLE auto-off timeout
-    uint32_t magic;             // Magic number to validate config (0xDEADBEEF)
-} controller_config_t;
-
 /**
  * @brief Initialize the control system
  * Loads configuration from NVS and initializes subsystems
@@ -37,47 +18,6 @@ typedef struct {
  */
 esp_err_t control_init(void);
 
-/**
- * @brief Get current configuration
- * @return Pointer to current configuration (read-only)
- */
-const controller_config_t* control_get_config(void);
-
-/**
- * @brief Update configuration and save to NVS
- * @param config New configuration
- * @return ESP_OK on success
- */
-esp_err_t control_update_config(const controller_config_t* config);
-
-/**
- * @brief Reset configuration to defaults
- * @return ESP_OK on success
- */
-esp_err_t control_reset_config(void);
-
-/**
- * @brief Get BLE enabled status
- * @return true if BLE is enabled
- */
-bool control_is_ble_enabled(void);
-
-/**
- * @brief Manually disable BLE
- */
-void control_disable_ble(void);
-
-/**
- * @brief Emulate PWM pulse (for web button)
- */
-void control_emulate_pwm_pulse(void);
-
-/**
- * @brief Set animation mode manually
- * @param mode Animation mode (0-13)
- */
-void control_set_animation_mode(uint8_t mode);
-
 /**
  * @brief Get current animation mode
  * @return Current mode (0-13)

main/led.c

@@ -4,10 +4,12 @@
  */
 
 #include "led.h"
+
 #include "driver/rmt_tx.h"
 #include "esp_log.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/semphr.h"
+
 #include <string.h>
 #include <stdlib.h>
 
@@ -192,7 +194,7 @@ static esp_err_t init_strip(led_strip_t *strip, int8_t pin, uint16_t num_leds)
     rmt_tx_channel_config_t tx_chan_config = {
         .clk_src = RMT_CLK_SRC_DEFAULT,
         .gpio_num = pin,
-        .mem_block_symbols = 64,
+        .mem_block_symbols = 48,
         .resolution_hz = 80000000, // 80MHz
         .trans_queue_depth = 4,
     };
@@ -319,7 +321,10 @@ static void show_strip(led_strip_t *strip)
     // Convert RGB to GRB for WS2812B
     uint8_t *grb_data = malloc(strip->num_leds * 3);
     if (!grb_data)
+    {
+        ESP_LOGE(TAG, "Failed to allocate GRB buffer");
         return;
+    }
 
     for (uint16_t i = 0; i < strip->num_leds; i++)
     {
@@ -332,7 +337,21 @@ static void show_strip(led_strip_t *strip)
         .loop_count = 0,
     };
 
-    rmt_transmit(strip->rmt_channel, strip->encoder, grb_data, strip->num_leds * 3, &tx_config);
+    esp_err_t ret = rmt_transmit(strip->rmt_channel, strip->encoder, grb_data, strip->num_leds * 3, &tx_config);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "RMT transmit failed: %s", esp_err_to_name(ret));
+        free(grb_data);
+        return;
+    }
+
+    // Wait for transmission to complete before freeing buffer
+    ret = rmt_tx_wait_all_done(strip->rmt_channel, pdMS_TO_TICKS(100));
+    if (ret != ESP_OK)
+    {
+        ESP_LOGW(TAG, "RMT wait timeout");
+    }
+
     free(grb_data);
 }
 

main/led.h

@@ -6,9 +6,10 @@
 #ifndef LED_H
 #define LED_H
 
-#include <stdint.h>
 #include "esp_err.h"
 
+#include <stdint.h>
+
 #define LED_STRIP_MAX_LEDS 100  // Maximum LEDs per strip
 
 /**

main/localbtn.c

@@ -0,0 +1,208 @@
+/**
+ * @file localbtn.c
+ * @brief Local GPIO button reading using interrupt-based edge detection
+ */
+
+#include "localbtn.h"
+
+#include "driver/gpio.h"
+#include "esp_timer.h"
+#include "esp_log.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/queue.h"
+
+#include <string.h>
+
+static const char *TAG = "LOCALBTN";
+
+#define DEBOUNCE_TIME_MS 50 // Debounce time in milliseconds
+
+// Button state
+static struct
+{
+    int8_t gpio_pin;
+    bool initialized;
+    TaskHandle_t task_handle;
+    QueueHandle_t event_queue;
+    localbtn_mode_change_callback_t callback;
+    int64_t last_press_time; // For debouncing
+} button_state = {
+    .gpio_pin = -1,
+    .initialized = false,
+    .task_handle = NULL,
+    .event_queue = NULL,
+    .callback = NULL,
+    .last_press_time = 0};
+
+/**
+ * @brief GPIO interrupt handler (ISR)
+ * Minimal work in ISR - just send event to task
+ */
+static void IRAM_ATTR gpio_isr_handler(void *arg)
+{
+    int64_t now = esp_timer_get_time();
+
+    // Send timestamp to queue for debouncing in task
+    BaseType_t high_priority_task_woken = pdFALSE;
+    xQueueSendFromISR(button_state.event_queue, &now, &high_priority_task_woken);
+
+    if (high_priority_task_woken)
+    {
+        portYIELD_FROM_ISR();
+    }
+}
+
+/**
+ * @brief Button handling task
+ * Handles debouncing and callback execution
+ */
+static void localbtn_task(void *arg)
+{
+    int64_t event_time;
+
+    ESP_LOGI(TAG, "Button task started, monitoring GPIO%d", button_state.gpio_pin);
+
+    while (1)
+    {
+        // Wait for button press event from ISR
+        if (xQueueReceive(button_state.event_queue, &event_time, portMAX_DELAY))
+        {
+            // Debouncing: Check if enough time has passed since last press
+            int64_t time_since_last_press = (event_time - button_state.last_press_time) / 1000; // Convert to ms
+
+            if (time_since_last_press >= DEBOUNCE_TIME_MS)
+            {
+                // Valid button press - verify button is still pressed
+                vTaskDelay(pdMS_TO_TICKS(10)); // Small delay to ensure stable state
+
+                if (gpio_get_level(button_state.gpio_pin) == 0)
+                {
+                    ESP_LOGI(TAG, "Button press detected on GPIO%d", button_state.gpio_pin);
+
+                    button_state.last_press_time = event_time;
+
+                    // Execute callback
+                    if (button_state.callback)
+                    {
+                        button_state.callback();
+                    }
+                }
+            }
+        }
+    }
+}
+
+esp_err_t localbtn_init(int8_t pin_localbtn)
+{
+    if (pin_localbtn < 0)
+    {
+        ESP_LOGW(TAG, "Button disabled (invalid pin: %d)", pin_localbtn);
+        return ESP_ERR_NOT_SUPPORTED;
+    }
+
+    if (button_state.initialized)
+    {
+        ESP_LOGW(TAG, "Button already initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    button_state.gpio_pin = pin_localbtn;
+    button_state.last_press_time = 0U;
+
+    // Create event queue for ISR->Task communication
+    button_state.event_queue = xQueueCreate(10, sizeof(int64_t));
+    if (button_state.event_queue == NULL)
+    {
+        ESP_LOGE(TAG, "Failed to create event queue");
+        return ESP_ERR_NO_MEM;
+    }
+
+    // Configure GPIO
+    gpio_config_t io_conf = {
+        .pin_bit_mask = (1ULL << pin_localbtn),
+        .mode = GPIO_MODE_INPUT,
+        .pull_up_en = GPIO_PULLUP_ENABLE, // Enable internal pull-up (safe even with external)
+        .pull_down_en = GPIO_PULLDOWN_DISABLE,
+        .intr_type = GPIO_INTR_NEGEDGE // Interrupt on falling edge (button press)
+    };
+
+    esp_err_t ret = gpio_config(&io_conf);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "GPIO config failed: %s", esp_err_to_name(ret));
+        vQueueDelete(button_state.event_queue);
+        return ret;
+    }
+
+    // Add ISR handler for this GPIO
+    ret = gpio_isr_handler_add(pin_localbtn, gpio_isr_handler, NULL);
+    if (ret != ESP_OK)
+    {
+        ESP_LOGE(TAG, "ISR handler add failed: %s", esp_err_to_name(ret));
+        vQueueDelete(button_state.event_queue);
+        return ret;
+    }
+
+    // Create button handling task
+    BaseType_t task_ret = xTaskCreate(
+        localbtn_task,
+        "localbtn_task",
+        2048,
+        NULL,
+        5, // Priority 5 (same as other tasks)
+        &button_state.task_handle);
+
+    if (task_ret != pdPASS)
+    {
+        ESP_LOGE(TAG, "Failed to create button task");
+        gpio_isr_handler_remove(pin_localbtn);
+        vQueueDelete(button_state.event_queue);
+        return ESP_FAIL;
+    }
+
+    button_state.initialized = true;
+    ESP_LOGI(TAG, "Button initialized on GPIO%d with interrupt-based detection", pin_localbtn);
+    ESP_LOGI(TAG, "Debounce time: %d ms", DEBOUNCE_TIME_MS);
+
+    return ESP_OK;
+}
+
+void localbtn_deinit(void)
+{
+    if (!button_state.initialized)
+    {
+        return;
+    }
+
+    // Remove ISR handler
+    if (button_state.gpio_pin >= 0)
+    {
+        gpio_isr_handler_remove(button_state.gpio_pin);
+    }
+
+    // Delete task
+    if (button_state.task_handle)
+    {
+        vTaskDelete(button_state.task_handle);
+        button_state.task_handle = NULL;
+    }
+
+    // Delete queue
+    if (button_state.event_queue)
+    {
+        vQueueDelete(button_state.event_queue);
+        button_state.event_queue = NULL;
+    }
+
+    button_state.initialized = false;
+    button_state.callback = NULL;
+
+    ESP_LOGI(TAG, "Button deinitialized");
+}
+
+void localbtn_register_callback(localbtn_mode_change_callback_t cb)
+{
+    button_state.callback = cb;
+    ESP_LOGI(TAG, "Callback registered");
+}

main/localbtn.h

@@ -0,0 +1,37 @@
+/**
+ * @file localbtn.h
+ * @brief Local GPIO button reading using interrupt-based edge detection
+ */
+
+#ifndef LOCALBTN_H
+#define LOCALBTN_H
+
+#include "esp_err.h"
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/**
+ * @brief Callback function type for mode changes
+ */
+typedef void (*localbtn_mode_change_callback_t)();
+
+/**
+ * @brief Initialize local button with interrupt-based detection
+ * @param pin_localbtn GPIO pin number for button (active low)
+ * @return ESP_OK on success
+ */
+esp_err_t localbtn_init(int8_t pin_localbtn);
+
+/**
+ * @brief Deinitialize local button reading
+ */
+void localbtn_deinit(void);
+
+/**
+ * @brief Register callback for mode changes
+ * @param cb Callback function
+ */
+void localbtn_register_callback(localbtn_mode_change_callback_t cb);
+
+#endif // LOCALBTN_H

main/main.c

@@ -3,15 +3,16 @@
  * @brief Main application entry point for LED Controller
  */
 
-#include <stdio.h>
+#include "control.h"
+#include "animation.h"
+#include "led.h"
+
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_log.h"
 #include "esp_system.h"
 
-#include "control.h"
-#include "animation.h"
-#include "led.h"
+#include <stdio.h>
 
 static const char *TAG = "MAIN";
 
@@ -44,7 +45,7 @@ void app_main(void)
     ESP_LOGI(TAG, "  ESP32 LED Controller for Model Aircraft");
     ESP_LOGI(TAG, "==============================================");
 
-    // Initialize control system (LEDs, PWM, BLE)
+    // Initialize control system (LEDs, PWM)
     esp_err_t ret = control_init();
     if (ret != ESP_OK)
     {
@@ -75,9 +76,9 @@ void app_main(void)
         }
     }
 
+    animation_set_mode((animation_mode_t)control_get_animation_mode());
+
     ESP_LOGI(TAG, "System initialized successfully");
-    ESP_LOGI(TAG, "BLE Device Name: LED-Controller");
-    ESP_LOGI(TAG, "Connect via Web-BLE to configure");
 
     // Main loop - just monitor system status
     while (1)
@@ -85,10 +86,6 @@ void app_main(void)
         vTaskDelay(pdMS_TO_TICKS(5000));
 
         // Periodic status logging
-        //const controller_config_t *config = control_get_config();
-        ESP_LOGI(TAG, "Status - Mode: %d, BLE: %s, PWM Active: %s",
-                 control_get_animation_mode(),
-                 control_is_ble_enabled() ? "ON" : "OFF",
-                 "N/A"); // Could add rcsignal_is_active() here
+        ESP_LOGI(TAG, "Animation Mode set to: %s", animation_get_mode_name(control_get_animation_mode()));
     }
 }

main/rcsignal.c

@@ -4,19 +4,19 @@
  */
 
 #include "rcsignal.h"
+
 #include "driver/gpio.h"
 #include "esp_timer.h"
 #include "esp_log.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
+
 #include <string.h>
 
 static const char *TAG = "RCSIGNAL";
 
-#define MAX_MODES 14
 #define PULSE_THRESHOLD_US 1500
 #define SIGNAL_TIMEOUT_MS 100
-
 static struct
 {
     int8_t gpio_pin;
@@ -98,14 +98,10 @@ static void monitor_task(void *arg)
             {
                 // Mode change detected
                 rcsignal.pull_detected = false;
-                rcsignal.current_mode = (rcsignal.current_mode + 1) % MAX_MODES;
-
-                ESP_LOGI(TAG, "Mode changed to: %d (pulse: %lu us)",
-                         rcsignal.current_mode, rcsignal.pulse_width_us);
 
                 if (rcsignal.callback)
                 {
-                    rcsignal.callback(rcsignal.current_mode);
+                    rcsignal.callback();
                 }
             }
         }
@@ -185,17 +181,6 @@ bool rcsignal_is_active(void)
     return rcsignal.signal_active;
 }
 
-void rcsignal_trigger_mode_change(void)
-{
-    rcsignal.current_mode = (rcsignal.current_mode + 1) % MAX_MODES;
-    ESP_LOGI(TAG, "Manual mode change to: %d", rcsignal.current_mode);
-
-    if (rcsignal.callback)
-    {
-        rcsignal.callback(rcsignal.current_mode);
-    }
-}
-
 uint8_t rcsignal_get_current_mode(void)
 {
     return rcsignal.current_mode;

main/rcsignal.h

@@ -6,15 +6,15 @@
 #ifndef RCSIGNAL_H
 #define RCSIGNAL_H
 
+#include "esp_err.h"
+
 #include <stdint.h>
 #include <stdbool.h>
-#include "esp_err.h"
 
 /**
  * @brief Callback function type for mode changes
- * @param new_mode New animation mode (0-13)
  */
-typedef void (*rcsignal_mode_change_callback_t)(uint8_t new_mode);
+typedef void (*rcsignal_mode_change_callback_t)();
 
 /**
  * @brief Initialize RC signal reading
@@ -46,11 +46,6 @@ uint32_t rcsignal_get_pulse_width(void);
  */
 bool rcsignal_is_active(void);
 
-/**
- * @brief Manually trigger mode change (for emulation)
- */
-void rcsignal_trigger_mode_change(void);
-
 /**
  * @brief Get current mode
  * @return Current animation mode (0-13)

nfc01.ino

@@ -1,85 +0,0 @@
-#include "FastLED.h"
-
-int rc01 = 9;
-int rc02 = 10;
-int led_spotlight = 2;
-int rc01Val = 0;
-int rc02Val = 0;
-int modus = 0;
-int modusMax = 13;
-int red = 0;
-int green = 0;
-int blue = 0;
-int randomVal = 0;
-
-#define DATA_PIN    3
-#define LED_TYPE WS2812B
-#define COLOR_ORDER GRB
-#define NUM_LEDS    44
-CRGB leds[NUM_LEDS];
-#define BRIGHTNESS         255
-#define FRAMES_PER_SECOND  60
-#define ARRAY_SIZE(A) (sizeof(A) / sizeof((A)[0]))
-
-boolean pullRC = true;
-
-void setup() {
-  //Serial.begin(9600);
-  Serial.println("_-_-_- Night Fly Controller V01 _-_-_-");
-  pinMode(rc01, INPUT);
-  pinMode(rc02, INPUT);
-  pinMode(led_spotlight, OUTPUT);
-  pinMode(LED_BUILTIN, OUTPUT);
-  digitalWrite(LED_BUILTIN, HIGH);
-
-  delay(3000); // 3 second delay for recovery
-
-  // tell FastLED about the LED strip configuration
-  FastLED.addLeds<LED_TYPE, DATA_PIN, COLOR_ORDER>(leds, NUM_LEDS).setCorrection(TypicalLEDStrip);
-  // set master brightness control
-  FastLED.setBrightness(BRIGHTNESS);
-}
-
-
-// List of patterns to cycle through.  Each is defined as a separate function below.
-typedef void (*SimplePatternList[])();
-SimplePatternList gPatterns = { blackMode, redMode, blueMode, greenMode, whiteMode, rainbow, rainbowWithGlitter, confetti, sinelon, bpm, navigation, chase, chaseRGB, randomMode };
-uint8_t gHue = 0; // rotating "base color" used by many of the patterns
-
-void loop() {
-
-  if (getRC01()) {
-    digitalWrite(led_spotlight, HIGH);
-
-  } else {
-    digitalWrite(led_spotlight, LOW);
-  }
-
-setModus();
-  
-}
-
-void setModus(){
-  if (getRC02()) {
-    modus = modus + 1;
-    if (modus > modusMax) {
-      modus = 1;
-    }
-  }
-  Serial.println(modus);
-  serialPrintModus(modus);
-  
-  gPatterns[modus]();
-
-  // send the 'leds' array out to the actual LED strip
-  FastLED.show();
-  // insert a delay to keep the framerate modest
-  FastLED.delay(1000 / FRAMES_PER_SECOND);
-
-  // do some periodic updates
-  EVERY_N_MILLISECONDS( 20 ) {
-    gHue++;  // slowly cycle the "base color" through the rainbow
-  }
-
-}
-

tools/dev_https_server.py

@@ -1,120 +0,0 @@
-#!/usr/bin/env python3
-"""
-Ad-hoc Flask HTTPS Server for LED Controller Webapp
-Serves the webapp over HTTPS (required for Web Bluetooth API)
-"""
-
-import os
-import sys
-from flask import Flask, send_from_directory, send_file
-from pathlib import Path
-
-# Configuration
-HOST = '0.0.0.0'  # Listen on all interfaces
-PORT = 5000       # HTTPS port
-DEBUG = True
-
-# Get webapp directory (one level up from tools/)
-SCRIPT_DIR = Path(__file__).parent
-WEBAPP_DIR = SCRIPT_DIR.parent / 'webapp'
-
-# Verify webapp directory exists
-if not WEBAPP_DIR.exists():
-    print(f"❌ ERROR: Webapp directory not found at {WEBAPP_DIR}")
-    print(f"   Please run this script from the base repository directory")
-    sys.exit(1)
-
-# Create Flask app
-app = Flask(__name__)
-
-@app.route('/')
-def index():
-    """Serve index.html"""
-    return send_file(WEBAPP_DIR / 'index.html')
-
-@app.route('/app/<path:filename>')
-def serve_app(filename):
-    """Serve files from app/ directory"""
-    return send_from_directory(WEBAPP_DIR / 'app', filename)
-
-@app.route('/css/<path:filename>')
-def serve_css(filename):
-    """Serve files from css/ directory"""
-    return send_from_directory(WEBAPP_DIR / 'css', filename)
-
-@app.route('/data/<path:filename>')
-def serve_data(filename):
-    """Serve files from data/ directory"""
-    return send_from_directory(WEBAPP_DIR / 'data', filename)
-
-@app.route('/favicon.ico')
-def favicon():
-    """Serve favicon"""
-    return send_file(WEBAPP_DIR / 'data' / 'favicon.ico')
-
-def print_banner():
-    """Print startup banner with instructions"""
-    print("=" * 70)
-    print("   🚀 LED Controller HTTPS Development Server")
-    print("=" * 70)
-    print()
-    print("📱 Web Bluetooth requires HTTPS!")
-    print("   This server provides a self-signed certificate for development.")
-    print()
-    print("🌐 Access the webapp at:")
-    print(f"   https://localhost:{PORT}")
-    print(f"   https://127.0.0.1:{PORT}")
-    print(f"   https://<your-ip>:{PORT}")
-    print()
-    print("⚠️  Browser Security Warning:")
-    print("   You'll see a 'Not Secure' warning - this is normal!")
-    print("   Click 'Advanced' → 'Proceed to localhost' (or similar)")
-    print()
-    print("🔧 To stop the server: Press Ctrl+C")
-    print("=" * 70)
-    print()
-
-def get_local_ip():
-    """Get local IP address for convenience"""
-    import socket
-    try:
-        s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
-        s.connect(("8.8.8.8", 80))
-        ip = s.getsockname()[0]
-        s.close()
-        return ip
-    except:
-        return "unknown"
-
-if __name__ == '__main__':
-    print_banner()
-    
-    # Print local IP for convenience
-    local_ip = get_local_ip()
-    if local_ip != "unknown":
-        print(f"💡 Your local IP: {local_ip}")
-        print(f"   Access from phone: https://{local_ip}:{PORT}")
-        print()
-    
-    print("🔄 Starting HTTPS server...")
-    print()
-    
-    try:
-        # Run with ad-hoc SSL context (self-signed certificate)
-        # Flask will automatically generate a certificate
-        app.run(
-            host=HOST,
-            port=PORT,
-            debug=DEBUG,
-            ssl_context='adhoc'  # Auto-generate self-signed cert
-        )
-    except OSError as e:
-        if "Address already in use" in str(e):
-            print(f"❌ ERROR: Port {PORT} is already in use!")
-            print(f"   Try a different port or stop the other service.")
-            sys.exit(1)
-        else:
-            raise
-    except KeyboardInterrupt:
-        print("\n\n👋 Server stopped by user")
-        sys.exit(0)

tools/requirements.txt

@@ -1,5 +0,0 @@
-# Flask HTTPS Development Server Requirements
-# Install with: pip install -r requirements.txt
-
-Flask>=2.3.0
-pyOpenSSL>=23.0.0  # Required for adhoc SSL certificate generation

webapp/app/app.js

@@ -1,322 +0,0 @@
-/**
- * LED Controller Web-BLE Application
- * Communicates with ESP32 LED Controller via Bluetooth Low Energy
- */
-
-// BLE Service and Characteristic UUIDs
-const SERVICE_UUID = 0x00FF;
-const CHAR_CONFIG_UUID = 0xFF01;
-const CHAR_MODE_UUID = 0xFF02;
-const CHAR_PWM_UUID = 0xFF03;
-const CHAR_OTA_UUID = 0xFF04;
-
-// Animation mode names
-const MODE_NAMES = [
-    'Black', 'Red', 'Blue', 'Green', 'White',
-    'Rainbow', 'Rainbow Glitter', 'Confetti', 'Sinelon',
-    'BPM Pulse', 'Navigation', 'Chase (Red)', 'Chase (RGB)', 'Random'
-];
-
-class LEDController {
-    constructor() {
-        this.device = null;
-        this.server = null;
-        this.service = null;
-        this.characteristics = {
-            config: null,
-            mode: null,
-            pwm: null,
-            ota: null
-        };
-        this.connected = false;
-        
-        this.initUI();
-    }
-
-    initUI() {
-        // Connect button
-        document.getElementById('connect-btn').addEventListener('click', () => this.connect());
-        
-        // Save configuration button
-        document.getElementById('save-config-btn').addEventListener('click', () => this.saveConfig());
-        
-        // PWM emulation button
-        document.getElementById('pwm-emulate-btn').addEventListener('click', () => this.emulatePWM());
-        
-        // Mode selection buttons
-        document.querySelectorAll('.btn-mode').forEach(btn => {
-            btn.addEventListener('click', (e) => {
-                const mode = parseInt(e.target.dataset.mode);
-                this.setMode(mode);
-            });
-        });
-        
-        // Firmware file selection
-        document.getElementById('firmware-file').addEventListener('change', (e) => {
-            const uploadBtn = document.getElementById('ota-upload-btn');
-            uploadBtn.disabled = !e.target.files.length;
-        });
-        
-        // OTA upload button
-        document.getElementById('ota-upload-btn').addEventListener('click', () => this.uploadFirmware());
-    }
-
-    async connect() {
-        try {
-            console.log('Requesting Bluetooth Device...');
-            
-            this.device = await navigator.bluetooth.requestDevice({
-                filters: [{ name: 'LED-Controller' }],
-                optionalServices: [SERVICE_UUID]
-            });
-            
-            console.log('Connecting to GATT Server...');
-            this.server = await this.device.gatt.connect();
-            
-            console.log('Getting Service...');
-            this.service = await this.server.getPrimaryService(SERVICE_UUID);
-            
-            console.log('Getting Characteristics...');
-            this.characteristics.config = await this.service.getCharacteristic(CHAR_CONFIG_UUID);
-            this.characteristics.mode = await this.service.getCharacteristic(CHAR_MODE_UUID);
-            this.characteristics.pwm = await this.service.getCharacteristic(CHAR_PWM_UUID);
-            this.characteristics.ota = await this.service.getCharacteristic(CHAR_OTA_UUID);
-            
-            this.connected = true;
-            this.updateConnectionStatus(true);
-            
-            // Load current configuration
-            await this.loadConfig();
-            await this.loadCurrentMode();
-            
-            // Show control sections
-            document.getElementById('config-section').classList.remove('hidden');
-            document.getElementById('control-section').classList.remove('hidden');
-            document.getElementById('ota-section').classList.remove('hidden');
-            
-            console.log('Connected successfully!');
-            
-            // Handle disconnection
-            this.device.addEventListener('gattserverdisconnected', () => {
-                this.onDisconnected();
-            });
-            
-        } catch (error) {
-            console.error('Connection failed:', error);
-            alert('Failed to connect: ' + error.message);
-        }
-    }
-
-    async loadConfig() {
-        try {
-            const value = await this.characteristics.config.readValue();
-            const config = this.parseConfig(value);
-            
-            document.getElementById('led-pin-a').value = config.ledPinA;
-            document.getElementById('led-pin-b').value = config.ledPinB;
-            document.getElementById('pwm-pin').value = config.pwmPin;
-            document.getElementById('ble-timeout').value = config.bleTimeout;
-            
-            console.log('Configuration loaded:', config);
-        } catch (error) {
-            console.error('Failed to load config:', error);
-        }
-    }
-
-    async loadCurrentMode() {
-        try {
-            const value = await this.characteristics.mode.readValue();
-            const mode = value.getUint8(0);
-            this.updateCurrentMode(mode);
-        } catch (error) {
-            console.error('Failed to load current mode:', error);
-        }
-    }
-
-    parseConfig(dataView) {
-        return {
-            ledPinA: dataView.getInt8(0),
-            ledPinB: dataView.getInt8(1),
-            pwmPin: dataView.getInt8(2),
-            bleTimeout: dataView.getUint32(3, true),
-            magic: dataView.getUint32(7, true)
-        };
-    }
-
-    createConfigBuffer(config) {
-        const buffer = new ArrayBuffer(11);
-        const view = new DataView(buffer);
-        
-        view.setInt8(0, config.ledPinA);
-        view.setInt8(1, config.ledPinB);
-        view.setInt8(2, config.pwmPin);
-        view.setUint32(3, config.bleTimeout, true);
-        view.setUint32(7, 0xDEADBEEF, true); // Magic number
-        
-        return buffer;
-    }
-
-    async saveConfig() {
-        try {
-            const config = {
-                ledPinA: parseInt(document.getElementById('led-pin-a').value),
-                ledPinB: parseInt(document.getElementById('led-pin-b').value),
-                pwmPin: parseInt(document.getElementById('pwm-pin').value),
-                bleTimeout: parseInt(document.getElementById('ble-timeout').value)
-            };
-            
-            const buffer = this.createConfigBuffer(config);
-            await this.characteristics.config.writeValue(buffer);
-            
-            alert('Configuration saved! Device will restart if pins changed.');
-            console.log('Configuration saved:', config);
-        } catch (error) {
-            console.error('Failed to save config:', error);
-            alert('Failed to save configuration: ' + error.message);
-        }
-    }
-
-    async setMode(mode) {
-        try {
-            const buffer = new Uint8Array([mode]);
-            await this.characteristics.mode.writeValue(buffer);
-            this.updateCurrentMode(mode);
-            console.log('Mode set to:', MODE_NAMES[mode]);
-        } catch (error) {
-            console.error('Failed to set mode:', error);
-        }
-    }
-
-    async emulatePWM() {
-        try {
-            const buffer = new Uint8Array([1]);
-            await this.characteristics.pwm.writeValue(buffer);
-            console.log('PWM pulse emulated');
-            
-            // Read back the new mode
-            setTimeout(() => this.loadCurrentMode(), 100);
-        } catch (error) {
-            console.error('Failed to emulate PWM:', error);
-        }
-    }
-
-    async uploadFirmware() {
-        const fileInput = document.getElementById('firmware-file');
-        const file = fileInput.files[0];
-        
-        if (!file) {
-            alert('Please select a firmware file');
-            return;
-        }
-        
-        if (!confirm('This will update the firmware and reset all settings. Continue?')) {
-            return;
-        }
-        
-        try {
-            const arrayBuffer = await file.arrayBuffer();
-            const data = new Uint8Array(arrayBuffer);
-            
-            const progressBar = document.getElementById('ota-progress-bar');
-            const progressText = document.getElementById('ota-progress-text');
-            const progressContainer = document.getElementById('ota-progress');
-            
-            progressContainer.classList.remove('hidden');
-            
-            const chunkSize = 512;
-            const totalChunks = Math.ceil(data.length / chunkSize);
-            
-            console.log(`Starting OTA upload: ${data.length} bytes, ${totalChunks} chunks`);
-            
-            for (let i = 0; i < totalChunks; i++) {
-                const start = i * chunkSize;
-                const end = Math.min(start + chunkSize, data.length);
-                const chunk = data.slice(start, end);
-                
-                await this.characteristics.ota.writeValue(chunk);
-                
-                const progress = Math.round((i + 1) / totalChunks * 100);
-                progressBar.style.width = progress + '%';
-                progressText.textContent = progress + '%';
-                
-                console.log(`Upload progress: ${progress}%`);
-                
-                // Small delay to prevent overwhelming the device
-                await new Promise(resolve => setTimeout(resolve, 20));
-            }
-            
-            alert('Firmware uploaded successfully! Device will restart.');
-            console.log('OTA upload complete');
-            
-        } catch (error) {
-            console.error('OTA upload failed:', error);
-            alert('Firmware upload failed: ' + error.message);
-        }
-    }
-
-    updateCurrentMode(mode) {
-        const modeName = MODE_NAMES[mode] || 'Unknown';
-        document.getElementById('current-mode').textContent = modeName;
-    }
-
-    updateConnectionStatus(connected) {
-        const indicator = document.getElementById('status-indicator');
-        const statusText = document.getElementById('connection-status');
-        const connectBtn = document.getElementById('connect-btn');
-        
-        if (connected) {
-            indicator.classList.remove('disconnected');
-            indicator.classList.add('connected');
-            statusText.textContent = 'Connected';
-            connectBtn.textContent = 'Disconnect';
-            connectBtn.onclick = () => this.disconnect();
-        } else {
-            indicator.classList.remove('connected');
-            indicator.classList.add('disconnected');
-            statusText.textContent = 'Disconnected';
-            connectBtn.textContent = 'Connect via BLE';
-            connectBtn.onclick = () => this.connect();
-        }
-    }
-
-    disconnect() {
-        if (this.device && this.device.gatt.connected) {
-            this.device.gatt.disconnect();
-        }
-        this.onDisconnected();
-    }
-
-    onDisconnected() {
-        console.log('Disconnected from device');
-        this.connected = false;
-        this.device = null;
-        this.server = null;
-        this.service = null;
-        this.characteristics = {
-            config: null,
-            mode: null,
-            pwm: null,
-            ota: null
-        };
-        
-        this.updateConnectionStatus(false);
-        
-        // Hide control sections
-        document.getElementById('config-section').classList.add('hidden');
-        document.getElementById('control-section').classList.add('hidden');
-        document.getElementById('ota-section').classList.add('hidden');
-    }
-}
-
-// Initialize app when DOM is loaded
-document.addEventListener('DOMContentLoaded', () => {
-    // Check if Web Bluetooth is supported
-    if (!navigator.bluetooth) {
-        alert('Web Bluetooth is not supported in this browser. Please use Chrome, Edge, or Opera.');
-        document.getElementById('connect-btn').disabled = true;
-        return;
-    }
-    
-    console.log('LED Controller Web-BLE Interface loaded');
-    new LEDController();
-});

webapp/css/style.css

@@ -1,313 +0,0 @@
-/* LED Controller Web-BLE Interface Styles */
-
-* {
-    margin: 0;
-    padding: 0;
-    box-sizing: border-box;
-}
-
-:root {
-    --primary-color: #2196F3;
-    --success-color: #4CAF50;
-    --warning-color: #FF9800;
-    --danger-color: #F44336;
-    --dark-bg: #1a1a2e;
-    --card-bg: #16213e;
-    --text-primary: #ffffff;
-    --text-secondary: #b0b0b0;
-    --border-color: #0f4c75;
-    --hover-bg: #1e3a5f;
-}
-
-body {
-    font-family: 'Segoe UI', Tahoma, Geneva, Verdana, sans-serif;
-    background: linear-gradient(135deg, var(--dark-bg) 0%, #0f3460 100%);
-    color: var(--text-primary);
-    min-height: 100vh;
-    padding: 20px;
-}
-
-.container {
-    max-width: 800px;
-    margin: 0 auto;
-}
-
-header {
-    text-align: center;
-    margin-bottom: 30px;
-}
-
-header h1 {
-    font-size: 2.5em;
-    margin-bottom: 10px;
-    text-shadow: 2px 2px 4px rgba(0, 0, 0, 0.5);
-}
-
-.subtitle {
-    color: var(--text-secondary);
-    font-size: 1.1em;
-}
-
-.card {
-    background: var(--card-bg);
-    border-radius: 12px;
-    padding: 25px;
-    margin-bottom: 20px;
-    box-shadow: 0 4px 6px rgba(0, 0, 0, 0.3);
-    border: 1px solid var(--border-color);
-}
-
-.card h2 {
-    margin-bottom: 20px;
-    color: var(--primary-color);
-    font-size: 1.5em;
-}
-
-.hidden {
-    display: none !important;
-}
-
-/* Connection Status */
-.connection-status {
-    display: flex;
-    align-items: center;
-    gap: 10px;
-    margin-bottom: 15px;
-    font-size: 1.1em;
-}
-
-.status-indicator {
-    width: 16px;
-    height: 16px;
-    border-radius: 50%;
-    animation: pulse 2s infinite;
-}
-
-.status-indicator.disconnected {
-    background: var(--danger-color);
-}
-
-.status-indicator.connected {
-    background: var(--success-color);
-}
-
-@keyframes pulse {
-    0%, 100% { opacity: 1; }
-    50% { opacity: 0.5; }
-}
-
-/* Form Elements */
-.form-group {
-    margin-bottom: 20px;
-}
-
-.form-group label {
-    display: block;
-    margin-bottom: 8px;
-    font-weight: 500;
-    color: var(--text-primary);
-}
-
-.form-group input[type="number"],
-.form-group select {
-    width: 100%;
-    padding: 12px;
-    background: var(--dark-bg);
-    border: 1px solid var(--border-color);
-    border-radius: 6px;
-    color: var(--text-primary);
-    font-size: 1em;
-}
-
-.form-group input[type="number"]:focus,
-.form-group select:focus {
-    outline: none;
-    border-color: var(--primary-color);
-}
-
-.form-group small {
-    display: block;
-    margin-top: 5px;
-    color: var(--text-secondary);
-    font-size: 0.9em;
-}
-
-.form-group input[type="file"] {
-    width: 100%;
-    padding: 10px;
-    background: var(--dark-bg);
-    border: 2px dashed var(--border-color);
-    border-radius: 6px;
-    color: var(--text-primary);
-    cursor: pointer;
-}
-
-/* Buttons */
-.btn {
-    padding: 12px 24px;
-    border: none;
-    border-radius: 6px;
-    font-size: 1em;
-    font-weight: 600;
-    cursor: pointer;
-    transition: all 0.3s ease;
-    width: 100%;
-}
-
-.btn:hover {
-    transform: translateY(-2px);
-    box-shadow: 0 4px 8px rgba(0, 0, 0, 0.3);
-}
-
-.btn:active {
-    transform: translateY(0);
-}
-
-.btn:disabled {
-    opacity: 0.5;
-    cursor: not-allowed;
-}
-
-.btn-primary {
-    background: var(--primary-color);
-    color: white;
-}
-
-.btn-success {
-    background: var(--success-color);
-    color: white;
-}
-
-.btn-warning {
-    background: var(--warning-color);
-    color: white;
-}
-
-.btn-secondary {
-    background: var(--border-color);
-    color: white;
-}
-
-.btn-mode {
-    background: var(--hover-bg);
-    color: var(--text-primary);
-    border: 1px solid var(--border-color);
-}
-
-.btn-mode:hover {
-    background: var(--primary-color);
-}
-
-/* Button Grid */
-.button-grid {
-    display: grid;
-    grid-template-columns: repeat(auto-fill, minmax(150px, 1fr));
-    gap: 10px;
-    margin-bottom: 20px;
-}
-
-/* Current Mode Display */
-.current-mode {
-    background: var(--dark-bg);
-    padding: 15px;
-    border-radius: 6px;
-    margin-bottom: 20px;
-    text-align: center;
-    font-size: 1.1em;
-    border: 1px solid var(--border-color);
-}
-
-.current-mode span {
-    color: var(--primary-color);
-    font-weight: bold;
-}
-
-/* Progress Bar */
-.progress-container {
-    width: 100%;
-    height: 40px;
-    background: var(--dark-bg);
-    border-radius: 20px;
-    overflow: hidden;
-    margin: 20px 0;
-    position: relative;
-    border: 1px solid var(--border-color);
-}
-
-.progress-bar {
-    height: 100%;
-    background: linear-gradient(90deg, var(--primary-color), var(--success-color));
-    transition: width 0.3s ease;
-    width: 0%;
-}
-
-.progress-text {
-    position: absolute;
-    top: 50%;
-    left: 50%;
-    transform: translate(-50%, -50%);
-    font-weight: bold;
-    text-shadow: 1px 1px 2px rgba(0, 0, 0, 0.5);
-}
-
-/* Warning Box */
-.warning {
-    background: rgba(255, 152, 0, 0.1);
-    border: 1px solid var(--warning-color);
-    border-radius: 6px;
-    padding: 15px;
-    margin-bottom: 20px;
-    color: var(--warning-color);
-    font-weight: 500;
-}
-
-/* Divider */
-.divider {
-    height: 1px;
-    background: var(--border-color);
-    margin: 20px 0;
-}
-
-/* Footer */
-footer {
-    text-align: center;
-    margin-top: 40px;
-    padding: 20px;
-    color: var(--text-secondary);
-}
-
-footer small {
-    font-size: 0.9em;
-}
-
-/* Responsive Design */
-@media (max-width: 600px) {
-    header h1 {
-        font-size: 2em;
-    }
-    
-    .button-grid {
-        grid-template-columns: repeat(auto-fill, minmax(120px, 1fr));
-    }
-    
-    .btn {
-        font-size: 0.9em;
-        padding: 10px 16px;
-    }
-}
-
-/* Animations */
-@keyframes fadeIn {
-    from {
-        opacity: 0;
-        transform: translateY(20px);
-    }
-    to {
-        opacity: 1;
-        transform: translateY(0);
-    }
-}
-
-.card {
-    animation: fadeIn 0.5s ease;
-}

webapp/index.html

@@ -1,115 +0,0 @@
-<!DOCTYPE html>
-<html lang="en">
-<head>
-    <meta charset="UTF-8">
-    <meta name="viewport" content="width=device-width, initial-scale=1.0">
-    <title>LED Controller Config</title>
-    <link rel="stylesheet" href="css/style.css">
-    <link rel="icon" href="data/favicon.ico">
-</head>
-<body>
-    <div class="container">
-        <header>
-            <h1>✈️ LED Controller</h1>
-            <p class="subtitle">Model Aircraft LED Configuration via Web-BLE</p>
-        </header>
-
-        <div class="card">
-            <h2>🔗 Connection</h2>
-            <div class="connection-status">
-                <span id="status-indicator" class="status-indicator disconnected"></span>
-                <span id="connection-status">Disconnected</span>
-            </div>
-            <button id="connect-btn" class="btn btn-primary">Connect via BLE</button>
-        </div>
-
-        <div id="config-section" class="card hidden">
-            <h2>⚙️ Configuration</h2>
-            
-            <div class="form-group">
-                <label for="led-pin-a">LED Strip A GPIO Pin</label>
-                <input type="number" id="led-pin-a" min="-1" max="48" value="-1">
-                <small>-1 = Disabled</small>
-            </div>
-
-            <div class="form-group">
-                <label for="led-pin-b">LED Strip B GPIO Pin</label>
-                <input type="number" id="led-pin-b" min="-1" max="48" value="-1">
-                <small>-1 = Disabled</small>
-            </div>
-
-            <div class="form-group">
-                <label for="pwm-pin">PWM Input GPIO Pin</label>
-                <input type="number" id="pwm-pin" min="-1" max="48" value="-1">
-                <small>-1 = Disabled</small>
-            </div>
-
-            <div class="form-group">
-                <label for="ble-timeout">BLE Auto-Off Timeout</label>
-                <select id="ble-timeout">
-                    <option value="0">Never</option>
-                    <option value="60">1 Minute</option>
-                    <option value="300">5 Minutes</option>
-                </select>
-            </div>
-
-            <button id="save-config-btn" class="btn btn-success">💾 Save Configuration</button>
-        </div>
-
-        <div id="control-section" class="card hidden">
-            <h2>🎮 Control</h2>
-            
-            <div class="current-mode">
-                <strong>Current Mode:</strong> <span id="current-mode">Black</span>
-            </div>
-
-            <div class="button-grid">
-                <button class="btn btn-mode" data-mode="0">⚫ Black</button>
-                <button class="btn btn-mode" data-mode="1">🔴 Red</button>
-                <button class="btn btn-mode" data-mode="2">🔵 Blue</button>
-                <button class="btn btn-mode" data-mode="3">🟢 Green</button>
-                <button class="btn btn-mode" data-mode="4">⚪ White</button>
-                <button class="btn btn-mode" data-mode="5">🌈 Rainbow</button>
-                <button class="btn btn-mode" data-mode="6">✨ Rainbow Glitter</button>
-                <button class="btn btn-mode" data-mode="7">🎊 Confetti</button>
-                <button class="btn btn-mode" data-mode="8">🌀 Sinelon</button>
-                <button class="btn btn-mode" data-mode="9">💓 BPM Pulse</button>
-                <button class="btn btn-mode" data-mode="10">🛩️ Navigation</button>
-                <button class="btn btn-mode" data-mode="11">🏃 Chase (Red)</button>
-                <button class="btn btn-mode" data-mode="12">🏃 Chase (RGB)</button>
-                <button class="btn btn-mode" data-mode="13">🎲 Random</button>
-            </div>
-
-            <div class="divider"></div>
-
-            <button id="pwm-emulate-btn" class="btn btn-secondary">⏭️ Next Mode (PWM Emulation)</button>
-        </div>
-
-        <div id="ota-section" class="card hidden">
-            <h2>🔄 Firmware Update</h2>
-            <div class="warning">
-                ⚠️ Warning: Firmware update will reset all settings!
-            </div>
-            
-            <div class="form-group">
-                <label for="firmware-file">Select Firmware File (.bin)</label>
-                <input type="file" id="firmware-file" accept=".bin">
-            </div>
-
-            <div id="ota-progress" class="progress-container hidden">
-                <div class="progress-bar" id="ota-progress-bar"></div>
-                <div class="progress-text" id="ota-progress-text">0%</div>
-            </div>
-
-            <button id="ota-upload-btn" class="btn btn-warning" disabled>📤 Upload Firmware</button>
-        </div>
-
-        <footer>
-            <p>ESP32 LED Controller © 2026</p>
-            <p><small>Supports ESP32 DevKitC & ESP32-C3 MINI</small></p>
-        </footer>
-    </div>
-
-    <script src="app/app.js"></script>
-</body>
-</html>